CNC lathe

DMG MORI SPRINT 32-8

Condition: like new (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Offering an as-new DMG MORI bar guide with 2000 operating hours, including an IEMCA BOSS 338 Type 32LL bar feeder. Giedpfsyw S Emjx Af Sjt

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Gjdpfxet Hw N Ho Af Sjit Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request! Godpfsxzq Ncox Af Seit

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Gjdpfx Afjuav H Ns Soit Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, sound and control cabinets, operating hours 43,698, spindle hours 5,401

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, Gisdpfx Aepumdcsf Sot tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Gjdpeynmpyefx Af Seit Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and Gijdjuddcajpfx Af Sot over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Gisdpfxei Ar Rus Af Sot Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Gedsx D I Axopfx Af Sjit Application Types Turning

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Gisdswxygzepfx Af Set Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.