Used Coordinate measuring machines for sale (332)

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Equipment: type plate available, Mitutoyo Crysta Apex S544 coordinate measuring machine Multi-sensor cabling (analog scanning) Temperature compensation for all axes X-axis measuring range = 500 mm Y-axis measuring range = 400 mm Z-axis measuring range = 400 mm Measurement uncertainty = 1.7 + 3L/1000 (µm) Mitutoyo UC400 controller Renishaw PH6M probe head Renishaw SP25M sensor Renishaw SM25-2 module (scanning) MCosmos-3 v.3.5 measurement software Ceb Et Daevvlrljlerb WIN10 PC system and 27" monitor Reference sphere / calibration sphere Adapter clamping plate Optional software upgrade Optional hardware upgrade Full service available upon request

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Creb Et Djt T Uavjaljb

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 5,000 mm, measuring range Z-axis: 1,500 mm, Wenzel LH 20.50.15 Premium Accuracy The measuring machine has a measuring range of 2,000 x 5,000 mm. The 5,000 mm longitudinal axis is free from the front and rear, allowing longer parts to be placed on the measuring machine. The area between the columns is approximately 2,300 mm. Vertically, 1,500 mm can be measured. Maximum workpiece weight: 8,600 kg Dimensions: 6,500 x 2,800 x 5,200 mm Weights: 30 t. SCOPE OF DELIVERY / OPTIONS: Premium Accuracy P-050761-1 Length Measurement Error According to DIN EN ISO 10360-2 SP25 plus PH10M Touch Probe (Position 10) MPEe [μm] 3.0+L/350 MPEp [μm] 3.0 MPEthp [μm] 3.6 • Active Damping Device • Surcharge for HT 400 RC • Quartis X 3M/25 Equipment Package Crob Etjwb H Aze Dalob • Data Processing System • Metrosoft Quartis GEO Basic Package • Metrosoft Quartis -IPH • Metrosoft Quartis Scan • Metrosoft Quartis Curve • Metrosoft Quartis Surf • Metrosoft Quartis Impex Elem • Renishaw PH10M 3D Touch Probe • Renishaw Probe Element SP25 • 20-piece probe extension set • Reference sphere D=25 with ceramic and certificate • FCR25 probe change system • Quartis offline programming station

Condition: used, Year of construction: 1997, x-travel 1500 mm y-travel 800 mm z-travel 600 mm weight of the machine ca. 2,7 t dimensions of the machine ca. 2,66 x 1,60 x 3,10 m Installation and calibration of the machine can be supplied by the manufacturer MDM at site of installation at extra costs. CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Crob Et Dod Il A Rsaljb Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. Crsbovitkis Et Dalob - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. can be determined. - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: excellent (used), Year of construction: 2006, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, MEASURING MACHINE Mitutoyo Crysta Apex C Measuring range: 700x700x600mm Probe Head: Renishaw PH10MQ Sensor: TP20 Tool changer: MCR20 - optional Controller: Mitutoyo UC200H Software: MCosmos also available with Calypso by Zeiss or CMM Manager by QXSoft with additional price; Manufactured in: 2006 Warranty: terms to be agreed General Description: Crob Et Daspa Ud Ajlsb The machine fully functional and in excellent aesthetic condition.

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo Crysta Apex S574 coordinate measuring machine Multi-sensor cabling (analog scanning) Temperature compensation for all axes X-axis measuring range = 500 mm Y-axis measuring range = 700 mm Cjb Etsvyq Efj Dalerb Z-axis measuring range = 400 mm Measurement uncertainty = 1.7 + 3L/1000 (µm) Mitutoyo UC400 control system Renishaw PH10M probe head Renishaw FCR25, 3 pieces Renishaw SP25M sensor Renishaw SM25-1 and SM25-2 modules (scanning modules) MCosmos-3 v.3.5 measurement software WIN10 PC system Reference sphere / calibration sphere Optional software upgrade Optional hardware upgrade Full service available upon request

Condition: excellent (used), Year of construction: 2016, Travels X / Y / Z 300 / 200 / 200 mm Maximum table load 16 kg Crsbot E Hd Rj Et Daljb The machine has been regularly serviced. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, Functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Crsb Eteglp Nqs Daleb Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2024 Includes PC and Software Illustrative Image by the Manufacturer

Condition: ready for operation (used), Year of construction: 2000, A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Crjb Et Djwd S Unoaljb

Condition: refurbished (used), Year of construction: 2018, Are you measuring your large parts in house ? We make it affordable with this second hand machine Detailed dimensional inspection and quality control, especially for complex geometries and medium to large sized parts 3D Coordinate Measuring Machine - The XL Class - Large and Precise DEA Delta 4509 Rebuilt by DEA in 2018 CNC controlled Traverses - Measuring range: X 6350 mm Creb Etov Uz Dho Daleb Y 2540 mm Z 1830 mm Excellent condition Proposal Number V-7030 Your benefits are: High Precision Detailed Dimensional Inspection Complex Geometry Inspection Multi-Axis Measurement Automated Inspection Streamlined manufacturing Process Reduced Production Time Reduced Waste

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 16 kg, warranty duration: 3 months, total height: 1,500 mm, type of input current: AC, total width: 800 mm, total length: 850 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 77 kg, input voltage: 230 V, year of last overhaul: 2023, ambient temperature (max.): 30 °C, Equipment: documentation/manual, type plate available, CNC-controlled measuring machine for automatic, optical-tactile measurements with camera and 3D with probe. Interchangeable bench and 2 SF modules are included. PC-DMIS CAD V13 with Step/Dxf programming possible. Crob Esq T R Rhot Daleb

