Year of construction: 2018, condition: ready for operation (used), This EXCITECH MCA-03H-01-1225 was manufactured in 2018. It features a refrigeration capacity of 300 W, a power supply of 50 Hz, and an input power of 250 W. Rated current stands at 1.1 A with a filling amount of 180 g. Consider the opportunity to buy this EXCITECH MCA-03H-01-1225 wood mill. Contact us for more information. Application Types Milling (Wood) Ijdex Ixiyopfx Agzeik

Condition: excellent (used), functionality: fully functional, power: 72 kW (97.89 HP), fuel type: diesel, overall weight: 5,200 kg, operation weight: 5,200 kg, axle configuration: 4x4, first registration: 02/2011, Year of construction: 2011, operating hours: 10,247 h, Equipment: hammer hydraulics, hydraulics, Hansa APZ 531/SW/Cemetery Excavator/All-Wheel Drive/Tele Arm • Manufacturer: Hansa Iijdpjx Higyofx Agzjk • Model: APZ 531 • Year of manufacture: 2011 • Operating hours (current): 10,247 hrs • Power: 72 kW / 97 hp • Drive configuration: 4X4 • Earth grabber 760 mm x 900 mm with 9 teeth • Telescopic arm • All outriggers adjustable horizontally and vertically • Rear right outrigger telescopically extendable • Hydraulic breaker circuit • Trailer hydraulics • Trailer hitch for unbraked trailers • Jaw- and ball-type trailer coupling • Hydraulic telescopic boom • Quick coupler • Radio • 40 km/h road approval • Gross weight: 5,200 kg • Excellent condition • German machine • Ready for immediate operation • Sale according to §25A (no VAT can be disclosed) • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions (GTC).

Condition: used, Log centering system for aligning logs with 6 rollers before cutting in sawmill systems. Technical specifications: on demand Iodoxyw Dkspfx Agzoik feed: max about 70 m/min Hexagonal diameter: max. approx. 45 cm

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, overall weight: 30,000 kg, The machine is currently still in operation and can be inspected at any time. A 5 27 inch up to 680 mm diameter. Feed up to max. 90 m/min. Weight approx. 30 tons. Shortest wood 2.4 m. Also well suited for long timber. When relocating the machine, some repairs should be considered, e.g. valves, bearing of the swing arm, etc. Rotor bearings are in good condition. The rotor has been replaced. Isdpsx E Tb Ssfx Agzsik

Condition: excellent (used), Catalogue number 7756 Isdoxhcrpjpfx Agzeik TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Condition: used, functionality: fully functional, – hydraulic blade stroke TECHNICAL SPECIFICATIONS: Iiedpjx Ekm Ssfx Agzok – motor power: 5 kW – max. blade diameter: 500 mm – max. cutting height: 145 mm – max. cutting width: 750 mm – hydraulic blade stroke – overall table size: 1080 x 780 mm – height from base: 750 mm – infeed roller table: 260 cm / outfeed roller table: 240 cm – roller width: 510 mm – roller diameter: 80 mm – distance between rollers: approx. 400 mm – machine dimensions (L/W/H): 145 / 115 / 130 cm – weight: ~ 300 kg

Year of construction: 1999, condition: ready for operation (used), Main Drive Spindle Speed 6000 RPM Spindle motor power 11 kW This WEINIG QUATTROMAT 23 P was manufactured in 1999. A robust wood mill, it features a working width of 13-230 mm and height of 6-120 mm. It includes four spindles with motor powers ranging from 4 to 11 kW, ensuring efficient operation. The feed speed is 8 m/min, and the spindle speed reaches 6000 rpm. Consider the opportunity to buy this WEINIG QUATTROMAT 23 P wood mill. Contact us for more information. Iiodpfx Agox Enk Ijzok Application Types Milling (Wood)

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 8124, Esterer VET-S already dismantled without electrics The VET-S is sold as is, in its current condition. Year of manufacture: 1981 Factory number: 8124 Iedouy H T Njpfx Agzoik

Condition: used, Log centering system for aligning logs with 4 rollers before cutting in sawmill systems. Iisdpexyw D Rjfx Agzjk Technical specifications: on demand feed: max. about 70 m/min Hexagonal diameter: max. approx. 45 cm

Condition: ready for operation (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, feed length X-axis: 8,700 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 1,200 mm, type of input current: three-phase, overall weight: 2,000 kg, total width: 2,500 mm, total height: 2,500 mm, saw drive: 11,000 W, total length: 10,000 mm, input current: 25 A, input voltage: 400 V, Equipment: documentation/manual, Woodmizer LX250 bandsaw in excellent condition. Sawing length of 870 cm; this machine cuts logs up to 140 cm in diameter. Comes with 30 saw bands included. Iedpfx Ajx Hu Upjgzoik

