English
German German German English English French French Spanish Spanish Italian Dutch Polish Russian Belarusian Ukrainian Estonian Turkish English English Czech Danish Finnish Swedish Norwegian Bokmål Maltese Greek Lithuanian Latvian Icelandic Portuguese Portuguese Spanish Spanish Hungarian Slovak Romanian Romanian Slovenian Serbian Serbian Albanian Croatian Bulgarian Macedonian Bosnian Hebrew Arabic Hindi English Indonesian Korean Japanese Thai Malay Vietnamese Chinese Chinese Persian Bengali Pashto
Glogar Umwelttechnik GmbH from St. Florian b. Linz:

Glogar Umwelttechnik GmbH gehört zu den führenden Unternehmen in der Entwicklung von Reinigungssystemen zur Bauteilreinigung im Bereich der industriellen Teilereinigung. Teilereinigungsanlagen bzw. Teilereinigungsmaschinen zur Metallreinigung und Entfettung von Oberflächen, sowie zur Werkstückreinigung und Gebindereinigung.

Neben der klassischen Teilereinigung von Werkstücken und Werkzeugen aus der Metall- und Kunststoffverarbeitung bieten wir auch maßgeschneiderte Reinigungskonzepte zur Vorbehandlung vor dem Lackieren und hochwertigen Beschichtungsprozessen wie PVD/PACVD und DLC, sowie der Wärmebehandlung.

Vom manuellen Waschtisch für den Instandhaltungsbereich, über klassische Teilewaschanlagen - für Bauteile bis zu einer Größe von 2x2 Meter - bis zu großvolumigen zu reinigenden Bauteilen, Reinigungsanlagen für Reparaturbetriebe bis hin zur Mehrkammer Ultraschallreinigungsmaschine finden Sie alle Typen von Reinigungsanlagen in unserem Portfolio. In unserem Technikum führen wir für Sie bzw. gerne auch mit Ihnen gemeinsam Probewaschungen in Teilewaschmaschinen, Spritzreinigungsanlagen, Tauchreinigungsanlagen, Ultraschallreinigungsanlagen durch.

Teilereinigungsanlagen für wasserbasierende Reiniger als auch mit modifiziertem Alkohol stehen für Versuchswäschen zur Verfügung. Um den immer höheren Anforderungen an die Bauteilsauberkeit (nach VDA 19) im Bereich Restschmutz und Oberflächenspannung gerecht zu werden, wurden in den letzten Jahren viele innovative Lösungen im Bereich Feinstreinigungsanlagen und Präzisionsreinigungsanlagen umgesetzt.

Wir konzipieren wirtschaftliche, hochwertige und umweltfreundliche Reinigungschemie auf wässriger Basis und auf Basis von Lösemittel (modifizierter Alkohol, Dowclene 1601). VOC-freie Reiniger, Teilereinigungsprodukte zum Reinigen, Entfetten und Entrosten, sowie Korrosionsschutzprodukte und Schweißtrennmittel runden unser Reiniger Sortiment ab. Da wir uns als Systemlieferant für die Industrie sehen, finden Sie auch Reinigungspapier, Reinigungstücher, Ölbindemittel, Sprühgeräte und Dosiersysteme in unserem Lieferprogramm.

Herr Peter Zeinhofer
Tagerbachstraße 10
4490 St. Florian b. Linz
Austria
Oberösterreich


further legal information

GLOGAR UMWELTTECHNIK GMBH
Tagerbachstraße 10
AT-4490 St. Florian
Geschäftsführung: Herr Peter Zeinhofer / Frau Elisabeth Vatier
Firmengericht: Landesgericht Steyr
Firmenbuch-Nr.: FN 182072d
Behörde gem. ECG: BH Linz-Land
UID Nummer: ATU46863103

This dealer has been successfully verified and was awarded the Machineseeker Trust Seal.

What is the Trust Seal?

The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.

Trust seal
Current classifieds & top offers:
metall part washer
metall part washer Glogar / Magido L102

Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 sta ...

metal parts washer, camber
metal parts washer, camber Glogar L160E

Spray Cleaning Plant - Parts Washing Plant - NEW SYSTEM / pilot plant Basket useful dimensions: LxW 1.100 x 1.100 mm 3k8wszi3b net height: 8 ...

spray flood cleaning machine
spray flood cleaning machine Glogar RH600V

Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be ...

