Used other metal processing machinery for sale (540)

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm Hodjym Nf Ispfx Ag Iji ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: excellent (used), Year of manufacture: 2022 Machine type: Sheet metal profiling and punching line Operating mode: Continuous (flying system) Maximum decoiler capacity: 15,000 kg Material feed: from sheet metal coils Straightening unit: Multi-roll straightener Number of punching portals: 5 double punching portals Number of tools: up to 20 small / 10 large tools Round holes: Ø 8 – Ø 22 mm Slotted holes: up to 18 × 80 mm Keyhole slots: Yes Pre-cutter: flying Post-cutter: rotary with hook knives Profiler: 4 forming stations Hjdpfx Ajymampjg Iei Profile width range: 100 – 400 mm Strip centering: automatic Guide modules: SIGMA Maximum profile length: 15 m Outfeed table: roller table, automatic transport Cutting mode: without material stop

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V Hodpfxolvykxo Ag Iji -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: used, Trumpf marking laser vectormark compact VWS 800 WEIGHT 390 kg Year of manufacture 2003 Hsdpjynnz Rsfx Ag Ioi

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Hodpfx Agjym Dbdj Iei Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; Hsdpfx Aevhc Steg Isi MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Year of construction: 2012, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, overall weight: 7,600 kg, spindle motor power: 32,000 W, number of axes: 3, Horizontal transfer machine manufactured in 2012. This PFIFFNER HW 25-12 features a 12-station indexing rotary table and can accommodate up to 18 machining units. With a maximum clamping diameter of Ø 25 mm and a workpiece length of 100 mm, it offers versatile capabilities. Consider the opportunity to buy this PFIFFNER HW 25-12 machine. Contact us for further details. Hodpfx Asyi Efisg Ioi • Number of stations: 12 • Indexing rotary table: 12-station • Indexing time: 0.5 sMachining units • Horizontal machining units: max. 12 • Vertical machining units: max. 6 • Total machining units: max. 18Workpiece and clamping • Clamping system: Collets • Collet type: W 25 • Max. clamping diameter: 25 mm • Max. workpiece length: 100 mmElectrical data • Voltage: 3 × 400 V • Current: 3‑phase AC • Frequency: 50 Hz • Control voltage: 24 VControl system • Machine control base: Siemens SIMATIC S7 • Interfaces: AS‑i, PROFIBUS • Prepared for CNC axes expansion • Optional teleservice for remote diagnosticsCooling and hydraulics • Coolant system capacity: 850 L • Coolant (filled): approx. 800 kg • Hydraulic unit (empty): approx. 250 kg • Hydraulic oil: 150 LWeights (approx.) • Base machine: 3,000 kg • Electrical cabinet: 700 kg • Coolant system (empty): 1,600 kg • Pedestal: 300 kg Additional equipment • Loading magazine (empty): 800 kg

Year of construction: 1964, condition: used, Dust suction hood , mm Motor output 4,1 kW Air consumption für ÖL m³/h Hodpfswizlysx Ag Iei Weight 250 kg Pump - Rotation speed 3000 U/p. Min. Oil - sucking off - car. Special price - without guarantee. Machine dealer with own stock of 1600 m².

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Hedpowp I S Hjfx Ag Isi Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Year of construction: 2026, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection Hedjw Et Ilspfx Ag Ioi - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - afwikkeltoren met 4 afwikkelaars (AG 3000 a) Capaciteit per afroller: 3 ton Hjdexqh Saspfx Ag Ioi armlengte: 1350 mm maximale snelheid: 25 m/min, frequentiegestuurd 2 - bobine-selector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 5 - Schechtl-schaar voor het op lengte snijden met Siemens Touch CNC-besturing 1250 x 2 mm

Year of construction: 1991, condition: used, machine/vehicle number: 5385, comprising: Magazine loader SIEMENS, year of manufacture: 1991, serial no.: 5385, ERSA ERS 503 reflow oven, serial no. 8596-003, rated power 38 kW, PCB conveyor ALL SMT C-100LD-2-L, year of manufacture: 2016, width: approx. 100 cm, weight: 90 kg, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040561, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, pick-and-place machine ASM Siplace D1i, serial no.: C3052-12040560, year of manufacture: 2013, net weight: approx. 2,000 kg, with 28 feeder slots, including magazine trolley, PCB conveyor NUTEK NTM410L-350-1, year of manufacture: 2014, width adjustable, stencil printer (solder paste printer) DEK Horizon 03, serial no.: 282950, year of manufacture: 2004, de-magaziner SIEMENS, serial no.: 5385, year of manufacture: 1991, incl. accessories such as feeders and PCB magazines. Hsdpeyidkuefx Ag Iji

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. Hsdstpwrqepfx Ag Iji The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, year of manufacture 2014, in very well-maintained and fully functional condition. The last service was performed on 13.08.2024. The machine is immediately ready for operation. The eCAB WorkCenter was specifically developed for professional switch cabinet construction and is ideally suited for automated processing of mounting plates, doors, side panels, and other enclosure components. It enables precise drilling, milling, and thread cutting of components made from steel, stainless steel, aluminum, and plastic. CAD-assisted processing is carried out via a CNC controller with high repeat accuracy – ideal for both single-part and series production. Technical Highlights: - CNC machining center specifically for switch cabinet manufacturing - Automated machining of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeat accuracy - User-friendly CNC control / software Hodpfx Agjymw Has Iji Machine Data: Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last service: 13.08.2024 Condition & Service: - Very well maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of Delivery: - eCAB WorkCenter including control system - Accessories / tool holder - Documentation / computer including software

