Used Vertical turning lathes for sale (196)

Condition: used, TECHNICAL DETAILS - Max. turning Ø : 520 [mm] - Strokes (X/Z) : 1000 / 400 [mm] - Max. push on X and Z : 1100 [daN] - Quick feeds (X/Z) : 45 / 30 [m/min] - Ball screw diameter (X/Z) : 50 [mm] - Spindle nose : A2-11 - Spindle motor power : 71 [kW] - Spindle speed : 0 - 3400 [Rpm] - Max. chuck torque : 750 [Nm] - Number of positions on turret : 12 - Number of motorized positions : 12 - Tool-holder type : VDI50 - Machine alone dimensions : 4.050 x 1.960 [mm] - Installation dimensions : 8.500 x 5.000 [mm] - Machine weight : 13.500 [kg] - Installed power : 45 [kW] - Electric supply : 400 V, 50 Hz EQUIPMENT - CN SIEMENS 840D - Interface : RS232 / RJ45 / USB - Touch part sensor Marposs - 1 fixed tool support on table : Capto C6 - Lubricating tank - HP coolant tank : 23 [bars] - Cooling tank - Chip conveyor KNOLL - Part conveyor capacity : 70 - 320 [mm] - Rotary tool holders number : 6 - Fixed tool holders number : 6 - Chuck 3 jaws Forkhardt Ø : 400 [mm] Dkjbvtaeuhbfgsizel

Condition: ready for operation (used), Year of construction: 2007, A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. Dkjbvtaordhh Ssizol

Condition: excellent (used), Year of construction: 2004, operating hours: 22,953 h, Functionality: fully functional, machine/vehicle number: 0680000211, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 5,000 rpm, New PCU in 2018! TECHNICAL DETAILS Speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Control: Siemens Sinumerik 840D, POWER LINE Travel paths X-axis: 650 mm Y-axis: ± 50 mm Z-axis: 300 mm Turret and tools Djbvsvvii Ustaizskl Turret: 12 positions Tool holder: VDI 40 Tool speeds: 4,000 rpm Tool drive power: max. 11.7 kW MACHINE DETAILS Pallet conveyor: EWAB, loading station on the right Machine weight: approx. 8 t On-time hours: 34,982h Spindle hours: 22,953h EQUIPMENT - Measuring probe - Driven tools - C-axis - High-pressure pump with 20 bar, 500 l and double changeover filter - Immersion cooler for coolant - Electrostatic suction of LTA - Collecting tray under the machine - Kitagawa 3-jaw chuck B210 - EWAB pallet conveyor with loading station on the right - Chip conveyor

Year of construction: 1993, Condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Djbvegulkiotaizjkl Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Condition: used, Year of construction: 2005, Functionality: fully functional, frequency: 50 Hz, power: 45 kW (61.18 HP), The second-hand Twin Aces BRAVE-F1 model was manufactured in 2005 and is in perfect working condition. Its technical specifications are as follows: Serial No: B05046 Installed Power: 45 kW Voltage: 380V AC ±%10 Dobsv Hdlfjvtaizekl Frequency: 50/60 Hz

Condition: good (used), CNC FAGOR 8070 PLATFORM DIAMETER 400O MM MAXIMUM TURNING HEIGHT 2500 MM Dobsvygvtsvtaizekl MAXIMUM TURNING DIAMETER 4000 MM PERMITTED WEIGHT 100 TON MAXIMUM VERTICAL DISPLACEMENT OF THE CROSSBEAM 1600 MM CARRIAGE DISPLACEMENT ANGLE -15/ + 40 ° PLATFORM ROTATION 0.46 - 42.5 RPM CROSSBEAM SCREW FEED RANGE 240 CARRIAGE RAPID FEED 3125 RPM MAIN MOTOR POWER 60 KW NR 02 TURNING CARRIAGES OVERALL DIMENSIONS 6100 X 10400 H 8400 MM WEIGHT 134 TON YOM 1980 - RETOFITTED 2010

Condition: good (used), Webster & Bennett CNC Ram Type VTL Year 1986/2005 Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Dkjbvjtv Nm Detaizol Automatic Tool changer Tooling Table Jaws Swarf Conveyer

Year of construction: 1996, Condition: ready for operation (used), X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible. Dkobvoriwfmstaizel

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 315 mm, chuck outer diameter: 445 mm, spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 320 mm, Equipment: documentation/manual, Tools in the pictures are included in the scope of delivery. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 D Speed: 4000 rpm Swing diameter: 450 mm Dkjbvovvt D Ajtaizjl Travel path - X: 850 mm Travel path - Y: 315 mm Travel path - Z: 315 mm Rapid traverse speed X-axis: 45 m/min Rapid traverse speed Z-axis: 45 m/min Lathe chuck diameter, max.: 445 mm Turret positions: 12 pieces Holder: VDI50 Workpiece diameter: 270/320 mm EQUIPMENT - EMAG disk turret - 12x VDI 50 for driven tools - Documentation available

Condition: good (used), Year of construction: 2011, For sale is an EMAG VL 5i F ex location Dobvjup Tinetaizjkl

