Condition: good (used), Norton flat grinding machine Type: MGS 17A X-travel: 540 mm Djlsi Eqzweq Unfzjcg Speed: 2880 RPM Bed: 660 x 150 mm Dimensions: 140x110x160 cm LxWxH

Condition: used, Year of construction: 1980, grinding length 440 mm Dcslqev U Dmfe Unfzeg centre height 125 mm centre distance 400 mm grinding wheel size ø400 x 50 x 127 mm turning speed range - grinding spindle 1500 -2420 U/min turning speed range - power take off spindle 30 - 640 U/min table speed -stepless- 0,05 -5,5 m/min spindle bore 28 mm grinding spindle - swivable +/- 45 ° dimensions of the machine ca. 2 x 1,6 m total power requirement 5 kW weight of the machine ca. 2,2 t Speed range - grinding spindle: 1500 / 1625 / 1800 / 2000 / 2200 / 2420 rpm Accessories: Coolant system Grinding disc Machine feet

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space required: 1050 x 580 x 1200 mm Weight approx.: 140 kg Dcjlq Unfov D E Szjzjg

Condition: used, Cup Grinding Machine Manufacturer: Delta Type: LF-350 Dcjlq Unjv Tqugofzog Grinding length: approx. 360 mm Grinding width: approx. 155 mm Max. grinding height: approx. 280 mm Magnetic clamping surface: 350 x 150 mm Drive power: approx. 3 kW Grinding spindle speed: approx. 2840 rpm Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Z-feed: manual Grinding movement: manual Equipment: Magnetic table Grinding wheel Grinding wheel protection Splash guard enclosure Space required: 1200 x 1200 x 1800 mm (L x W x H) Weight: approx. 450 kg The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale. The purchased item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, body, or health.

Condition: ready for operation (used), Year of construction: 2003, Control: Heidenhain Grinding length 1000 mm Center height 175 mm B-axis Grinding wheel dimension 400 mm Dolq Unfjr Dbltozecg Grinding spindle speed 2000 rpm Cooling system Measuring probe Hydrostatics

Year of construction: 2001, Condition: like new (used), CN: SIEMENS 810 G Precision spindle with bearing bearing support Spindle diameter: 120 mm Rotation speed : From 1100 to 6000 rpm Grinding wheel diameter: 400 mm Diameter of receiving bore: 127 mm Max. automatic travel: 320 mm Cross travel speed of the carriage: 1 to 4000 mm/min. Table clamping area: 1100 x 300 mm Dcelq Usfdztrenfzsg Max. distance between table centre and spindle centre: 600 mm Max. table load with magnetic clamping plate: 350 kg

Condition: ready for operation (used), OMN RV500 bowl grinder Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium The seller is not liable for typographical or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT OMN RV500 cup grinder Dcslq Ueurm Ucjnfzsg Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT OMN RV500 Schüsselmühle Transport dimensions: 100x70x185 cm (LxWxH) Tischabmessungen: 160x300 mm Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Year of construction: 2015, Condition: ready for operation (used), Main Drive Number of axis 2 Dsljvz Iuyeq Unfzecg This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information. Application Types Grinding

Condition: good (used), Year of construction: 1990, operating hours: 8,587 h, machine/vehicle number: 6581/90-09, Drying system especially for sensitive workpieces with deep, small holes in which desiccants get stuck. Stainless steel wire mesh belt, Belt length: 3765 mm Drying tunnel length: 2000 mm Belt width: 600 mm Deljrntydjq Unfzecg Passage height 250 mm Max. heating capacity: 22.5 kW (adjustable) Circulation rate up to: 3000 m³/h and up to 150 °C Dimensions: L3765 x D 1000 x H 1325 mm.