Condition: used, TWO ROLLS BAR STRAIGHTENER PBVR6 Manufacturer: BRONX Capacity - Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Hsdpfx Aeymcn Asg Iji - Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm - Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left Scope of supply - Entry chanel - Duo introduction - Straightener - Exit chanel Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller Hsdpfx Agjymcm Ej Iei 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : - Bar Loading channel - Input pinch-roll Hodpfxjymcmrj Ag Ioi - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: used, BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min Complete line with : Hodpfx Aeymb U Ujg Isi Loading table with chain transfer Entry Roller Way, adjustable Exit Roller Way, adjustable Electric equipment Hydraulic power pack Bar diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic Hodpeymb Uusfx Ag Iei - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: used, High precision tube mill 38x2,7 SEUTHE / EFD / MAIR Technical specifications - Tube OD range: 11 – 38 mm - Wall thickness range: 0.7 – 2.7 mm - Maximum speed: 120 m/min Special features - Strip whashing tunnel: Cleaning tunnel to remove oils and dirt from strip - Cold rolling inline with Vollmer thickness control: Reduction of strip thickness from 0.03mm to 0.3mm - Reinforcement of FP3 for high tensile strength - Individual motorization in sizing stands - Carbide tungsten rolls - Ceramic rolls at welding stand - All contact parts are NON-MARKING SEUTHE / EFD / MAIR HF welded tube line 38x2,7 This premium-quality production line engineered for the manufacture of high-tolerance welded steel tubes with superior surface finish and dimensional accuracy. Designed to meet the most demanding requirements of the automotive, furniture, and high-quality tube manufacturing sectors, this line combines advanced forming technology, inline strip processing, and state-of-the-art automation. This tube mill is specifically developed to deliver exceptional roundness (up to 0.05 mm) and tight dimensional tolerances, producing finished tubes with tensile strength of up to 660 N/mm². The line incorporates a strip washing tunnel to eliminate oils and contaminants, ensuring optimal welding conditions and consistent surface quality. A key feature is the inline cold rolling unit with Vollmer thickness control, allowing precise strip thickness adjustment before forming. This system enables thickness reductions from 0.03 mm up to 0.3 mm, guaranteeing perfect thickness control and enhanced product consistency. Reinforced fin pass stands and individually motorized sizing stands (Siemens electrics, upgraded in 2024) ensure maximum stability, flexibility, and repeatability during production. The forming and welding section is equipped with an EFD Weldac HF welder (2019), carbide tungsten rolls, and ceramic welding rolls, with all contact parts designed to be non-marking, making the line ideal for visible and high-specification tubes. The sizing section and online inspection systems, delivers excellent roundness, and internal diameter tolerances (±0.08 mm). Cutting operations are handled by a MAIR flying cut-off saw (2019) with CNC control and non-marking clamping jaws, enabling optimized cutting cycles and high productivity. The line also includes eddy current testing, demagnetization, defect marking, cleaning, and anti-rust oiling units, ensuring fully controlled quality output. Current status Hsdpfx Agsyl Uhlj Iji Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube OD range: 11 – 38 mm Wall thickness range: 0.7 – 2.7 mm Maximum speed: 120 m/min

Condition: used, High Precision Tube Mill SEUTHE / ABBEY / MAIR RS65 – 76.2 x 3.25 mm High-quality precision HF welded tube mill designed to manufacture tubes with excellent surface quality and tight dimensional tolerances, specifically engineered for demanding applications in automotive, furniture, and high-quality tube production. Technical specifications - Tube mill: High precision - Model: RS65 & MPS150/4/F - Tube OD range: 25 – 76.2 mm - Wall thickness range: 0.7 – 3.25 mm - HF welder: 250 kW - Maximum speed: 100 m/min Special features · Strip washing tunnel: cleaning tunnel to remove oils and dirt from strip · Inline cold rolling with Vollmer thickness control - Perfect thickness control of strip - Strip thickness reduction: 0.03 mm to 0.3 mm · Reinforced forming stands for high tensile strength · 6 sizing-reducing stands · All contact parts are non-marking SEUTHE / ABBEY / MAIR HF welded tube line 76x3,25 mm Consistent tolerances and superior surface finish RS65 line integrates strip washing tunnel and inline cold rolling unit (Carl Wetzel KG) with Vollmer thickness control for precise strip management (0.03–0.3 mm reduction). ABBEY ETNA forming section features motorized breakdown stands, finpass stands, 250 kW HF welder, complete inside scarfing and triple OD scarfing, plus 6-stand sizing with individual motors. Inline Quality Control & Finishing Prüftechnik Eddycheck 610 eddy current testing, demagnetisation, defect marking, anti-rust oiling, and MAIR automatic magnetic packing system ensure production-ready output. High-Speed Cutting Hjdpfoyl Ugbjx Ag Ioi SEUTHE TS90 flying saw with linear OPTRONIC CNC control and non-marking jaws supports production speeds up to 100 m/min. Delivers consistent high-quality tubes with integrated thickness control and comprehensive inline testing—optimized for demanding industrial applications. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube diameter: 25 – 76.2 mm Thickness: 0.7 - 3.25 mm Maximum speed: 100 m/min Coil OD: 2100 mm Coil ID: 1100 mm HF welder: 250 kW Total installed power: Approx. 680 kVA

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Hjdoyma Hvjpfx Ag Ioi Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Hsdpfxjyma Adj Ag Ioi Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk Hodpfx Agjymav Re Ioi 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 Hodpfx Agjymaute Isi with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min