Injection molding machine

Arburg 270C 500-100

Year of construction: 1996, operating hours: 24,222 h, condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. Dodpspwh Akjfx Ah Uswd - Brand: Dr Boy - Model: 80M - Year of construction: 1996 - Screw diameter: 42mm - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Year of manufacture 2003 Sprue picker 2x PIECES Dodshrw Amepfx Ah Ujwd

Condition: like new (used), Year of construction: 2007, operating hours: 58,263 h, functionality: fully functional, machine/vehicle number: 203130, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions: L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Fully functional Condition very well maintained Extras Handling interface Thermoplastic screw/barrel 25 mm, highly wear-resistant Selogica control system Injection unit Screw diameter 25 mm Injection weight 54 g/hp Injection pressure 2500 bar Injection volume 59 cc Clamping unit Clamping force 50 t/500 kN Tiebar spacing 320 x 320 mm Clamping platens 446 x 446 mm Mold installation height 200 mm Maximum spacing between platens 550 mm Ejector stroke/force 125 mm/30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Dwedpjv U Tl Djfx Ah Ued Constant maintenance by the manufacturer and previous owner Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for which maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: excellent (used), Boy 80M Year 1998 Dwjdpfx Ahemt Hh Ee Usd Closing 80 tons Scrow 36 mm Spray weighted 132 g spar distance 41x 35,8

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Dsdpfx Ahoi Igiks Ujwd Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 1095 mm Measurements depth 3033-3448 mm Measurements height 2010 mm Machine weight 3030 kg Clamping Unit Clamping force 500 kN Opening stroke 400 mm Dwsdpfjwvwbwsx Ah Uod Distance between bars 360 x 335 mm Mould height min 250 mm Ejector stroke 80 mm Ejector force for / back 20.4 kN / 13 kN Media Oil tank 200 liters Additional Equipment Screw diameter 32mm (SP 82)/ Clear width between tie bars 360mmx335 (hxv) /Maximum ejector stroke 80 mm/ Maximum injection weight PS 69.5/ Minimum mould height 250 mm /Maximum special injection pressure 1076 This BOY 50 E hydraulic injection moulding machine was manufactured in 2024. It features a maximum clamping force of 500 kN, a maximum opening stroke of 400 mm, and a total installed power of 16.8 kW. The machine dimensions are compact, with a length of up to 3448 mm and a width of 1095 mm. Consider the opportunity to buy this BOY 50 E hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Dwjdpfeuykh Dox Ah Usd Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Dwjdepu R Ncepfx Ah Uod Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: like new (used), Year of construction: 2011, operating hours: 1,342 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Screw size: 16mm Max opening distance: 160mm Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Mold ring size: 100mm Dsdpfjtmtnlex Ah Uowd Bulkhead volume: 10cm3 Shot weight: - Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Dwodpfx Ahow R Dg Ue Ujd