Send inquiry to Glogar Umwelttechnik GmbH:
More classifieds & machinery offers:
metall part washer Glogar / Magido L102

Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara)......


metal parts washer, camber Glogar L160E

Spray Cleaning Plant - Parts Washing Plant - NEW SYSTEM / pilot plant Basket useful dimensions: LxW 1.100 x 1.100 mm 3k8wszi3b net height: 800 mm max. loading weight: 700 kg tank v......


spray flood cleaning machine Glogar RH600V

Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be carried out by spraying, flooding (injec......


parts washer, spray washing machine Glogar CM 13 - 2 Tank

Parts cleaning system / spray cleaning system type CM13, 2-tank (washing + rinsing) including hot air drying; Bblla8goni Chamber and tanks made of stainless steel 1.4301; Basket (d......


hot washing spray machine Glogar / Magido L102

Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing p......


ultrasonic metal part washer Glogar GL90-DIS

Ultrasonic washing machine- ultrasonic cleaning device with attached oil separator and insulated hinged cover Floor ultrasound, frequency: 25 kHz Power (eff./peak): 750 / 1,500 wat......


ultrasonic parts washing unit Elma E 120H

Ultrasonic cleaning unit, ultrasonic table unit E 120H including heating and switchable pulse mode inner tank dimensions: 276 x 216 x 199h mm Basket dimensions: 250 x 190 x 115h mm......


Washer - top-loaders Glogar L90

Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara)......


metal part spray washer Magido / Glogar L90

Parts cleaning machine - spray cleaning system type L90 automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washing pump (Fa. Low......


Spritz flood cleaning system Viverk Flow-Jet VKT-R-23

Spray-flood cleaning system, 2-tank system (washing + rinsing), blowing off and subsequent drying. Parts can be cleaned, rinsed and dried while the basket is standing, pivoting or ......


high pressure washing part cleaner Glogar HP25

HD washbasin - HD brush washbasin Washstand has an adjustable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is done by means of aqueo......


basket for metal cleaning Glogar

Small parts basket, washing basket for parts cleaning Material: stainless steel 1.4301, additionally el.-polished dimensions: LxWxH 400x200x170(h) mm mesh size: 6x6 mm including li......


spray washing machine for metal parts Glogar L160 KL

Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight:......


Parts washer - cleaning system Glogar L90

Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara)......


Combination spray cleaning system Glogar L101 HP

Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washi......


ultrasonic parts washing unit Glogar Ultrasonic 1600H

Ultrasonic cleaning device Glogar Ultrasonic 1600H Tank capacity max.: 162 litres Basket dimensions (usable): 480 x 525 x 300h mm Inner tank dimensions: 600 x 600 x 450h mm Outer d......


Cleaning system - Top loader Glogar TR450

Parts cleaning machine / spray cleaning system type TR450 The spray cleaning machine type TR450 is an automatic cleaning and degreasing machine with a cover that can be easily open......


ultrasonic washing machine Glogar ULTRA 1100

Ultrasonic cleaning system, ultrasonic washing system including automatic pneum. Fabric lift; max. loading weight: 250kg useful dimensions: platform: 1.100x500 mm, useful height: 4......


ultrasonic parts washing unit Glogar Ultrasonic 600H

Ultrasonic cleaning device Glogar Ultrasonic 600H Tank capacity max.: 58 litres Basket dimensions (usable): 400 x 255 x 220h mm Chpfh3x0 Internal tank dimensions: 500 x 330 x 350h ......


solvent metal washing machine IFP/Glogar KP100 HMA

Fully automatic solvent cleaning system KP100 HMA for operation with solvents (hydrocarbon or mod. alcohol) under full vacuum. The cleaning and drying process runs fully automatica......


parts washing machine for metal parts Magido / Glogar L901FP

These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models......


parts washing machine for metal parts Magido / Glogar L800FP

These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models......


Spray cleaning system - Toploader Glogar L122

Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by means of gear motor, housing of the plant made ......


spray washing machine for metal parts RH S 470

The spray cleaning system "RH S" is a compact, space-saving, automatically operating cleaning system, which meets high demands regarding cleaning/degreasing and drying results. The......


Hybrid parts cleaning system (4-tank) IFP/Glogar KP 50 Hybrid - Lösemittel + wässrig

Fully automatic hybrid cleaning system "KP50 Hybrid" for operation with solvents (hydrocarbon or mod. alcohol) and aqueous media under full vacuum. By combining both technologies/m......


43 anzeigen
Machineseeker.com is official sponsor of:
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out