ES 3550/650

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 Pjdpfjyfrb Njx Af Iegg • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. The price is loaded on truck. Pjdpfx Aeickd Hjf Iogg

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Pgedeyfh I Eepfx Af Ijg Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Pgedpfxoxvingo Af Iog Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Podpfsva H Amjx Af Iogg Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Pgjdpjx Nr Hujfx Af Ijg Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment • 10-way water distributor Psdpfxex D I Egj Af Iogg

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Pjdpfxjwy U E Uj Af Iogg Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" Podpfx Afjx D I Eaj Iegg • Water distributor: 6-way

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN Pedpfx Afox D H Aws Iogg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 864 3 0066, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, displacement volume: 2,801 cm³, injection pressure: 1,832 bar, injection weight: 2,011 g, mold height (min.): 500 mm, ejector force: 138,000 N, ejector stroke: 350 mm, opening stroke: 1,030 mm, plate length: 1,620 mm, plate width: 1,500 mm, total length: 10,600 mm, total width: 2,700 mm, total height: 2,700 mm, overall weight: 33,500 kg, heating capacity: 42.6 kW (57.92 HP), pressure: 190 bar, pump power: 412,000 W, power: 149 kW (202.58 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 329 A, Equipment: documentation/manual, Model: 800/1120–5200 Machine: Demag Ergotech System Type: Injection moulding machine Year of manufacture: 2005 Clamping force: 8000 kN Locking force: 8800 kN Opening stroke: 1030 mm Mould height min./max.: 500 / 1050 mm Platen size (H × V): 1620 × 1500 mm Clear tie bar spacing: 1120 × 1000 mm Max. mould weight: 10,800 kg Ejector stroke: 350 mm Ejector force: 138 kN Ejector retraction force: 58 kN Screw diameter (average): 95 mm Shot volume: 2801 cm³ Injection pressure: 1832 bar Shot weight (PS): 2011 g Pedpfoxa D Uvjx Af Isgg Installed barrel heating: 42.6 kW Electric screw drive: 51 kW Oil tank capacity: 1300 l Pump output: 412 l/min Pump unit: 133 kW Installed total power: 133–149 kW Pressure: 190 bar Net weight (without oil fill): 33,500 kg Overall dimensions (L × W × H): 10.6 × 2.7 × 2.7 m Total weight clamping/injection unit: 7500 kg Continuous sound pressure level: 70 dB(A) Connection: 3 × 400 V, 50 Hz, 329 A

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Pgedpfx Asx H Awljf Ijg Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock Podpfx Aovygh Nsf Ijgg

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Pgsdpfx Afjub S R He Ieg Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Podpfxsvxh Iuo Af Isgg Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock