Stand drill MK2

Flott SB 15

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm Fedpfxohx E T Hj Al Uegh -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK Fedpjvxpp Hefx Al Ujgh arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: good (used), Year of construction: 1989, Offered from an insolvency sale is a ready-to-use thread drilling machine. Manufacturer: Flott Model: SB 15 GL Year of manufacture: 1989 Machine No.: 34177063 Technical data: Cutting capacity: M2-M12 Arbor: MK 2 Quill stroke: 80mm Overhang: 200mm Chuck: Bilz WFP 1 + inserts Drill chuck: Röhm 0-10mm Foot switch Digital display for quill stroke Single-cycle operation Emergency stop Spindle speeds: 80-3150 rpm Fgjdpfx Alefm S Nao Ueh 380 Volt Motor power: 0.75 kW Max. distance between table and arbor: 380mm Overall height: approx. 1700mm Accessories: 8 pcs. lead screws – pitches: 1.5 – 1.25 – 1.75 – 0.8 – 0.7 – 0.5 – 0.45 – 1.0 Operating manual Weight: approx. 200 kg

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating Fjdpfxjvmz Idj Al Uogh We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Fgjdpfx Aljir Aihj Ueh Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: used, Year of construction: 1968, Technical details: Fjdpfxjvpfzyj Al Uogh bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: new, Bernardo BM 32 SB pillar drilling machine Maximum drilling capacity: 32 mm Drill chuck: 1 - 16 mm / B 18 Fgodpfod Tcchjx Al Uoh Morse taper: MK 4 Spindle speed: (12) 150 - 2450 rpm Overhang: 255 mm Swiveling drilling table: 360° Distance spindle / table, max.: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Work surface of base plate: 380 x 335 mm Motor output: S1 100% 1.1 kW / 400 V Motor input: S6 40% 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Fgedpfx Asv S Iqcol Ujh total power requirement 4 kW

Condition: new, Year of construction: 2026, CORMAK Z5020 Vario 230V Column Drill Press The CORMAK Z5020 Vario 230V column drill press is a modern metal drilling machine designed for professional workshop and industrial applications. Thanks to its stepless speed adjustment, wide machining capabilities, and rigid construction, it is perfectly suited for demanding drilling operations. Main advantages of the machine Stepless spindle speed adjustment from 180–2000 rpm – allows precise adaptation of drilling parameters to the type of material being processed. Solid 80 mm diameter column – high rigidity ensures stability during drilling operations. Tilting worktable from -45° to +45° – increases flexibility when machining workpieces at an angle. Drilling depth stop with scale – ensures repeatable and accurate hole depths. Built-in LED lamp – improves visibility of the working area. T-slots in the table and base – enable secure mounting of machine vices and fixtures. Construction and technology Fedpfxewnca As Al Uegh The CORMAK Z5020 Vario column drill press is manufactured using durable cast iron components, significantly increasing its service life and resistance to vibrations. The spindle with an MK3 taper and 150 mm stroke enables deep-hole drilling. The belt-driven transmission ensures reliable and quiet operation. The adjustable worktable, together with 600 mm height adjustment range, allows machining of workpieces with various dimensions. Precision and work efficiency The 1100 W motor (230 V / 50 Hz) combined with stepless spindle speed control enables efficient machining of a wide range of metal materials. Precise feed control and ergonomic operation ensure operator comfort even during extended working periods. With a maximum drilling capacity of 25 mm, the machine is a highly versatile solution for many applications. Applications The Z5020 Vario 230V metal column drill press is ideal for: locksmith workshops, manufacturing plants, maintenance departments, technical schools and training centers. Standard equipment LED work light Drilling depth stop Tilting worktable with T-slots Base with T-slots Stepless spindle speed adjustment Technical specifications Parameter Value Maximum drilling diameter 25 mm Maximum chuck capacity 16 mm Spindle axis to column distance 215 mm Spindle taper MK3 Spindle stroke 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gear transmission Yes Base dimensions 580 × 415 mm Table dimensions 356 × 356 mm Overall height 1710 mm Spindle speed range 180–2000 rpm Table height adjustment range 600 mm Transport dimensions 1510 × 690 × 256 mm Weight 95 kg

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t Fodpfx Ajrxg S Tsl Uogh