Condition: reconditioned (used), Year of construction: 2008, machine/vehicle number: FARO-PT08, Faro Fusion Arm in top conditionArm 7 axis, length 6ft (appx. 1,8m) Accuracy 36/51µm Last calibration 2011 incl. very new Aberlink 3D software (free updates) Creb Et Daspqx Ifelsb Windows 10 PC or notebook (used) on demand Inca Premium software (+ € 4.000,--) or other application (Polywork, PcDmis, MComos.) On demand we can deliver a granit plate with 1500x1000mm. Softwaretraining possible

Condition: used, Year of construction: 2001, Measuring range x/y/z = 700/1000/600 mm - Zeiss Calypso 2017 software / Service Pack 2 / QS-STAT interface 1.97 Ceb Etev S Ulge Dalorb - Carl Zeiss BP26 SE Standard control panel - 2013 - Zeiss VAST XT measuring head with touch probe - 5-position rack without various touch probes - Last calibration 11/2022

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Crjb Et Daed Ambtslob Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: ready for operation (used), Year of construction: 2005, Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible. Creb Eott Sgmjt Daleb

Condition: excellent (used), Year of construction: 2015, Are you measuring your large parts in house ? We make it affordable with this second hand machine Detailed dimensional inspection and quality control, especially for complex geometries and medium to large sized parts 3D Coordinate Measuring Machine - The XL Class - Large and Precise Hexagon DEA Delta Slant Performance SL 305130 Manufactured new in 2015 CNC controlled Traverses - Measuring range: X 3000 mm Y 5100 mm Z 3000 mm Excellent condition Proposal Number V-7042 Crjbsv Uzzao Et Dalob Your benefits are: High Precision Detailed Dimensional Inspection Complex Geometry Inspection Multi-Axis Measurement Automated Inspection Streamlined manufacturing Process Reduced Production Time Reduced Waste

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Cjbju E U Hbe Et Dalsrb Granite bed size: 1330x963.5x170mm

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 175 mm, Multisensor measuring machine CNC with camera and through incident light and Renishaw probe with interchangeable bench. Machine is under power and can be inspected. Dimensions LWD 1000x1000x1800mm. 540 KG Windows 10 with PC and current measuring software InSpec 2.97.10 Accuracy XY 2.6+L/175 Z 3.0+L/100 Cob Ejpit Nwot Daljrb Measuring range: XYZ 300x300x175mm

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm DC motores with encoders Guideways linear guides Probe Renishaw PH10MQ with PHC10-2 plus (used) Creb Etsh Nu Uhj Daljb Probe Renishaw TP7 optional with ACR-3 (used) Computer Workstation WIN 10 (used) or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, Functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Ceb Etswcxb Se Dalorb Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: like new (used), Year of construction: 2012, Functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, Optiv Classic 321 GL reconditioned machine Optical measuring machine. Measure precisely in the micrometer range... Technical data: Measuring range (X/Y/Z) 300 x 200 x 150 mm Measurement uncertainty (X/Y) 2.0 + L/250 µm Measurement uncertainty (X/Y) 2.5 + L/250 µm Measurement uncertainty (Z) at max. zoom 2.9 + L/200 µm Visible magnification with zoom lens 20x to 160x Measuring table with precision guides, max. table load 16 kg Device base natural hard stone Total weight 170 kg Dimensions (W*D*H) 705*995*883 mm Year of manufacture 2012 - LED ring light with 4*90 degree sections, separately controllable via software - High-performance PC with Windows 10 Pro, keyboard, mouse and TFT screen - Measuring and Evaluation software PC-DMIS Pro Version 2017 - Wide angle 0.7 x attachment lens for screwing on (increases the field of view) Stable workbench recommended for the machine. A desk for the PC screen/keyboard/mouse is required. This is not included in delivery. The machine is in like new condition and can be inspected! Was used very rarely by the previous customer. Crjb Et Djhufk Eealjb

Condition: refurbished (used), Year of construction: 2004, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 600 mm, Mitutoyo CMM Crysta Apex C9206 Measuring ranges 900x2000x600mm Accuracy 1,7 + 3L/1000µm Slightly damaged V-Axis covers (will be replaced or delivered without) Software MCOSMOS-1 V3.5, Windows 10 PC or selectable upgrade to: - Mitutoyo MCOSMOS 4.2 incl Geopak & MCAT1000S or new license - EasyCMM I++ Server plus Inca Professional Probe Renishaw PH10MQ with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Scanning Probe Renishaw SP25 - Probe Change Racks - New PH10MQ+ Head and Probe (upgrade) - MCOSMOS Offline license MCAT1000P - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration (plus additional travel expenses) Including 3 Month Warranty (excl. travel expenses) Crjbef S Tmve Et Daleb

Condition: used, Year of construction: 2008, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Visio 500 optical/tactile 3D measuring machine 453 (400 X, 500 Y, 300 Z) travel range. Measurement software: PC-DMIS CAD version 2015 Creboiyymrs Et Daljb 6-station probe changer rack with a total of 2 TESASTAR MP modules Silent PC Big Tower with Windows (everything installed so it works) Camera with 200x optical zoom with incident light as a ring light/coaxial light and transmitted light (diascopic). Everything is fully functional. The Y-axis has slight scratches. It has been sanded down. This does not affect function or accuracy.

Condition: ready for operation (used), Year of construction: 1992, Measuring Range X – axis 700 mm Cjb Et Daogvg I Eslsrb Y – axis 1000 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1, option PH9 or PH10M Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5