Year of construction: 2025, Condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Fslq Nedvltyo Dxrepg Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, briquette diameter: 70 mm, BRIQUETTING MACHINE Fpjlq Newg Tpre Dxrsg briquette diameter 70 mm installed power kW 10 hourly production 70-140 kg year of construction 2022 perfectly working

Condition: excellent (used), Functionality: fully functional, Manual press without the need for power 5 hydraulic cylinders 8 cylinder mounting positions Adjustable arm spacing Fpjlq Nevbzf Ss Dxrog Working dimensions: 2300x1560mm

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 Foleyuxkjq N Dxrjpg working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports Fpjlohwwnroq N Dxrog 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: used, HOMAG glued wood press including gluing machine for sale A high-quality and robust HOMAG glued wood press is for sale, including a gluing machine for applying polyurethane glue to the slats. Technical details: ✅ Usable length: 13,000 mm ✅ Usable height: 1,100 mm ✅ Usable width: 160 mm Equipment & special features: 🔹 Solid, heavy construction - very robust and durable 🔹 15 vertical hydraulic cylinders - each with its own manual shut-off valve for individual control Fpolq N Dxjv A Rqyorog Ppsbmiev A Rqysi D Ttor 🔹 Pressure holding option - enables longer pressing times if required 🔹 5 side pneumatic cylinders for additional support and pressure distribution 🔹 Glue machine for polyurethane glue already integrated 📍 Location: Estonia 🔧 Condition: Fully functional 📩 If you are interested or have any further questions, please get in touch!

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. Fslq N Dscnz U Esxrspg All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: excellent (used), Working length 250 cm Height 136 cm Fjlq Njwgky Uo Dxrspg Width 60 cm Pneumatic drives Electric lifting

Condition: excellent (used), Year of construction: 2016, Bagging system for briquetting press/pellet press 10 bags With control, programming of filling Fjlq N Dovuakgoxrepg Manufacturer: Gross Apparatenbau

Condition: excellent (used), Edge press KPP Felq Nsqnutqe Dxrspg With heating bar 2500 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,416 h, Functionality: fully functional, machine/vehicle number: 1601, Equipment: safety light barrier, RUF 600 briquette press used, ready for use Control: Siemens S7 Briquette format: standard Performance (hardwood chips): approx. 8 seconds per piece! Fpelqewfnlxe N Dxreg The machine is in use and can be inspected under operating conditions.

Condition: as good as new (ex-display), Year of construction: 2023, Performance: 150-180 kg/h Folekt Rcmoq N Dxrspg Motor: 11 kW Voltage: 400 V Frequency: 50 Hz Weight: 1.5 t

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg Folqsil Hggs N Dxrspg - immediately available - subject to prior sale

Condition: used, Used machine Used pneumatic frame press from Maweg MNo.: 7004124588 Fpolskwhgcjq N Dxrsg Pressing area: length approx. 3500 mm / height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach

Condition: excellent (used), Amis ZBP 30 Fpjlq Nsvld Ido Dxrog Briquette diameter 2x30 Year of manufacture 2020, commissioned 2021 ?feature=shared Funnel 1m x 1m Length 2m, width 1.4m Throughput 50KG

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN Fpelot Eq E Seq N Dxrog 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: good (used), Functionality: fully functional, Complete briquetting press including: -Hydraulics Folsu N D Nmjq N Dxropg -80 mm press mechanism -Fully wired control cabinet -Oil cooler -Silo Built in 2015; unused with 0 operating hours Currently under construction * Delivery time approx. 5 weeks Press available with 1 x 1 m container if less space is available Press optionally available with 2 x 2 m containers (see attached image) Additional charge: €4,970 net Two 80 mm press units can also be installed on this silo for an additional charge (for double the throughput) Technical specifications: Industrial briquetting press including oil cooler Throughput up to a maximum of 180 kg/h *depending on the raw material Briquette diameter: 80 mm Motor: 11 kW Weight: approx. 1500 kg Machine details: The TH 814 / 820 machines are designed for operations with required throughputs of up to 180 kg/h. The sturdy press housing enables the production of solid briquettes – from materials such as wood, Styrofoam, foam, light metals, paper, or biomass. Mounting on a stable base frame ensures quick installation and enables mobile use. Impurity-resistant screw conveyor thanks to cardanic suspension The screw conveyor, which transports the material into the pre-compactor of the briquetting press, is suspended from a cardan joint. This prevents impurities from causing damage to the screw conveyor. As is often the case, the suspension chosen always depends on the specific application. For metal applications, for example, we often recommend rigidly mounted screws. Ready for shift operation thanks to optional oil cooling: To compensate for temperature differences in the hydraulic oil, the briquetting presses are equipped with a special hydraulic oil cooling system (air or water cooling). This ensures that the maximum operating temperature of the oil of 75°C is not exceeded. A safety switch automatically shuts off the hydraulic systems in the event of overheating to prevent damage. Precise cylinder control thanks to non-contact proximity switches The cylinders are electrically controlled via a non-contact proximity switch. The limit switches are located at the front and rear positions, ensuring very precise movements and low maintenance costs due to low wear. Low-wear pressing thanks to wear bushings and plates To minimize the unavoidable wear during the briquetting process, WEIMA uses easy-to-replace PU plates bolted to the filling cylinder for pre-compaction in the filling tower. In addition, a specially hardened inlay, the so-called wear bushing, is used in the pressing chamber below. This can also be quickly replaced. Overall, maintenance costs are significantly reduced.

