Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Pedjzhg Eyspfx Abzogn Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds as needed: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), infeed hood, Available from approximately the end of July.

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation Pgsdpevrz Rvsfx Abzsn

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Pgjdpfxownfwqo Abzsn Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Podpfjxx Tigsx Abzogn Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Podsxx N T Iepfx Abzegn Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Pgjdpfx Absyhckmjzen Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit Pjdpfexx N Dgsx Abzjgn - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. Podpfx Abozbxwiezsgn The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Pgjdozbxvlopfx Abzsn Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Psdpfx Abszgfizozegn Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: used, Year of construction: 2012, operating hours: 53,154 h, functionality: fully functional, pressing force: 120 t, filling opening width: 1,800 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 730 mm, total width: 4,700 mm, total height: 4,600 mm, total length: 13,100 mm, overall weight: 28,000 kg, warranty duration: 12 months, Equipment: documentation/manual, For sale is a bale press, model "EP 1000 V5 H3," manufactured in 2012, featuring both horizontal and vertical tying mechanisms. The pictures show the machine in its assembled state. It is currently located at our facility in Lathen. The press is sold without a conveyor belt. Pgsdpezggd Tofx Abzon Prior to delivery, the machine will be completely overhauled and technically refurbished by our qualified technicians. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-related components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and fasteners • Inspection of electrical components and safety devices • Inspection and readjustment of the tying mechanism • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Through this comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, please do not hesitate to contact us.

Condition: used, Year of construction: 2010, operating hours: 4,054 h, functionality: fully functional, pressing force: 90 t, filling opening width: 1,450 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 730 mm, total width: 2,500 mm, total height: 3,850 mm, total length: 12,000 mm, overall weight: 23,000 kg, warranty duration: 12 months, power: 90 kW (122.37 HP), Equipment: documentation/manual, For sale is a baling press, model "EP 6100 V5", manufactured in 2010. Prior to delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operations. Pgjdozgganepfx Abzjn The overhaul includes, but is not limited to, the following services: • Disassembly and inspection of relevant machine components • Assessment of all wear-related components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of electrical components and safety devices • Inspection and readjustment of the bale tying mechanism • Cleaning, assembly, and commissioning of the overhauled machine • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Pgedpozgf Hgofx Abzjn Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) Pjdpfx Abszgx H Hezegn * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Pjdpfxjvnmcvs Abzogn

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, empty load weight: 5,200 kg, DGUV certified until: 02/2027, We are offering this used Husmann SPB 20 FKL press container, manufactured in 1999, for sale. Type: SPB 20 FKL Machine No.: 18590 Volume: 20.0 m3 Power: 5.5 kW Unladen weight: 5200 kg Permissible total weight: 12000 kg Voltage: 400 V Pgodpfszg Ha Ijx Abzsn Year of manufacture: 1999 Last maintenance (UVV & DGUV): 02/2026 Two-part lid for ramp access Steel scraper Fully functional If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Manufacturer: Bergmann Type: PS 8100E Pgsdpfx Abszbygrszen Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Pjdpfxszbygfs Abzogn Available: from Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Pgedpfx Aszbyf Iebzjn Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. Pgjdjzhkzrspfx Abzjn This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Pgodpfezhkybsx Abzjn Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, Psdpfxjy Duuwe Abzjgn original vehicle papers. Service was done. New tyres in April 2026. In very good and working condition.

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Pgjdpsyuvr Rofx Abzen

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Podpfxsydmgdj Abzegn Foldable discharge conveyor, overband magnet, radio remote control. Service new in February 2026.

Condition: used, Year of construction: 2004, The device is in working condition. Pgsdpfxjw Tbfge Abzon