Used finger jointing lines for sale (64)

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) Gbjdpfx Agowclkyj Tsg - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t Gjdpfot Ubn Nsx Ag Tobg DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Installed power kW 1.1 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Weight of the device kg ~450

Condition: excellent (used), Year of construction: 2011, Famad HSKG 6m frame press Technical data: Maximum workpiece dimensions: length up to 6050 mm, width up to 160 mm Total weight of the machine: 4800 kg Gedpfxeukg Dze Ag Tjbg

Condition: excellent (used), Year of construction: 2000, The line is fully operational, modernized in 2019. Among others, : Hydraulic installations and control. minimum material thickness - 20mm Godpeim Ez Dsfx Ag Tjbg max material thickness - 130mm minimum material width - 30mm max material width - 130mm minimum input length of the material - 250mm max input length of the material - 1600mm minimum output length of the material - 250mm max output length of the material - 300mm

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 Gbedjwry I Espfx Ag Teg - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Gedpfx Asw Uf Tkjg Tobg Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T Gsdpfow E Etyjx Ag Tebg MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station The machine has been checked, is functional, Gbodpfev Ihdzjx Ag Teg We can send a video.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. Gedpfx Agouiz I Re Tebg 6. joint type: - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Year of construction: 1981, operating hours: 24 h, condition: like new (used), machine/vehicle number: 14316, MV/LV three-phase transformer in oil 15kv 400v 50hz 400 Kva year 1981 weight about 1380kg silicon oil kg.300. The transformer is in excellent condition, PCB-free silicone oil Gbodpeiwfg Sefx Ag Tog

Condition: new, Year of construction: 2010, functionality: fully functional, Equipment: CE marking, double-sided, Linija za duzinsko spajanje sa dva frezera.Presa duzine 6000 mm. Masina je nova i nikada nije koriscena.Uz masinu idu svi pripadajuci alati. Gbedpfx Aewptnmjg Teg

Condition: reconditioned (used), Year of construction: 2007, Available Immediately: Semi-Automatic Line for Finger-Jointing Wooden Elements Up to 6 Meters in Length The line has undergone a complete overhaul. The finger jointer is equipped with a table featuring a conveyor belt and an additional rotary table. This setup simplifies and speeds up machine operation, thereby increasing efficiency. A new glue nozzle for automatic glue application and a new saw-chipper are included. The press has a fixed jointing length of 6 meters. Godpfetyy Exex Ag Tobg Finger Jointer Technical Specifications: • Spindle diameter: 50 x 210 mm • Spindle speed: 5,500 rpm • Motor: 15 kW • Tool dimensions: 250 x 150 mm • Special chipper: 300 x 8 mm • Motor: 6 kW / 3,000 rpm • Infinitely variable feed table • Working width x height: 600 x 30 x 150 mm Hydraulic Press: • Working length: 6 meters • Lamella width up to 160 mm, thickness up to 80 mm, gluing length per cycle: 6,000 mm • Number of pneumatic pistons: 4 (2 from above, 2 from below) • Air pressure: 5–8 bar • Air consumption: 300 l/cycle • Saw blade diameter: 300 mm • Spindle diameter: 30 mm • Motor power: 1.5 kW • Saw movement: pneumatic Dimensions (L x W x H): 7,700 x 1,160 x 1,500 mm Weight: 1,500 kg Optional services for an additional fee: installation, commissioning, and training on machine operation.

Condition: excellent (used), operating hours: 10 h, functionality: fully functional, Grecon Dimter Ultra automatic wood joining line Machine after major renovation. Specification: Tenner: Sawheadstock: - Spindle speed: 3000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling headstock: - Shank diameter: Ø50 mm - Usable shank length: 210 mm - Max. tool diameter: Ø250 mm-Ø150 mm - Spindle speed: 6000 rpm - Milling motor: 15 kW / 3000 rpm - Chip extraction: Ø150 mm Feed table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Steplessly adjustable Dust extraction: Chipper exhaust port diameter: Ø100 mm Mill exhaust nozzle diameter: Ø150 mm Dust extraction capacity (flow rate): ~2400 m3/h Pneumatic system: Working pressure: 6 bar Air requirement: ~2.5 m3/h at 6 bar (15 Nm3/h) CONTI M 6/6000 longitudinal wood joining press: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6000+15-50 mm Gbedpfxjuddvaj Ag Teg - Pressing force: 3 – 7.5 T (3 000 – 7500 daN) Circular saw: - Saw diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3000 rpm Dust extraction: - Saw exhaust nozzle diameter: Ø100 mm - Dust extraction efficiency (flow rate): ~400 m3/h Pneumatic installation: - Working pressure: 6 bar - Air demand: ~2.5 m3/h at 6 bar (15 Nm3/h) Scope of renovation work: 1. Cleaning the machine bodies and applying new paint 2. Replacing with new bearings on: the main spindle of the tenoner; on the saw headstock of the press; linear bearings on the guide of the tenoner table carriage; bearings on the working belts. 3. Installing a new glue nozzle with a pitch of 3.8 mm on the tenoner body, installing a glue supply tank with a safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for actuators, solenoid valves and other pneumatic elements in machines with new ones; 7. Replacement of gear wheels and double-row chain on the belt-chain feeder of the press. 8. Regeneration of electromagnetic brakes on the tenoning machine 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators Replacement of worn solenoid valves with new ones. 10. Replacement of graphic panels on the tenoning machine cabinet, on the press cabinet, on the small press panel with new ones. 11. Replacement of buttons, lamps and switches on panels and control boxes with new ones. Replacement of boxes with connectors with new ones. 12. Replacement of controllers supervising the operation of the tenoning machine and press with new ones. Adjustment of the machine control program to the user's needs 13. Installation of a new inverter on the press rollers and on the pusher of the receiving table projector; 14. Maintenance of electrical installations in control cabinets, modernization and preparation of electrical diagrams. 15. Installation of covers, grids and necessary descriptions, stickers and health and safety signs as well as manufacturer's logos and nameplates. 16. Replacement of V-belts with new ones, checking pulleys; gear motors and engines; 17. Replacement of limit switches, inductive and optical sensors (photocells) with new ones. We specialize in wood joining machines. Installation, start-up and training of employees in the scope of machine operation in Poland included in the price, in other countries for an additional fee. We provide service and access to spare parts.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 5 h, Automatic single-tenon line for connecting wooden elements to length. The presented machine configuration allows for maximum efficiency of up to 4000mb/shift. The use of a receiving table with automatic feeding of strips to the conveyor entering the PHSL press allows the line to be operated by a single employee feeding the elements. The line works in an automatic cycle with manual feeding of material. Year of production: 2008 Machine after renovation, in very good technical condition. Machine of Polish production. Technical data: Godpfx Agsrpa Apo Tobg - Width of the milling-tenoning machine input package: 600mm - Width of glued elements: 40 ÷ 155mm - Length of glued elements: 170 ÷ 900mm - Thickness of glued elements: 20 ÷ 70mm - Working air pressure: 0.6MPa - Compressed air demand: 18m/h - Working efficiency: 1.5 cycles/min. - Length of glued element: 6600mm - Working voltage V AC: 3 x 400+ N + PE - Control voltage: 24V DC For an additional fee, the machine can be installed and started.