Used other sheet metal working machinery for sale (227)

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg Gbodpfxepr Utls Acmjt

Year of construction: 1990, condition: ready for operation (used), An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible. Gbodpouxdifjfx Acmet

Condition: ready for operation (used), A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible. Gbodpfjzlt Sujx Acmet

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Gbjdpfx Ajxwvptecmot Height: 1640 mm Weight: 4250 kg

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm Gbjdpfx Acolimtcjmjt coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Gbjdpfx Acsyabn Uemst Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Gbsdpfxji El Ucs Acmst

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gedpfx Ajyttv Recmobt

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min Gbodpfsrr Ungox Acmot TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2025, condition: new, WORKING AREA 2500 X 2000MM (POSSIBILITY OF EXTENDING THE WORKING AREA ON THE Y AXIS) Z AXIS 250MM ESA CONTROL WITH CONTROL CABINET Gsdpfx Aopwhgwscmsbt AUTOMATIC HEIGHT SENSOR THC SERVO AC ESA DRIVES SECTIONAL EXTRACTION TABLE HYPERTHERM MAXPRO200A PLASMA SOURCE GAS BURNER

Condition: good (used), Year of construction: 2009, machine/vehicle number: 67894-09, Offer 18204 Gbodpfxjumkafj Acmjt Technical data: - Pole plate length 400 mm - Width 200 mm - Nominal adhesive force 150 N/cm² - Weight 35 kg - Space requirement W 400 x D 200 x H 60 mm

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Gbsdpfxjq Ewi Aj Acmot

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Gjdpfx Acjycwrzsmobt

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Gedpowhp N Dofx Acmobt

Condition: good (used), Manufacturer: unknown Year of manufacture: Gjdpfx Ajygv H Eecmsbt Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Weight: approx. 0.5 t

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Gedpfx Acoy E Twaomebt Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Year of construction: 1971, condition: excellent (used), functionality: fully functional, Roll mill CARL WEZEL BW350 61 HP Under power Godpfsy Sz S Eox Acmjbt

Year of construction: 2020, condition: new, Lot of steel sheets in perfect condition. Total weight: 360T. Gedpsurumaefx Acmobt Delivery on site. List of dimensions on request.

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Gbsdpfxsyzr Hlj Acmet

Condition: good (used), functionality: fully functional, Roll Mill 30 HP for Silver, Copper Godpfx Acey Sz Tvsmobt

Condition: used, ram weight 1000 kg stroke 1000 mm throat 800 mm impact capacity 4200 mkp total power requirement . kW Steam drive The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Gbsdpfx Ajyquf Uecmot We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1996, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Gbodpfx Acsxxzizjmet

Year of construction: 1997, condition: ready for operation (used), A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible. Gbedpfx Acjvnd Snomet

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Gsdpfx Acsrnq T Nemebt reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Year of construction: 1988, condition: good (used), coil weight: 10 t arm length: 1.400 arm Ø: 300 mm coil OD: max. 1.300 mm Gbsdpfx Aslimtvscmst