Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Gbodpfxoz Ix Uqj Al Uou Machine operating hours: 18703 h / 4738 h

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 25787, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,900 h, Equipment: chip conveyor, documentation/manual, Hermle C 400 U – 5-Axis Machining Center Year: 2017 Control: Heidenhain TNC 640 Condition: Very good Machine ON: 18,512 h Program: 9,268 h Spindle ON: 6,900 h Drive ON: 18,514 h Axes in motion: 7,147 h Technical specifications: X/Y/Z travel: 850 / 700 / 500 mm A-axis: 25 rpm C-axis: 30 rpm Spindle speed: up to 18,000 rpm Power: 20 kW Torque: 173 Nm Tool holder: HSK 63 Tool magazine: 38 + 50 positions Gbsdpfoz H Agbex Al Usu NC swivel rotary table: Ø 650 mm Swivel range: +91° to −139° Equipment: Heidenhain touch probe BLUM tool measurement Electronic handwheel Chip conveyor Oil mist extraction Inspection possible by appointment.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, -Travel ranges: X-axis: 800mm Y-axis: 800mm Z-axis: 600mm -A-axis swivel range (2 torque motors): +/- 140° -Swivel axis A speed: Max. 50 min-1 -C-axis rotary range (1 torque motor): 360° (continuous) -Rotary table speed: Max. 100 min-1 -Table load: Max. 1000kg -Path control: Heidenhain TNC 640 -Tool holder: HSK-A63 -Spindle speed range, stepless: Max. 18,000 min-1 -Rapid traverse speed: Max. 60m/min -Additional tool magazine: 224 tool positions -Main magazine: 11 tool positions -Max. tool length in changer: 400mm -Max. tool diameter in changer: 130mm -Chip flushing hose -Chip conveyor flushing -Emulsion mist extraction system -Chip conveyor Godpfx Aljz Iy Swo Uebu -Protective guard automatic: 840mm opening width -Compressed air supply: Min. 6 bar -Stand-alone cooling unit -Remote maintenance -Machine weight: 15,500 kg -Tool measurement: Blum Laser -3D machine model -IKZ water cooling: Max. 80 bar -Coolant tank volume: 1100 liters The image is an example.

Condition: good (used), functionality: fully functional, FP1 Milling Machine – Fully functional with extensive accessories For sale is an FP1 milling machine, fully functional and with a wide range of accessories. The accessories include, among other things: Gbedpfx Aez Ingiel Ueu Tool cabinet Dividing head Vise/Vises Various collets Various tools and other accessories The machine is sold including the accessories shown in the pictures or that are available. Condition: used, fully functional Inspection: possible by arrangement. Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2017, Control DMG MORI SLIMline x-travel 500 mm y-travel 450 mm z-travel 400 mm b-axis -5 / + 110 ° 360 ° table dimensions 630 x 500 mm rapid traverse 30 m/min turning speed range 20 - 12.000 U/min Drive power (40/100%) 13/9 kW tool taper SK 40 number of tool places 30 Pos. Number of working hours ca. 11.605 h spindle hours ca. 4.061 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply (ICS) - Coolant spray gun - Electronic handwheel - Direct position measuring system (X, Y, Z) - Renishaw probe kit - Oil and emulsion mist separator Gedpfjz I D Amsx Al Usbu Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L Gbedpfxjz Nmigj Al Uou • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2021, MAXXMILL 630 5-AXIS UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Axis Universal Machining Center with Gedoz Nddaepfx Al Usbu integrated tool magazine, 30 positions. Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o emcoNNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: HSK-63A Travel: X = 500 + 50 mm, Y = 460 mm, Z = 450 mm Distance spindle nose – table: 150 – 650 mm Rapid traverse X-Y-Z: 30 m/min B-, C: 16, 25 RPM Table: driven by worm gear, cast iron table ground with T-slots Number – Width – Pitch: 5 – 14 – 75 Clamping area: 630 x 500 mm Maximum table load: 200 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 3.9 s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blast device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 200 liters o Leveling elements (4 pieces) o Direct measuring system B-axis Year of construction: 2021 M-006.062.21 incl. EMCO MILL-ASSIST and various accessories

