Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Fpjbvbgov Aycxom Seg Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: used, TECHNICAL DETAILS - Table dimensions : 680 x 450 [mm] - Max. part dimensions : 1000 x 550 x 220 [mm] - Max. part weight : 750 [kg] - Strokes X,Y, Z : 350 x 220 x 220[mm] - Strokes U,V : 350 x 220 [mm] - Wire diameter : 0,1 à 0,33 [mm] Febvbsv Anncogm Sspg - Max. wear : +/- 30 [°] - Three-phased supply tension : 400 [V] - Dimensions ( floor surface x height) : 3490 x 23254 x 2410 [mm] - Weight : 2700 [kg] - Welding hours : 350 [h] EQUIPMENT - CNC CHARMILLES - Touch screen LCD 19' TFT - AC CAM EASY 4.0 license - Remote control - Automatic threading and re-threading - Thermo stabilisation - Anti-collision - Large coil option : 16 and 25 [kg] - Central filter unit with 4 filters - 2 de-ionisation unit - CSW 900 cooling unit - Prearranged for rotary table

Condition: good (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Incl. radiator Fsbvbjvkdh Iogm Sjpg Incl. B-axle Hirschmann

Year of construction: 1991, Condition: used, Vertikal EDM machine with accessories as shown in the pictures. Fpobvbgsl Sm Nlom Sjg

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: BM-LHV, -NEW- Wire EDM levelling head with vice for round or rectangular workpieces up to 175 mm. Fpobvsv A T Izjbgm Ssg - Levelling head enables stable and precise alignment in 3 axes. - Levelling head can be mounted directly on machine table or on reference element (System 3R, Erowa, Hirschmann). - Dovetail mounting of vice allows height adjustment. - 4x90° indexing of vice upon request.

Condition: good (used), Year of construction: 1999, X Axis 410 mm Y Axis 260 mm Z Axis 170 mm Max. workpiece length 580 mm Max. workpiece width 350 mm Max. workpiece height 170 mm Max. workpiece weight 100 kg Fpsbvbgmjvbbwns Sjg CNC Type Worktank length 580 mm Worktank width350 mm Worktank height170 mm

Condition: excellent (used), 24 pieces Chuck adapter 20mm shank, equivalent to 3R-653 Fobsvgw Utjvbgm Sepg Mini holder chuck adapter 3R-653 for 20mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. pull rod 3R-605.1E

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY Febvbgouhq Rlom Sspg - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Year of construction: 2004, Condition: ready for operation (used), Working range X/Y/Z: 500mm/350mm/426mm, U-axis: +/-30°, V-axis: +/-70mm, resolution: 0.0001mm, positioning speed: 3m/min, tolerance for new machine: 4µm. Workpiece dimensions X/Y/Z: 1050mm/650mm/420mm, max. workpiece weight with/without bath: 400kg/800kg, wire diameter range: 0.2mm-0.33mm, wire speed: 60m-300m/min, weight: approx. 4000kg, control: AgieVision 5. Including a mobile electronic manual control unit with AgieJogger, DA Progress integrated dielectrum unit, 65A generator and wire threading device. Documentation available. On-site inspection is possible. Fobvbgevtb Htem Sopg

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. Fpjbvbgeu Thd Hem Seg XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.)

Condition: refurbished (used), Year of construction: 2006, Status: overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 Ampere - multipulse Travel (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 13-fold pick-up linear changer Work bowl (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Fpsbvstxnybobgm Sog Accessories - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] Fpobvbgmeuhq Rfe Seg WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Year of construction: 2002, Condition: ready for operation (used), Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available. Fjbvbger Nd Enem Sspg

Year of construction: 1983, Condition: used, Jig, Charmilles Robocut 220 workspace X 450 mm Febvsbq Hmmsbgm Sjpg Y: 340 mm Z: 250 mm

Condition: used, TECHNICAL DETAILS Fobvbeuhcbijgm Sepg - Strokes X x Y x Z : 350 x 250 x 350 [mm] - Max. part dimensions : 650 x 580 x 250 [mm] - Max. part weight : 400 [kg] - Machining intensity : 72 [A] - Tools magazine capacity : 28 - Dielectric volume : 415 [l] - Machine floor space : 2.689 x 1.855 [mm] - Machine height : 2.593 [mm] - Machine weight : 3.000 [kg] - Welding hours : 39.554 [h] EQUIPMENT - CNC AGIEVISION with color screen LCD : 10,4 ['] - Deported electronic crank-handle - Axis C - Spindle chuck : EROWA - Automatic retractable tank - Integrated filtration : DAI 2

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Febsuyk Rljvbgm Sopg

Condition: used, fully functional die sinking machine Charmilles D20 Fpsbvbeccnxwegm Ssg

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] Fjbjuhcbcovbgm Sspg EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Fsbvbju Ilbujgm Sepg

Condition: used, TECHNICAL DETAILS Fsbvsuhca Sobgm Sopg - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Year of construction: 1997, Condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Fpsbvbgmsvc Ha Ro Ssg

Year of construction: 1994, Condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/350mm, tank dimensions X/Y/Z: 670mm/600mm/250mm, table dimensions X/Y: 800mm/600mm, max. workpiece dimensions X/Y/Z: 1070mm/735mm/450mm, max. workpiece electrode weight: approx. 400kg/100kg, speed: 820mm/min. Dimensions X/Y/Z: approx. 2000mm/2500mm/3000mm, weight: approx. 3000kg, control: Agiematic T. Documentation available. Fpsbvetu I Umjbgm Sjg

Year of construction: 2017, Condition: ready for operation (used), X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation. Fjbvbgerici Dem Sepg

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Fsbvbgmovb Hbre Sjpg

Year of construction: 1992, Condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Febvsp R R Idebgm Sspg