Used extruders & extrusion lines for sale (224)

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Iijdpeqpft Isfx Agzjk - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Iedpfx Aepaiaiogzsik Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Feed: electrically back and forth Iiodjiidm Tspfx Agzok Year of construction: 2000 Material: stainless steel

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Iodpfxjxlcfke Agzeik Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1994, condition: used, functionality: fully functional, machine/vehicle number: 8084/77/30, Vobau saw for 800mm PVC profiles Iijdexgh Uaopfx Agzjk

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Manufacturer Reifenhauser Model PP Extrusion Line Year 2001 Condition Very Good Stock Number 00027 Materials PP Max PP Material Thickness 300 - 2000 μ Ijdpfx Aswzkmwsgzsik Max Sheet Width 1050 mm Max Output 600 kg/h at 0.8-1.2mm sheet Max Roll Diameter 800 mm Power Supply 380V 60Hz All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) Iedpfxopah U To Agzoik DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 Iisdpfsxiy R Eox Agzsk 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15, IDE saw 800 mm Ijdpfx Aexgh Tcjgzoik

Year of construction: 2004, condition: excellent (used), functionality: fully functional, SICA SOCKETING MACHINE BA.2F.1T. 63-315 Application: KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 2004 1 socket per cycle Socket tool: 160x4.6 Iiedpjxiy Nusfx Agzok The socketing machine is in very good condition, still in operation, and will be removed from production in 3-4 months.

Condition: used, Year of construction: 1996, functionality: fully functional, IDE haul-off unit 300 mm Iedpexgh R Ijfx Agzsik

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 124, IDE Haul Off 500 mm Iodpfx Ajxgh Rujgzjik

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 245, IDE haul-off unit 300 mm Iodpfexgh N Dex Agzjik

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 113, IDE haul-off unit 300 mm Iisdpfx Aexgh Nqjgzjk

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 1006882, Soft PVC Coextruder Ijdpfx Ajxgh Itegzeik

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Iiedpfexgh Imex Agzjk

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Iodpfxexgh H Ao Agzsik

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Isdpfx Agoxgh Dzjzoik

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Iijdpoxghz Hjfx Agzok

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Iodpfsxghy Nsx Agzoik

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Isdpfx Ajxghxrogzjik

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 8084/77/10, Haul-off 350 mm Iiodpfxexghq Io Agzok

Year of construction: 1994, condition: used, machine/vehicle number: 8084/77/01, Caliber Table Profile Extrusion Iisdexghqhspfx Agzok

Year of construction: 1988, condition: used, machine/vehicle number: 3509, Bandera Caliber table Iodpsxgdxnofx Agzeik

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 7001296, Greiner Caliber table Iijdpsxgdp Hefx Agzsk