Condition: used, Year of construction: 2003, operating hours: 67,400 h, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools Gbjdpfozvf Naex Al Usu - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Godpez Eby Rsfx Al Ujbu Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 24, number of axes: 6, This 6-axis SAMAG TFZ 2L-1000 was manufactured in 2019. It features a travel extension of 1,600 mm in the X-axis, 1,250 mm in the Y-axis, and 1,100 mm in the Z-axis. The machine is equipped with a reinforced main spindle drive of 15/23 kW and a tool changer with 24 positions. If you are looking to get high-quality deep hole drilling and milling capabilities, consider the SAMAG TFZ 2L-1000 universal machining centre we have for sale. Contact us for further details. - Number of Axes: 6 Axes (Linear X, Y, Z, W axes; A-swivel axis +/- 30°; B-rotary table axis 360°)- Travel Extension Y-axis: 1,250 mm- Main Spindle Drive: Reinforced 15/23 kW (for standard spindle 6,000 rpm)- Drilling Diameter Range: Ø 4 - 36 mm- Tool Changer: 24 positions for HSK-A 63 spindle with cover- Cooling Medium: Emulsion execution with enclosed roof and extraction unit- Measuring System: Direct measuring system in all main axes- Probing Systems: Heidenhain TS 460 touch probe, Heidenhain TT 460 3D infrared touch system, and Ø 25 mm calibration ball- Monitoring & Kinematics: Safety query chip cartridge, collision monitoring with 3D acceleration sensor, DCM (Dynamic Collision Monitoring), and QCK (Quick Check Kinematics) Gbedpfxez Nhx Nj Al Uju Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: chip conveyor, documentation/manual, DMG MORI Machining Center 5-Axis Simultaneous Type: DMU 95 MonoBlock Gbedszxpt Uopfx Al Uou Year: 2016

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65, including standby magazine Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 80 Travel distances: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Rotary-swivel table: Ø 650 x 540 mm Gedpfez Ix Uwox Al Usbu Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 positions Spindle speed: 50 - 14,000 rpm Accessories Standby magazine with 180 spaces Incline bed coolant system SKM 900 Chip conveyor LTA extraction system 3D measuring probe Coolant gun KinematicOpt

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: X: 1520 Y: 520 Z: 420 C: 360 degrees B: -5 degrees (-90 degrees) +115 degrees Equipment: Siemens 840D control with ShopMill Chip conveyor Blum tool measurement system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle, SK40 Tool changer Swinging operation, 3-axis - 5-axis machining Compressed air for the spindle Enclosed work area Gedpfsz Hcahjx Al Usbu Clamping surface 3-axis table: 920 x 540 mm Tilting round table: 650 mm diameter Accessories: Various tool holders, SK40 Machine feet 3D measuring probe Tool measurement system Machine is available immediately! We will handle the loading of the machine! Transport can be organized upon request.

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Gbedpfxjzzknxs Al Uju Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random Gbodsyf Ncqepfx Al Uou ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: good (used), Year of construction: 2011, functionality: fully functional, controller manufacturer: Heidenhain, overall weight: 8,400 kg, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Wemas VZG 65A Year of manufacture: 2011 Heidenhain iTNC 530 control system 30-position tool changer, SK40 Coolant system with strip-type filter Chip conveyor Gbjdpfx Alez Hx N Sj Uju

