Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches Dsln Ulob A Iwcj Itjut -Die jaws: 2" inches -Antrie: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 Delnjt Dwtmo Ul Itsut • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 Djln Usuf N S Ael Itsut automatic changeover right - left Total length 295 mm Diameter 105 mm

Condition: used, Year of construction: 1979, bar material dia. max. 50 mm keins Dusljucgu Ajn Ul Itst ja

Condition: used, Year of construction: 1998, Semi-automatic thread cutting machine for bolt threads 6 - 72 mm, 1/4 - 23/4", pipe threads 1/16 - 21/2", 16 - 63 mm. Machine on stand. Pole-changing three-phase motor Right and left rotation Weight: approx. 250 kg Dujln Ul Ier D Tnzstot

Condition: used, Tapping machine REY RC40 Duolnovxlqae Ul Itst

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch threaded jaws: 1/2 "- 1 1/2" inches -Weight: 9.5 kg Djln Uoc T Nx Nel Itjut

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor Delet Dwtgsn Ul Itout - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Condition: excellent (used), Thread cutting steel (108141) Deln Uoigqr Rjl Itout Make Comet Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Year of construction: 2008, Condition: refurbished (used), Top condition Pee-Wee thread rolling machine from a trade-in. The machine was disassembled and mechanically and electrically overhauled. New SIEMENS SPS and new electric. 30t forming force Dusln Ul Isd Nq Tcetot

Condition: used, Thread cutting machine for pipe threads (1/16) 1/8 - 2", 16 - 63 mm, bolt threads (6) 1 - 6 mm, 1/4 - 2" Delnorq Nr De Ul Itsut With mobile base frame about 100 kg

Condition: like new (used), Year of construction: 2015, 1 used automatic threading machine make Hagen & Göbel type HG - 16 E-A year 2015 Serine number 020604 Dslsuau E Rjn Ul Itjut Technical data: Cutting range:M4-M16 in steel M4-M20 in cast iron M4-M22 in aluminum and brass Speed range:a) 450 - 2800 1/min b) 280 - 1800 1/min c) 180 - 1120 1/min d) 112 - 710 1/min e) 56 - 355 1/min Single stroke and continuous stroke function Piece counter Motor power:2.2 KW equipped with: Two-hand operation foot switch Light barrier 2 spindle drill head Minimum quantity lubrication system

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1" inch -Transport box -Weight: 8.5 kg Dujln Ul Iob A Nfgotot

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Dujln Uleh A S Hto Itot Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: like new (used), Tapping dies R 2 for GA 4 Tapping dies for Georg Fischer GA 4 tapping machine as new Duolnoivzcks Ul Itst GF Art. 012209

Condition: good (used), 1 x thread rolling machine Thommen G 07 / PR - 07 Technical data: Pressure capacity: 7 tons Diameter: 1.2 - 22 mm Max. width in plunge-cut mode: 55 mm Roll diameter: 65 - 95 mm Duolnsvwdb Us Ul Itet Shaft mount: 28 mm The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Dujln Uevc A U Dsl Itot Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: used, Year of construction: 1990, thread dia. bis 4" / 100 mm Dusln Usu Ahqbel Itjt threading length ? mm thread pitch div. mm accessories: 4 Schneidköpfe total power requirement 0,75 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,5*1*1,4 m

Condition: used, Thread cutter, tapping machine, tapping machine -Manufacturer: Fein, tapping machine type ASg 636 -Rated consumption: 280 watts -Max. Cutting capacity: M8 Dueln Uljb A N Ibo Itot -Speed: 450 rpm -Connection: 220 volts -Number: 2x tapping machine available -Price per piece -Dimensions: 330/150/H80 mm -Weight: 2.3 kg

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge Djln Ul Ieupbf Djtsut - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Year of construction: 1990, thread dia. 1/4 bis 3 " / 75 mm threading length ? mm thread pitch ? mm turning speeds 33 U/min total power requirement 1 kW voltage 230 V weight of the machine ca. 0,074 t dimensions of the machine ca. 1,2*0,8*1 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch Doljt Ip Anon Ul Itsut

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Duelnsb A N I Ne Ul Itot Tapping machine, pipe thread cutter -Inch thread: 1/2"-2" inch -Weight: 15 kg

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Doln Ul Iehgnd Ajtout Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter Dsln Ujb A N U Nsl Itjut -Inch thread: 1/4"-1 1/2" inch -Weight: 8 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1" - 2" inches -Transport box Deln Uleb A Riio Itout -Weight: 11 kg