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the Dkjbvtajvxuc Eoizol greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm Dkjbvtajvb Dq Doizel turning height: 275 mm x-axis: 925 mm z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: as good as new (ex-display), Year of construction: 1997, machine/vehicle number: 1MB241H-6D-A111-A1, spindle speed (max.): 5,000 rpm, input voltage: 380 V, overall weight: 400 kg, power: 18 kW (24.47 HP), Spindle from Weiss GmbH, type 174405B, year of manufacture 1997. Unused, stock. For further details see type plate / pictures. Packaging and loading included. Dobstq H Susvtaizekl

Condition: ready for operation (used), Year of construction: 2006, A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. Dkobvtaierdhh Iozsl

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 626 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, workpiece diameter (max.): 260 mm, Equipment: documentation/manual, Tools in the pictures are included in the sale. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Travel path - X: 626 mm Travel path - Z: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Z-axis: 30 m/min Turret positions: 12 pieces MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - Pallet conveyor WPS Dkebsvvt A Ssvtaizsl - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Manufacturer Scherer Feinbau Type VDZ 220 DS Year of manufacture 2010 Control Siemens Technical data Chuck diameter mm 315 Drive power (100%ED) kW 37.7 Torque (100%ED) Nm 300 Max. speed rpm 5500 X-stroke mm 625 Dobvevu R I Notaizjkl Y-stroke mm +100/-80 Z-stroke mm 250 Tool system VDI 30+40 Spindle interface A6

Condition: good (used), Year of construction: 2012, machine/vehicle number: 103345, - Control Siemens Sinumerik - Chip conveyor Knoll Frequency: 50 Hz Operating voltage: 400 V Debvtaohur Skoizjkl Connected load: 43 KW Rated current: 78 A

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Dkjbvtjkyth Ieaizol Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: good (used), Year of construction: 1952, Functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,600 mm, workpiece weight (max.): 12,000 kg, VTL SK25, complete Dobvtaisvulczozekl

Condition: refurbished (used), Plate diameter 1300 mm Max. turning diameter 1900 mm Vertical traverse travel 1200 mm Max. turning height on chuck 1700 mm Chuck motor power 52 Kw Revolutions of the plate: RANGE 1 0-100 Rpm RANGE 2 0-400 Rpm Vertical travel Z axis 700 mm X-axis transverse travel 2650 mm Dkobjmdqibsvtaizol Driven tool 24 Kw Driven tool revolutions: RANGE 1 0-400 Rpm RANGE 2 401-2000 Rpm C-axis with Heidenhain angular encoder +-5". 6-spindle changer for turning tools. One of them with CAP-TO C-6 with two outputs. 2 pallet changer for the chuck. Machine repaired and mechanically adjusted. CNC and digital drive to be chosen by the buyer.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Dobvjia Rtdjtaizjkl Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 97128, travel distance X-axis: 625 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, turning diameter: 250 mm, turning height: 200 mm, clamping diameter: 315 mm, TECHNICAL DETAILS Control: Siemens 840 D turning diameter: 250 mm Rotation diameter: 250 mm Turning height: 200 mm Djbvtjuyi Icsaizokl Chuck diameter: 315 mm Travel distance X-travel: 625 mm Y-travel: +100 / -80 mm Z-travel: 250 mm Spindle Spindle speed (max.): 5,500 rpm Drive power of the synchronous spindle: 37.7 kW Max. Torque: 300 Nm Tool system Tool system: VDI 30 + 40 Machine bed Material: Hydropol (special concrete and steel) Typical components: Ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings, joint journals, MACHINE DETAILS Machine weight: approx. 8 tons Total power requirement: 37.7 kW Note: Machine is set up but not connected & can be inspected under power on request

Condition: excellent (used), Year of construction: 2017, operating hours: 32,952 h, Functionality: fully functional, travel distance X-axis: 850 mm, controller model: Siemens 840D-SL, EMAG VERTICAL TWIN-SPINDLE TURNING CENTER - VSC 160 TWIN Machine was in production until 08/2024 (interlinked with several machines) Dobvoui Hm Sotaizokl Available immediately System is dismantled ready for transport Self-collection at the Haldensleben site Optional loading/transport can be offered

Condition: excellent (used), Year of construction: 2017, operating hours: 39,603 h, Functionality: fully functional, controller model: Siemens 840D-SL, VERTICAL TWIN-SPINDLE TURNING CENTER - EMAG VSC250 TWIN Systems (operating hours and wear similar): 3x VSC250 TWIN available Machines were in production until 08/2024 (interlinked with several machines) Available immediately Dsbvtjuiw E Soaizskl Systems are dismantled ready for transport Self-collection at the Haldensleben site Optional loading/transport can be offered

Condition: repair required (used), Year of construction: 2003, Functionality: fully functional, Vertical lathe SCHUSTER Futureline VTM 350 8x Schuster VTM 350 available Available from 03/2025 System is currently still connected, in production and can be inspected. The system is currently operated interlinked (2x VTM 350 and 1x assembly machine) Dsbvtaisu Dlpdezekl Self-collection at the Haldensleben site - professional transportation from the hall The system is offered disconnected and dismantled from the interlinking.