Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, Isdpfxsyplwfe Ad Roat We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. Ijdpfxochqxxj Ad Rjat - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2004, pressing force: 200 t, power: 0.045 kW (0.06 HP), Packing press 30x30 Mercury 120 year of manufacture 2004 Iaodpottat Ajfx Ad Rst ready for immediate collection in 8000 Zurich, Switzerland weight: 11 tons Press is ready for use and immediately available

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. Iasdpfx Aevy Drxed Ret More information or photos by email or phone.

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2014 Pressing force: 40 t Iaodpfx Adsyibyms Rjt

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Iedpoyibv Ijfx Ad Roat

Condition: used, Overall dimensions: 2800x2570x2000 mm Iasdoyibhkopfx Ad Rst

Year of construction: 2010, condition: good (used), Very good solution to use one press for two different materials and You don't have any problems to sort them later. Capacity 20 m3. 5,5 kW 400/32 A Iasdpfegzulusx Ad Rjt

Condition: good (used), Europress by CK. press force 30 t. Bale weight 280-320 kg Iodpfx Adsycw Ebj Reat

Condition: good (used), Verical baler with 30 t press force Ijdpsycw Dwefx Ad Reat

Condition: good (used), 20 m3 press container from Europress. Dimensions: L 6510 mm, W 2500 mm, H 2700 mm Iajdpfoycwyxsx Ad Rot

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Iaodpfxsyqw Sqj Ad Ret Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Iajdjra Nqhjpfx Ad Rjt Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Iasdpfx Adora Aghj Rjt Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Iaedpfx Aev Al Tied Rot Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Iasdpfx Aov Alacod Rot Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Iodpfsx H R U Ssx Ad Reat Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Isdpfxsw R Rane Ad Roat Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler Iodpsxnb Nysfx Ad Roat -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ Isdpoxrpi Ajfx Ad Roat -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Iedpfeyhbxcsx Ad Reat

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, power: 35 kW (47.59 HP), Hydraulic Briquette Press Manufacturer: Winter Model: BP 450 Year of manufacture (according to nameplate): 2022 Technical data: Maximum output: 450 kg/h Motor: 35 kW / 400 V, 50 Hz Chip compression: min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture content < 14% Briquette dimensions: Length 150 mm, Width 60 mm Dimensions (L x W x H): 1,800 x 1,800 x 1,900 mm Weight: 3,000 kg Screws for material feed are included. Isdpfxoymwxvo Ad Rsat Net purchase price: €37,900 plus legally applicable VAT. VAT will be shown separately on our invoice. Subject to alterations, errors and prior sale. Sale is made without guarantee or warranty and exclusively to businesses. Enquiries will be processed from Monday to Friday, between 8 am and 4 pm.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Iasdjypb Awspfx Ad Rjt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles Iedpfxeygud Ae Ad Roat The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: excellent (used), Year of construction: 2024, Baling Press, Bramidan X30 LP, 30 t pressing force – used, as new: Price ex site: only €12,750 (net) Manufacturer: Bramidan Model: X30 LP Year of manufacture: 2024 Bale size WxDxH (mm): 1200 x 800 x 800 Iaodsx Uwfyspfx Ad Rot Filling opening WxH (mm): 1090 x 530 Cycle time (average, s): 25 Dimensions WxDxH (mm): 1760 x 1255 x 1995 Weight (kg): 1450 Stroke (mm): 950 Number of bindings: 4 Binding type: Tape / Steel wire Automatic bale ejector Bale weight: - Cardboard (kg): 225-325 - Plastic film (kg): 275-375 Pressing force: 30 t Material types: - Cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, rigid plastics, textiles, polystyrene. Noise level: 59-60 dB Low-profile baler with high pressing force Suitable for a wide variety of recyclable materials Low overall height High pressing force Very low noise level Up to 80% savings on volume, space, transport, and CO2 Powder-coated finish ensures durable, clean surfaces in various colours Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Previous new price: €17,490 (net) Condition: very good Availability: immediately Location: 15745 Wildau (near Berlin)