Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) Available at the end of November 2025 Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder Dcodpexb U Ayofx Ah Ujp S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: used, Year of construction: 2008, functionality: fully functional, Used SHINOHARA 74-4 Offset Press | Year 2008 | 4 Colors | B2 Manufacturer: SHINOHARA Model: 74-4 Year of Manufacturing: 2008 Configuration: 4 Colors Max Sheet Size: 520×740 mm (B2) Max Mechanical Speed: 13,000 sheets/hour Condition: Very Good, still in production (Can be inspected under power). Technical Features and Automation: ● Dampening: Alcohol Dampening System ● Cooling/Circulation: Baldwin System ● Inking Control: Remote Ink Key and Register Control Console ● Plate Change: Semi-Automatic Plate Loader ● Washing: Automatic Blanket and Ink Roller Wash-up Devices Dsdoxm S Sijpfx Ah Uecp ● Drying: IR NIKOR Dryer ● Feeder: Ionizer at Feeder, Electronic & Mechanical Double Sheet Control ● Delivery: Non-stop delivery ● Substrate Thickness: 0.04 to 0.6 mm ● Pre-press Connectivity: CIP 3 Ready

Condition: used, functionality: fully functional, machine/vehicle number: 358773, Heidelberg Kors 1 color Dcodpfxsxnl Ias Ah Usp All functions are operational on the machine Wischeres dampening system Please make an offer!

Year of construction: 2002, condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001 Dcedpfsd Nd T Usx Ah Usp

Condition: good (used), Year of construction: 1984, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 51510274, type of input current: three-phase, input current: 7 A, input voltage: 380 V, Equipment: documentation/manual, Machinenumber 51510274 Year of built 1984-85 Good condition, normal light-soiling Molleton dampening 2 mounting rings in NP unit NO numbering blocks included (zeiser equal to GTO, Fuji etc) Under power in our warehouse. To be delivered EXW van Rooij, loaded on your transport (LOT) Dodpst Etitjfx Ah Uecp Technical Data • Maximum sheet size: 381 × 520 mm • Minimum sheet size: 110 × 148 mm • Maximum printing area: 370 × 515 mm • Maximum printing speed: 10,000 iph • Minimum printing speed: 3,000 iph • Feeder capacity: 940 mm • Delivery capacity: 420 mm • Stock range: 30 up to 350 g/m² • Maximum paper thickness: 0.4 mm Printing plate dimensions: 0.15 × 521 × 420 mm Blanket dimensions: 1.9 × 524 × 480 mm • Press drive motor — power: 1.5 kW • Air pump motor — power: 1.5 kW • Electric motor delivery raising: 370 W • Inching: 120 W Machine dimensions • Length: 2,200 mm • Width: 1,185 mm • Height: 1,570 mm • Machine weight: 1,550 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, color channels: 8, paper width (max.): 74 mm, paper height (max.): 53 mm, Heidelberg SM 74-8 P | 2003 | 8-Color Offset Press (4/4 Perfector) A well-maintained 8-color Heidelberg offset press, ideal for high-quality commercial print production. The press features a 4/4 perfecting system and comes fully equipped with automation and temperature control for consistent, efficient operation. Main specifications: Year of manufacture: 2003 Printing units: 8 colors Sheet size (max.): 740 × 530 mm (29 × 20 in) Sheet size (min. – straight mode): 210 × 280 mm Sheet size (min. – perfecting mode): 300 × 280 mm Maximum print area: 510 × 740 mm Paper thickness range: 0.03 – 0.6 mm Impression counter: 230 million Equipment & Features: CP2000 control console with touch-screen operation Autoplate automatic plate changing Dcedpfjxnmfajx Ah Uep Alcolor Vario dampening with integrated circulation and cooling Ink temperature control (air-cooled) Blanket and roller washing systems Chromed blanket cylinders with PerfectJacket protection Technotrans refrigeration and recirculation system IR dryer unit Eltex antistatic equipment High-pile delivery system Full perfecting 4/4 capability Location: Eastern Europe Availability: October 2025 Price: On request

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Technical data and description: see pictures Dcedpfxjh Eii To Ah Uep

Condition: used, 4 ink trays with 22-channel control from Microcolor I unit remotely (off-press controls) Dcedpfx Ahjv Nzrns Uep

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, color channels: 4, paper width (max.): 74 mm, paper height (max.): 53 mm, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Current State: In production Colors: 4 Impress.Count: 68 mio Extras: | Perfector | Touch-screen Control | Autosize Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Extras: - Perfector - Digital Controls - Autosize Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production Located: Europe Eastern Dcsdpfxjxnl E Sj Ah Usp Available: Immediately Price: On Request Important: Very good condition Located: Europe Eastern Current State: In production Available: 10-2025 Price: On Request

Condition: excellent (used), Format (cm): 32x52 Dodpfoh Eik Hjx Ah Ujcp All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine Dcsdov Nzq Rspfx Ah Uep The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete.

Condition: excellent (used), Format (cm): 32x46 All existing tools will be included with the device Dcedpoh Eikmsfx Ah Ujp for punching and perforating as well as holders of these tools (see pictures)

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Dsdpfjv Nwgnox Ah Uscp Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 664937N, Counter (m): 42 Format (cm): 32x46 Dampening: Varn Kompac III Dedpfxsgfb E Ro Ah Ujcp Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Dcjdsv Nv Taspfx Ah Usp Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Format (cm): 36x52 Dampening: Stenz-Dampening-System Dcjdpfx Ahovcxxxs Usp

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 6F070, total length: 1,800 mm, total width: 1,150 mm, total height: 1,600 mm, type of input current: three-phase, input voltage: 200 V, power: 3 kW (4.08 HP), overall weight: 1,400 kg, Equipment: documentation/manual, 1978 very original in excellent condition one color offset machine from the Japanese Sakurai with never used Number Perforating and Impression unit (sprayed in tectyl and deliberately not cleaned by us) is really for that time, compared to other makes incl Heideleberg's GTO46 a top class machine. Very nice and solid machine. Paper size 32 x 49 cm working with the same size plates as at that time the Rotaprint broadened models as well as Romayor and Fuji 50. The condition is so fine that it would almost be allowed in the reception room of the manufacturer. All documentation is included, electrical schematics are complete with legend and parts book belongs to this machine. Dcedjuga U Depfx Ah Uep

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Dcjdpfx Ahoivz E Ts Uop Bacher control 5000

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. Dcjdpfx Ahsuf Sy Ae Uep The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Power: 15.000 sheets/hour Dsdpevcxwzofx Ah Uscp Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Dcjdpfx Astyqhqsh Ujp

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use Dedpfx Aeh Icf Ueh Uscp

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. Dedev Nv Svspfx Ah Uocp We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system. Dcsdpfjvw Ai Rex Ah Uop

Condition: good (used), Year of construction: 2013, 4-color "straight" offset machine with layer stack explanation, autoplate, cocking and CIP3 ink bin and remote control Dedpfotyqhksx Ah Uocp