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke Iodowtqbfopfx Agzjik - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: used, Log feeder with limit switches and motor. Length 6.30 m, width 1.70 m, height 1.15 m, weight under 5 t. Ex works price: 6,000 EUR. Iodjxdckqjpfx Agzjik

Year of construction: 2024, operating hours: 1,448 h, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis GEWEMA Axolox 4021 was manufactured in 2024, featuring a robust CNC Wood Router design. It includes a high-frequency spindle, vacuum table with adjustable sections, and a comprehensive control set with safety features. Ideal for intricate woodworking, it comes with a Mini PC, Beamicon22020 software, and additional licenses for enhanced functionality. If you are looking to get high-quality milling capabilities consider the GEWEMA Axolox 4021 machine we have for sale. Contact us for more information. Application Types Milling (Wood) Iijdpfx Agsx D Ndkezek

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Iijdpfox I Skdjx Agzsk

Condition: used, Impregnation bath or dipping bath Wichmann type 13,000 L for soaking / dipping of whole wood packages with hydraulic lift and circulation pump. Package size: max. 590 x 100 x 120 cm length: 6.000 mm width: 2.200 mm Iijdpsx Hf Hcsfx Agzjk height: 3.250 mm Filling quantity: max. 13,000 L

Condition: like new (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, feed length X-axis: 8,700 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 1,200 mm, type of input current: three-phase, overall weight: 2,000 kg, total height: 2,500 mm, saw drive: 11,000 W, total length: 10,000 mm, transport length: 10,000 mm, input current: 25 A, input voltage: 400 V, Equipment: documentation/manual, Woodmizer LX 250 in excellent condition with extended bed, year of manufacture 2022, maximum cutting length 8700 mm, maximum cutting width 1400 mm, includes 35 saw bands. Iodpfxox Hrp Do Agzeik

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Iiedpfx Aex Hhxhjgzjk Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Equipment: crane, Baljer & Zembrod, ASX I, slewing ring from Baljer & Zembrod renewed, price 13,000 EUR ex works. Isdpfjxb Upmsx Agzeik

Year of construction: 2008, condition: ready for operation (used), Table Table Length 2500 mm Main Drive Iedpfjx D Iwcsx Agzsik Spindle Speed 8300 RPM This SCM Superset NTE was manufactured in 2008. A robust used profile milling machine featuring a touchscreen operation, 6 spindles including a UNIWELLE, and a spindle speed of 8300 rpm. It offers a working width up to 240 mm and includes a quick-change spindle system with Powerlock HSK 85. Ideal for detailed woodworking with its comprehensive tooling and motor-driven feed rollers. Contact us for more information about this machine. Application Types Milling (Wood)

Condition: used, length: 450 mm Ijdpotr R D Aefx Agzjik width: 40 mm height: 50/70 mm Hole spacing: 50 mm number: 45 pieces Lot of new polyethylene (PE green) carriers for a block hoist in a sawmill.

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Iiedex Hhw Rspfx Agzjk Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Infeed length: 8270 mm / Max. timber length, infeed: 16000 mm / Max. timber length, outfeed: 12000 mm / Infeed cross conveyor, 5-strand, 2200 mm / Extendable timber support table / AQF strand with shaft extension, 2900 mm / Under-table pivoting crosscut saw /Straight safety guard flap / Waste disposal downwards / Control for waste disposal system / Universal milling unit, 5-axis with profile cutter / Dovetail cutter / Finger joint cutter / Combination support for vertically operating tools / Drilling unit, 3.0 kW / Finger cutter 1 / Combination support for horizontally operating tools / Slotting unit, 480 mm / Drilling unit 1, 2.2 kW / Drilling unit 2, 2.2 kW / Marking device, reference side / Marking device, operator side / Pneumatic beam turning station / 7-arm outfeed table/ Extension roller conveyor, 5300 mm This HUNDEGGER K2-5-450 was manufactured in 2005. A robust timber framing machine, it excels in cutting, milling, drilling, and slotting for timber construction. Features include an 8.27m infeed length, extendable timber support, and multiple drilling units. Ideal for precise wooden component processing. Contact us for more information about this machine. Iedpsx D Ibhjfx Agzoik Application Types Milling (Wood)

Condition: used, overall length: approx. 3,270 mm D1: 190 mm Iodpslf H Uzsfx Agzeik D2: 150 mm material thickness: 50 mm Material thickness: 50 mm Center distance: approx. 3,020 mm Connecting rod / gate stilt / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD gate.

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm Iisdpfx Agjx E Shwjzek - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Year of construction: 2007, condition: ready for operation (used), This wood mill was manufactured in 2007. It features a comprehensive window production line including a Weinig UC Matric and a Biesse WinLine One, capable of operating independently. The setup includes multiple spindles for diverse machining operations, a cross-cut saw, drilling, and trimming units. Ideal for businesses looking to enhance their window manufacturing capabilities. Contact us for more information about this machine. Application Types Iiedpfx Ajx D Nz Ajgzek Milling (Wood)