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ Fpslqsbtnf Ee N Dxrjg driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: used, Year of construction: 1991, used frame press Fpolq N Dekwhi Hjxrog pneumatic working size 3500 x 2500 mm with medium pressure beam absolute angular accuracy without correction comfortable working height due to the possibility of adjusting all pressing corners operation of the working cylinders via 2 air valves all pressing corners are adjustable the pressures are adjustable from 0-15 bar available kit: short term storage location: Röllbach

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,800 h, Briquetting machine model A6 Plus Motor: 7,5 kW Installed power: 7.5 kW Voltage 380 V Drum size Ø 1000 mm h 920 mm Maximum material volume in the drum 0.80 m³ Maximum material weight in the drum 300 kg Pump 26 cm³ 1000 g/min Unit 2 Tank capacity 110 l Maximum operating pressure 1.5 MPa (150 bar) Briquette diameter: 60 mm Maximum briquette length per single stroke: 50 mm Production. 60/100 kg/h ("this value may vary depending on the characteristics of the material") General dimensions. Front, width, height 1650 mm 1110 mm 1410 mm (*moving side of the machine) Net weight. 750 kg Fjlsumxkxoq N Dxrepg New seal set in the hydraulic pump

Condition: good (used), Year of construction: 2019, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, ash content less than 1 % ATRO Attention with: Sand, stones and minerals - It is pressed by pressing tongs - Material must be dry, maximum 15 % ATRO New: Innovative combination of briquette and pellet Options at an extra charge: Plant construction / mütek system technology: Fpjlq Nefbb Are Dxreg - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - Screw conveyors - silos - Control linkages of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after test Mode of operation: There is a silo with agitator on the machine. In each of the 4 corners of the storage silo there is a vertical screw which compacts the material downwards into the compaction chamber. The machine works with two cylinders, each of which presses in two directions (either forwards or backwards). This results in 4 briquette outlets, each with 6 individual briquettes. *Ideal for automatic feeding of the boiler Format Ø 30 mm Throughput capacity up to a maximum of 310 kg /h Motor: 15 kW Dimensions: 3.1x2.3x2.2 m Weight: 3.55 tons Optional silo: 19.700 € net Your advantages: Compact briquette/pellet format enables firing of industrial furnaces by means of screw feed Fully automatic 24-hour operation possible High energy efficiency Briquettes/pellets with consistently high quality & density For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which accumulate in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. In contrast to our conventional briquettes, these can be fed automatically into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar residues).

Year of construction: 2025, Condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Fsledwh E Aoq N Dxrepg Location: From warehouse 54634 Bitburg - free on truck -

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Fjljkwg Tmoq N Dxrspg Availability: short term Location: Röllbach

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Only 619 operating hours Year of manufacture 2018 Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials Folq Novlv N Tj Dxrjpg such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2018, Used Weima Briquetting Press C 150 - 64 operating hours - As good as new Pictures of the press will follow in the next few days. Accessories: Automatic on/off Your Benefits Sturdy press mechanism with low-wear, chrome-plated clamps Press chamber wear bushing Pre-compressor with cushioned cylinder and screwed cover Control box with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounted on a stable base frame with rubber feet Briquette length monitoring Robust construction, low-maintenance technology, and minimal space requirements: The C-Series machines are particularly suitable for small and medium-sized businesses whose required throughput does not exceed 50-80 kg/h or 200-400 kg/day. Virtually any suitable material can be briquetted, such as wood, Styrofoam, foam, paper, or biomass. All machines are available in left- or right-hand versions. Mounting on a sturdy base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5.50 Fslq N Dxjwavgysrjpg Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (approx. kg) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the briquette length to a consistent level Pressing chamber wear bushing: Prevents wear in the pressing area Location: From stock, 54634 Bitburg - available immediately -