Condition: excellent (used), Year of construction: 2022, operating hours: 52 h, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, Do ekonomicznej i wydajnej obróbki profili z aluminium, tworzywa sztucznego i cienkościennych profili stalowych Wszystkie procesy obróbcze jak frezowanie, wiercenie i gwintowanie odbywają się na nieruchomym profilu, dzięki czemu powierzchnia profilu jest chroniona Lepsze wyniki pracy dzięki zastosowaniu inteligentnej techniki sterowania Szybkie pozycjonowanie zespołu obróbczego z prędkością sięgającą 60 m/min dzięki zastosowaniu dynamicznych serwonapędów Gwintowanie bez uchwytu kompensacyjnego Automatyczne rozpoznawanie zacisków i pozycjonowanie Automatyczny magazyn narzędzi z czterema półkami na narzędzia (bez narzędzi) Nowoczesne, 3-osiowe sterowanie Ergonomiczna praca dzięki zastosowaniu nowoczesnego łoża pochyłego Brak konieczności wykonywania ruchu referencyjnego osi dzięki zastosowaniu systemów opartych na enkoderach absolutnych Unikanie kolizji dzięki automatycznemu rozpoznawaniu zacisków i pozycjonowaniu Silnik frezarki Power-Torque z zamkniętym układem regulacji obrotów zapewnia krótki czas rozruchu i wyhamowania wrzeciona Certyfikowana, zintegrowane z napędem funkcje bezpieczeństwa Niskie zużycie prądu dzięki zastosowaniu inteligentnej techniki sterowania Większa efektywność energetyczna dzięki połączeniu napędów osi pomiędzy obwodami Awaryjne zasilanie elektryczne (UPS) Gsdpfx Aowgmyqol Uebu System operacyjny Windows Panel PC 15,6", procesor i3, przyłącza USB oraz złącze sieciowe Łatwe i wygodne wprowadzanie programów za pomocą eluCam na panelu operatora również w czasie obróbki Zdalna konserwacja online Wyposażenie maszyny Chłodzone powietrzem wrzeciono frezu 8 kW, S1 Kabina do ochrony operatora Cztery poziome dociski pneumatyczne do mocowania materiału Ogranicznik materiału, po lewej stronie Uchwyt narzędzi HSK-F63 Smarowanie ilością minimalną Wysokowydajny płyn chłodzący Ręczny pulpit sterowniczy Szablon głębokości Opcje Narzędzia Uchwyty narzędzi Automatyczny magazyn narzędzi do maks. czterech narzędzi standardowych Automatyczny magazyn narzędzi do głowicy kątowej Obrotowa głowica kątowa HSK-F63 na dwa narzędzia Urządzenie chłodzące Green-line do szafy sterowniczej z obniżonym zużyciem energii Czytnik kodów kreskowych Kabina ochronna, opcjonalnie z zamknięciem dookoła Standardowo cztery zaciski. Możliwe jest rozszerzenie do ośmiu zacisków Prawy referencyjny ogranicznik materiału do przykładania elementów z obróbką nadmiarowych długości Dodatkowy ogranicznik do obróbki nadmiarowych długości po lewej stronie Obustronny pomiar długości Zacisk podwójny oraz dodatkowe akcesoria po złożeniu zapytania Panel PC 18,5", procesor i5 Panel PC 21,6", procesor i7 Uchwyt na notatki Osłona dźwiękochłonna Utylizacja wiórów z wykorzystaniem wanien na wióry

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. Gbjdpsvx N Shofx Al Ueu The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, Year of construction: 2011, A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement. Gjdpfx Aloz Irmto Uebu

Condition: used, Year of construction: 2008, Control HEIDENHAIN iTNC 530 Gsdpfx Aez N Hxzsl Ujbu x-travel 1.850 mm y-travel 1.400 mm z-travel 900 mm c-axis 360 ° b-axis -20 / +120 ° Condition: Used Technical features & accessories: - Cooling unit BURN RW12000-N15 - Chip conveyor BMF KFE63/50-275Z60 - Belt filtration system - Coolant system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: OI-MC, table width: 700 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, spindle nose: DIN 40 ISO, number of slots in tool magazine: 24, CNC FANUC – OI-MC TABLE Table dimensions: 1400 x 700 mm T-slot dimensions / pitch: 5-18 x 125 mm Maximum allowable weight: 1000 kg CAPABILITIES: X-axis longitudinal travel: 1200 mm Y-axis transverse travel: 700 mm Gbedpsz H Npcefx Al Ueu Z-axis vertical travel: 700 mm SPINDLE: Spindle mount: DIN40 ISO Rotational speed: 10,000 rpm Motor power: 11/15 kW FEEDS: Rapid traverse rate for X, Y, Z axes: 24000 mm/min Complete with: - Rotating table, 4th axis, with LCM HP250 tailstock - 24-position RANDOM-type tool magazine - Variety of collets - Remote electronic handwheel Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Godpfx Alez An S Rj Uobu Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: ready for operation (used), Year of construction: 2005, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm Gbodpfxsz I Rfhs Al Uou z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included:* Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm* Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD)* External Coolant Supply: 4 bar / 40 l/min* Washdown Pistol with pump (2 bar / 10 l/min)* Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring:* Infrared Measuring Probe: Heidenhain TS 649 (HSK-A63)* 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Through-spindle Coolant Yes Gjdpfx Aezdzmwel Uobu Taper Size HSK 63

Condition: good (used), Year of construction: 2011, functionality: fully functional, 5-axis machining center Hedelius RS 805 K Control system: Heidenhain iTNC 530 Year of manufacture: 2011 Internal machine number: 78 Travel ranges: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Gjdpfx Ajz Iw Tfel Ujbu Accessories: - Inclined bed coolant system SKM 900 - Internal coolant system 25 bar - Chip conveyor - Operating panel - Air blow guns - Flushing guns