Used other threading machines for sale (21)

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg Gjleyn H Rdshccqmjua External reference: Pieper - Lot 68

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Guelhcceyurx Tjqmea Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3R21TRC, 3R21 TRC SPECIAL RAILWAY SCREW THREAD ROLLING MACHINE SPECIAL RAILWAY SCREW THREAD ROLLING MACHINE Gjlhccqsy Auaqemeua The workpiece drawing is attached. The workpiece, heated by induction, is manually loaded into the machine. This is a test machine. The sales price is negotiable.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3R21TRC, 3R21 TRC SPECIAL RAILWAY SCREW THREAD ROLLING MACHINE SPECIAL RAILWAY SCREW THREAD ROLLING MACHINE The workpiece drawing is attached. The workpiece, heated by induction, is manually loaded into the machine. This is a test machine. The sales price is negotiable. Gujlhcjy At U Hscqmoa

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydraulic Thread Cutting Machine / Tapping Arm from CMA Model RHR(M) 30 D+ (demonstration unit) Technical Data: Golhccqjyq Hf Tsmeua Year of manufacture: 2025 Speed: ÷125 + ÷500 RPM Torque: 255 + 64 Nm Mount: 2/Ø31 Radius: 1800 mm Capacity: M4–M30 (steel) Weight: 290 kg • Articulated arm technology: Effortless positioning of the tool above the workpiece. • Operator relief: Absorption of reaction torque protects the operator. • Quick-change system: Tool-free change of threading inserts with slip clutch. • Reduced tool breakage: High stability and precise guidance prevent tap breakage. • Increased efficiency: Significantly faster processing times compared to manual methods or large machining centers.

Year of construction: 2006, condition: good (used), functionality: fully functional, The PEMSERTER® Series 4® machine is a fully pneumatic machine. Pemserter Series 4 Serial No: J-3478 Weight – 260 kg Air pressure – 6-7 bar. Gslhcjywkvqecqmsua Year of manufacture – 2006 Used, in good condition, fully operational with all tools.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Gslhccoyl U Tueqmeua Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Legal Notice: Gslhcsyn Snhscqmeua Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 - Speed: 700 RPM Gjlhcjydlzyecqmsua - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg Gjlhccsi Huvhoqmsua

Condition: ready for operation (used), An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Gjlhccqsxnbrusmeua

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller Gujlhcopit Afscqmja type L 2 serial number 68/1724

Condition: used, Year of construction: 1956, functionality: fully functional, We are selling a Koepfer Furtwangen machine for gear milling. Gueleyi U Imohccqmja

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Guolsxx Nuxehccqmoa Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: used, Powerflex IV Thread Cutting Machine, Thread Cutter M8 - M27 75 rpm - 900 rpm Reach: max. 1200mm radius Guolhoq U Sfpeccqmoa Year of manufacture: 2008 You are welcome to schedule an inspection appointment. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: excellent (used), Tapping attachment Type Efem MK 3 Guelhccqst R S Avjmoa (28520) Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Diameter 109 mm Weight 7.5 kg

Condition: used, Thread cutting chuck, thread cutting head WMW type GSA 2 Taper: MT 2 Threading capacity: M 5 - M 16 - Adjustable slip clutch Net weight: 3 kg Automatic right/left rotation with holding bar. The machine does not require its own reversing function. The tap is clamped at the shank and the square with adjustable drivers. Goloxf Uymshccqmeua Both drivers are missing (but can be manufactured relatively easily) For cutting right-hand threads.

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Gujlhccjt Hwn Noqmsa

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t Golhcjtzdyzocqmjua dimensions of the machine ca. m

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Gjlhoibmn Eeccqmsua

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm Guelhccqef Tcy Domea - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg