Used Extruders & extrusion lines for sale (231)

Year of construction: 1995, Condition: excellent (used), 1800mm Wide Kuhne Coextrusion Sheet Line. 150mm, 70mm, 45mm Extruders, Edi Die, 1800mm X 500mm Diameter Roll Stack, Haul Off Guillotine 1995 * 150mm Kuhne 33D vented primary extruder with electrically heated, fan cooled barrel with PS/ABS screw. Main motor 371kw. Screen changer, gear pump static mixer and 3 layer feedblock with replaceable inserts Cebov Tww Is E Ihf Terb * 70mm Kuhne coextruder 33D vented. Electrically heated fan cooled barrel. Screen changer and gear pump * 45mm Kuhne coextruder with screen changer * 1800mm wide Kuhne model GA5V/1800 calender with 500mm diameter rolls individual servo motors. * Upgraded pressurised 3 zone thermoregulation with heaters, pumps and heat exchangers.

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Csbev U Nnus E Ihf Torb Hourly output 250-400 kg depending on the product

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Cobsv U Da Se E Ihf Terb Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2016, Condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Creb E Ijv Uz Awshf Tob

Year of construction: 2016, Condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Measurements height 4800 mm Crsb Eeumpade Ihf Tjb Control Unit Model PLC This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Application Types Extrusion

Year of construction: 1995, Condition: used, Extrusion line Starex 1000 - without winding! We have no winding available for this machine, customer has to get his own winders. Doser - Maguire Machine has been in production from 1996 24/7 until last year. In 2024 it was working perfectly. Crjb E Ihfowawpie Tob Machine is sold with no winders and no chiller, please keep that on mind.

Condition: used, with 175mm Erwepa single screw extruder, gear pump, 2400mm die, 2400mm x 500mm rolls haul off in line knives. Creb E Ijv Twnmjhf Tob * 175mm primary extruder Erwepa Davis Standard 40 D vented with 350kw dc motor and drive. Temperature panel. Hydraulic lantern slide screen changer, Large 90/90 gear pump with gearbox and drive. Gravimetric Maguire 4 zone blender with hopper loaders. * 2400mm wide Reifenhauser 3 roll polishing stack with thermoregulation, haul off. 2400mmx500mm individual drives. Variable speed haul off. In line knives. Large pneumatic roll closing. * Upgraded pump group - 3 zone

Condition: new, Functionality: fully functional, New and unused machine. - Berstorff Twin screw Extruder ZE 130A -Extruder Screw 2x140 mm L/D 30:1 Building Year: 1988 (unused) Engine: DC Motor - 250 kW Screw-Rotation: 300 Rpm Extruder-Heating: 70 kW With two degassing zones Crsbsd Htygs E Ihf Tjb

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW Crob Eev Uqf Is Ihf Tob EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Year of construction: 2025, Condition: new, compounder with segmented screws, 25 mm - 32 l/d with atmosperic degassing, melt pressure sensor and die-plate Cob Ejf Uc Uyj Ihf Tsrb die-face pelletizer made from stainless steel, housing is swivelling lenght of granules is adjustable by means of the cutting speed This compounder is built to order.

Condition: good (used), Year of construction: 1996, operating hours: 40,794 h, Functionality: fully functional, Complete Battenfeld Cincinnati line, supplemented by a Sica A10-63 bundling unit. Crjb E Ihfjvbik Ao Tsb

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Crobovbcbue E Ihf Teb Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Cjbsvcynus E Ihf Terb

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW Crob E Ijrg Ebcshf Teb - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: ready for operation (used), An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible. Crsb Ejv N Izve Ihf Tob

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available ! Crsbsuxa Abe E Ihf Tjb

Year of construction: 2024, Condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Cob E Ihjhx Elfof Torb Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, Make: Viscotec Model: DeCON20 Year: 2015 Condition: Excellent Use: Dryer / Decontamination Unit Main data: Max. output with flakes [500kg/h]* Net volume of reactor [2.6 m3] Installed power [125 kVA]* Energy consumption [0.10-0.15 kWh/kg]* Cebjrdgygo E Ihf Torb Max. surface moisture of input material [1%] Output humidity [

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. Crjb E Isvcyk Nehf Tsb The extruder was used for powder coatings

Year of construction: 1989, operating hours: 24,048 h, Condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW Crjb E Ihjvuzqzef Tsb

Year of construction: 2013, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Crjb E Ihfov Ip S Hj Teb

Year of construction: 2013, operating hours: 100 h, Condition: used, Functionality: unexamined, Platex - Planetary System Extruder The planetary system consists of one hollow barrel and a main spindle (screw) and several satellite screws (spindles) which work harmoniously with each other enabling the best-known mixing and plastification process. Planetary extruder system compared to other extruder systems provides a much better plastification thanks to the homogeneous and very efficient raw material mixing action. Our Planetary Extruder performs at least 10 times better plastification and homogeneity compared to the Twin-Screw or Single-Screw Extruders. Cob E Ihfsukv She Terb

Year of construction: 2011, operating hours: 20 h, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 2011-340389-0020, Machine was in production of HIPS and PET semi-finished products until 2020. ELIN, water-cooled main motor 160KW. Converted for repelletizing at extrusion height 1150mm. Control cabinet rebuilt according to the latest technology with Siemens S7-1500 and control components. Control via Siemens HMI TP1900. Degassing screw with max. 4 degassing zones. Strand head with static screen carrier newly constructed. 12x4mm strand holes. Crebovlk Abe E Ihf Tjb Optionally (not included in the offer price) with downstream units such as water basin, granulator, classifying screen and bagging station. Volumetric feeders from Brabender also possible! Sale due to reorientation and replacement investment.

Year of construction: 2000, Condition: refurbished (used), machine/vehicle number: 19018, KREYENBORG DOUBLE SCREEN CHANGER K-SWE-101/121/RS Year of construction 07.2000 With accessories: Various perforated disks, sieves etc. The screen changer was overhauled by NORDSON General for € 18,000 Application: 2-layer extrusion or single operation Ceb E Ijufgfgehf Tjrb

Year of construction: 2014, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Cobjv Ip Syo E Ihf Torb