Condition: good (used), Year of construction: 2001, Fanuc Alpha 1iB- -year 2001/09 -CNC control FANUC 180is-W - max. part dimensions: 800 x 730 x 300 mm - max. part weight: 1,000 kg - X x Y x Z travel: 550 x 370 x 310 mm - U x V travel: 120 x 120 mm - wire diameter: 0.1 - 0.33 mm - wire tension: 80 -2500 g - spool weight: 10 kg - installed power: 13 kVA Dobouankto Eahg Docg - part weight: 1,000 kg - refrigeration unit Option - large tank 1100 x 730 [mm]

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, Functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, net weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Dcjb Eevvlhyeahg Deg Option 0.1 mm. Available in our workshop in Semsales during March.

Condition: excellent (used), Year of construction: 2003, operating hours: 2,916 h, Functionality: fully functional, machine/vehicle number: P 032B1591, workpiece weight (max.): 1,000 kg, feed length X-axis: 550 mm, feed length Y-axis: 370 mm, feed length Z-axis: 410 mm, feed rate X-axis: 900 m/min, feed rate Y-axis: 900 m/min, feed rate Z-axis: 900 m/min, continuous power (apparent): 13 kVA, feed length W-axis: 120 mm, The subject of the sale is a Fanuc Robocut Alpha-1iB EDM machine. The year of production of the machine is 2003. The machine has worked 2916 hours, including 178 hours of cutting. The machine has been described by the expert as efficient and in very good condition. Axis travel: X: 550mm / 900 mm/min Dcsb Eahgsvwk Ale Dsg Y: 370mm / 900 mm/min U: 120mm / 450 mm/min V: 120mm / 450 mm/min Z: 410mm / 900 mm/min

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 mS Year of manufacture 2015 Die-sinking EDM machine in C-design Fixed table with lowerable container Travels (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (optional) Max. Electrode weight: 50 kg Max. Inertia: 2000 kgcm² 32-fold electrode changer AC FORM HMI user interface Operation via 15" LCD color display with touchscreen Dsb Easu Td Uhshg Djcg Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg The machine is cleaned and serviced by us after receipt of the order. This is followed by an erosion test. We will be happy to commission the machine on your premises and provide operating instructions. Optional: - Transportation - Cooling unit - Dielectric - Clamping device

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Djb Eahet Hxbkeg Docg Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2007, Table dimensions 560x400 mm Dsbotph Tuo Eahg Dscg Max. Workpiece dimensions 880 x 550 x 225 mm Travel distances X 320 mm Y 220 mm Z 320 mm C 360 °

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Dcsb Eovuqxbeahg Dog Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 550 mm, feed length Y-axis: 300 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 3,000 kg, Max table speed / Max table speed: 2000 mm/min Max conical cutting angle / Max conical cutting angle: ±30º/95 mm Ø wire diameter: 0.1-0.35 mm Dcsb Eoul Ugmeahg Dsg Type of wire spool: DIN 100-125-160-200-DIN 355 (45 kg max) Min hole diameter: 1.5 mm Max power: 14 KVA

Condition: good (used), Year of construction: 2005, operating hours: 60,000 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, workpiece width (max.): 1,050 mm, No reserve price - guaranteed sale at the highest bid! Condition: Machine has been resealed at the basin TECHNICAL DETAILS Max. workpiece dimensions (W x D x H): 1,050 mm x 800 mm x 295 mm Max. workpiece weight: 1,500 kg Max. workpiece weight: 780 x 630 kg Table dimensions: 780 x 630 kg Axes movement range (X, Y, Z): 500 mm x 350 mm x 300 mm Axis speed (rapid traverse): 0.1 m/s Wire diameter: 0.1 - 0.3 mm Wire tension: 0.1 - 0.25 N Bevel cut unit axis travel range (U x V): ±21° x ±21° Detection method for each axis position (X, Y, U, V): Linear scale Dcob Esvphzvoahg Dog Dielectric liquid tank Working volume: 750 l Filter flow rate: 60 l/min Filtration accuracy: 3 μm Filter element: Paper filter x 2 Dielectric conductivity (range): 0.5 - 30 x 10^4 Ωcm External dimensions (W x D x H): 880 mm x 2,070 mm x 1,565 mm Weight (dry): 400 kg MACHINE DETAILS External dimensions (W x D x H): 2,210 mm x 2,873 mm x 2,150 mm Weight: 3,500 kg

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, AGIECUT Classic 2S Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Dcobsuzvkgj Eahg Dsg Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 600 h, Functionality: fully functional, New price 110T € TECHNICAL DETAILS System: 3R with 20-fold ATC Dcjb Eahotyyhtjg Dog Capacity of the work tank: 1500 x 940 x 520 mm Work table size: 1000 x 600 mm Longitudinal displacement (X-axis): 600mm Transverse displacement (Y-axis): 450mm Z-axis travel (Z-axis): 400mm Distance between clamping plate and table: 350~750 mm Max. Electrode weight: 250 kg Max. Weight of the workpiece: 3000 kg Capacity of the liquid tank: 1100 L MACHINE DETAILS External dimensions of the machine (WxDxH): 2850 x 2700 x 2610 mm Weight of the machine: 3600 kg Max. Processing current: 60 A / 90 A (optional) Max. Power consumption: 7 KVA / 10 KVA Max. Processing rate: 400 mm3/min Min. electrode wear rate: 0.12% Best surface finish: Ra 0.2 μm Min. D. R. O. Resolution (mm): 0.001mm Weight of the generator: 320 kgs

