Injection molding machine

BATTENFELD TM 100/525

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Iasdpfx Aheu E E Susysl Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Isdpov Ha Uijfx Ahyeal Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: excellent (used), Year of construction: 2003, Engel Victory 330/80 power Closing 80 tons Snow diameter 35 mm Spray weight 158 cm3 Year 2003 Enlarged clamping plate 660x600 Isdpfx Aeiubdqehyjal

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Iodpfx Ahok Rnvmoyeal Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service. Isdpfx Ahov N D Raoyeal

Condition: good (used), Machine in very good condition I have 5 pieces Iaodsvuturspfx Ahyjl

Condition: excellent (used), Year of construction: 2015, clamping force: 1,300 kN, Arburg 520S 1300-400 (2015) Clamping force: 130 t Screw diameter: 40 mm (higly wear resistant) Shot weight: 184 g Distance between tie bars V: 520 mm Iodpfewv Hrxjx Ahysal Distance between tie bars H: 520 mm Min/Max mould height: 350mm Opening stroke: 925mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic (Arburg servohydraulics) Hours: 28.000 hours only! \+ Apex Sprue picker robot 4 free cooling circuits Core pullers: yes

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Iodewq D Nqopfx Ahysal Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Iodew Dy H Sspfx Ahyeal Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 800/315 CDC Iaodpsr Nf R Isfx Ahysl Closing 80 tons Year 1997 Scrow 40 mm distance between tie bars 37x42