Condition: used, Technical details: grinding length: 600 mm centre height: 180 mm swing dia.: 360 mm workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm Dcolq Unfjrkr U Ejzeg grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine Dolqeuuik Ss Unfzjcg make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,650 mm, total length: 4,640 mm, total height: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, overall weight: 1,200 kg, input voltage: 400 V, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, grinding width: 950 mm, grinding belt speed: 25 mm/s, grinding belt length: 9,000 mm, extraction connection diameter: 180 mm, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, height adjustment type: electric, grinding length: 2,500 mm, motor speed: 1,435 rpm, input frequency: 50 Hz, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide Dolq Unfjv S Sr Rjzscg - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: ready for operation (used), Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With several extra rolls Location: Hamont-Achel, Belgium Transport possible at more price Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Grit pipe grinder GR 75 belt sander offered. Dimensions: 140cm x 60cm x 100cm (LxWxH) 380v With various extra rollers Location: Hamont-Achel, Belgium Transport possible at extra cost Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Angeboten wird der Kornrohrschleifer GR 75 Bandschleifer. Dimensions: 140 cm x 60 cm x 100 cm (LxWxH). 380 V Mit diversen Zusatzrollen Standort: Hamont-Achel, Belgium Transport gegen Aufpreis möglich Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Dcjlevily Njq Unfzsg Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Year of construction: 2013, operating hours: 14,044 h, Condition: ready for operation (used), General Data Measurements width 960 Measurements depth 1502 Measurements height 1900 Machine weight 850 Additional Equipment Coolant System: Coolant tank capacity: approx. 125 liters This grinding machine was manufactured in 2013. It is designed for face and top grinding of TCT circular saw blades, accommodating blade diameters from 80 to 650 mm and tooth pitches from 6 to 100 mm. Features include adjustable hook angles from -10° to +30° and clearance angles from 5° to 25°. It supports a grinding wheel diameter of 125 mm and operates at speeds up to 20 teeth/min. For more information about this grinding machine, please reach out to us. Dceleuc Hnvsq Unfzog Application Types Grinding

Condition: good (used), Grinding wheel max. 300 x 40 x 76 mm left fine + right coarse grain Motor 1.5 kW Speed 1500 rpm Delevq Icioq Unfzjcg Dimensions: W 460 x H 960 mm (grinding shaft) Stand not original Total weight approx. 140 kg Connection cable with CEE 16 A plug

Condition: ready for operation (used), Functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 375 mm, For sale is an ELB Optimal 6375ND surface grinding machine. The machine is fully functional, currently in our warehouse, and ready for shipment. Dcjlq Uev Tp H Usnfzog Grinding length: 600 mm Grinding width: 375 mm Max. workpiece height: 375 mm Table load: 300 kg Feed: Automatic Drive power: 3.7 / 4.7 kW Weight: approx. 3500 kg Accessories: Magnetic plate

Condition: ready for operation (used), Belt Grinder, Pedestal Belt Grinder,Used machine Manufacturer: Multi-Tool A/S Type: GS 75 Abrasive belt size: 75 mm Electrical specifications: 400V; 8.8A; 4kW; 2890 RPM Overall dimensions: Dolq Unsv Ilzqofzocg Length: 1000 mm Width: 650 mm Height: 950 mm Weight: 110 kg

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm Djlq Ujq H Ap Nsnfzscg bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH

Year of construction: 2015, Condition: ready for operation (used), General Data Measurements width 2800 Measurements depth 3000 Djlq Ueu Txhionfzecg Measurements height 2500 Main Drive Main motor power 3.7 kW Number of axis 3 Workpiece Workpiece Z 375 mm This 3-axis GEIBEL & HOTZ FS 640 SD grinding machine was manufactured in 2015. It features a max grinding length of 600 mm, width of 400 mm, and a workpiece height of 375 mm. The grinding spindle is horizontally fitted, powered by a 3.7 kW motor. Dimensions are 3000x2800x2500 mm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 640 SD machine we have for sale. Contact us for more information. Application Types Grinding

Condition: good (used), Year of construction: 1963, Functionality: fully functional, machine/vehicle number: 2885, Automatic grinding wheel infeed, automatic cross adjustment, Table longitudinal movement hydraulically or manually, Dslq Unfsrk Rcgszscg Wet grinding device, electromagnetic clamping plate, accessories Sanding length: 500 mm sanding width: 200 mm Max. workpiece height: 250 mm speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1.6 t Operating instructions with circuit diagrams Machine can be demonstrated

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm Dcolq Unfoda A Eiozjg - power consumption: ca. 8 kW - weight: 2000 kg

Condition: new, Year of construction: 2025, with suction automatic sanding belt centering tool-free sanding belt change sanding belt 2000 x 150 mm surface sanding range 500 mm belt speed 15/30 m/s weight 120 kg motor pole-switchable 2.2/3.75 kW suction motor 0.37 kW machine dimensions 950 x 430 x 1050 mm scope of delivery: incl. sanding belt grain 60 dust bag 1 year guarantee Dolqsckk Rij Unfzscg delivery: free of charge including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1970, Magnetic surface: 1250 x 400 mm Dolq Unfovt A Hhjzjcg Grinding area: 1250 x 500 mm Dimensions LxWxH: 3700 x 1600 x 2500 mm Machine weight: approx. 4500 kg

Condition: new, Year of construction: 2025, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 15/30 m/s - colour: RAL 9007 - belt motor: 400 V 3,0/3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg Delqobb R N Io Unfzjcg

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Wet sanding device Dcjlq Unfstu Il Tszog