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, For sale is a start hole eroding machine bes YGS-43Z Features High drilling speed Dcjb Eahgohmk Ams Deg low electrode wear probing functions for edge and circle table size (width x depth) 820 x 585 mm Travel X/Y/Z 400 x 300 x 400 mm Motorized coarse adjustment Z 400 mm Max. Workpiece height 350 mm Max. Workpiece weight 500 kg Electrode diameter 0.3 - 3 mm External dimensions of the machine 900 x 1000 x 2000 mm Net weight of the machine 600 kg Filtration integrated, distilled water Programmable Z-axis standard Total power supply 3 KW

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Dcsb Eahjvuqtfsg Dsg Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: used, Year of construction: 1996, Drahterodiermaschine (765), Fabr. Charmilles, Typ ROBOFIL 510, Bj 1996, SN 550492, Anschlussleistung 10,0 kVA, Maschinengewicht 3.350 kg, 5-achsig, Verfahrweg X/Y/Z 700 x 400 x 400 mm, Aufspannplatte 1.200 x 700 mm, Tischbelastung max. 1,200 kg, Werkzeugspannsystem, Fabr. Hirschmann, Steuerung, Fabr. Charmilles, defekt, Maschine fährt nicht hoch (Softwarefehler) Dcebeu Ava Rs Eahg Dsg

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Dcsb Esuuz Iisahg Dsg Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex Djb Eahgjvppxpo Decg 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dcob Eahgovuqmfo Dog Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, AGIETRON Hyperspark 2 HS iQ Year of construction 2008 Travel: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. Workpiece dimensions (L x W x H): 650 x 580 x 250 mm Max. Workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); 28-position electrode changer Work bowl can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high-performance generator with 72 A Removal rate copper/steel: 550 mm³/min Removal rate graphite/steel: 600 mm³/min Best achievable surface Ra 0.2 µm 15" LCD color screen, lifting keyboard and mouse AGIEJOGGER with LCD display and electronic handwheel Dcjbsut Uzge Eahg Djg Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm Incl. 6-month warranty on parts and service; Incl. commissioning and instruction on site; The machine is cleaned, overhauled and tested by us after receipt of the order. We are also happy to commission the machine on your premises. We also offer the following as an option: - transportation - cooler - Dielectric - Clamping device

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters Deb Eahovppw Ssg Dscg EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, Charmilles ROBOFORM 550 Year of construction 2006 Construction: - short C-frame with fixed table - Automatically lowerable container Travel: X = 600 mm, Y = 400 mm, Z = 450 mm; Max. Workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. Workpiece weight: 1600 kg Max. Electrode weight: 100 kg Min. /max. distance between table and quill: 150-600 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); Incl. 16x electrode changer Incl. C-axis for rotation, indexing and erosion Max. Electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handbox Integrated connections: Ethernet RJ45, floppy disk drive, CD-Rom drive Debsurk Dbe Eahg Decg Machine weight (net): 4400 kg Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is currently still being used by our customer and will be dismantled by our specialist staff. After ordering, the Roboform will be cleaned, serviced and tested by us. Optional: - Transportation - Cooler - Dielectric - Commissioning

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Debjt I Dtns Eahg Djcg Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.

Year of construction: 2000, Condition: refurbished (used), AGIECUT Challenge 3 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm travel U/V-axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Dcsb Esfdl N Isahg Deg Achievable surface quality: Ra: 0.3 µm Average contour tolerance Tkm +/- 5 µm Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable setup Including AGIESETUP 3D AGIEVISION Control AGIE HSS Generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6 months warranty; On request we can put the machine into operation and carry out a training on site.

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of construction 2015 Control unit HMI 1 Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is currently still in use at the customer and will be cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site Dcjb Eahett Aknog Djg - Cooling unit - Transportation - Clamping bar set

Year of construction: 2002, Condition: refurbished (used), AGIETRON IMPACT 2, year of manufacture 2002; AGIEVISION 3 control, Pentium III Travels: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm o. 820 x 420 x 250 mm Max. workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of choice (Erowa / 3R Systems); 28-position electrode changer; Working tank can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high power generator with 72 A Removal rate copper/steel: 450 mm³/min Removal rate graphite/steel: 530 mm³/min Best achievable surface Ra 0,2 µm 10,4" LCD colour screen, lift keyboard and mouse, JOGBOX for axis procedure Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm Incl. 6-month warranty on parts and service; Incl. commissioning and instruction on site; Free loading! Dcob Eahgog H I Spe Djg Optional: Transport, cooler, oil, clamping device

Year of construction: 2006, Condition: refurbished (used), High-precision wire EDM AGIE Vertex 1 Year 2006 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Taper angle : 3° at 80 mm height For wire diameters from 0,10 mm to 0,2 mm Dcebjpahpgs Eahg Deg Best surface: Ra=0,05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg Incl. AGIEJOGGER Handbox 15" LCD-colour display with keyboard and mouse AGIEVISION-Control Incl. AGIESETUP 3D Inkl. AGIEDUO Twin-Wire System to automatically change wire diameters during operation The machine will be cleaned and completely refurbished by one of our specialists for high-precision wire edm. A test cut in our facilities can be made for approval. We also offer installation and training.