Vertical machining center

Hedelius BC 80

Condition: good (used), Year of construction: 1999, Used machining centers from Hedelius Type: BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 tool holder Heidenhain CNC control with Siemens motors/servo Excluding tools/workpiece clamping on the table Excluding mist extraction system Iodpfey U Iviex Ap Djbc Prepared for a 4th axis (4th axis not included) Year of manufacture: 1999 The machine is available immediately and can be inspected while powered on.

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m Ijdjunt Iuepfx Ap Dobc

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. The drives were functioning without any issues; however, the spindle makes noise at higher speeds. Ibsdpfxozx Ecxe Ap Doc As we need the space for our assembly operations, we are offering the machine for sale. Our asking price, ex works, is 6,000.00 Euros.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1329, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: TNC426/430, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, number of spindles: 1, number of slots in tool magazine: 29, Equipment: chip conveyor, documentation/manual, CNC Machining Center HEDELIUS BC 80 HEDELIUS BC 80 CNC machining center with HEIDENHAIN TNC 430 control. The machine is equipped with a powerful Siemens drive system and offers large travel ranges for machining medium to large-sized workpieces. The control supports multi-axis machining and features tool management, probe functions, and tool measurement. Technical data Manufacturer: HEDELIUS Model: BC 80 Control: HEIDENHAIN TNC 430 Axes: X / Y / Z as well as rotary axes A and B (5-axis configuration) Travel range X: approx. 1,700 mm Travel range Y: approx. 800 mm Travel range Z: approx. 750 mm Rapid traverse: up to 30 m/min in the linear axes Max. spindle speed: 5,000 rpm Min. spindle speed: approx. 25 rpm Spindle motor: Siemens 1PH7137-2NG0 Tool magazine: approx. 29 tool positions Probe available (infrared probing system) Tool measurement available Ijdpozvf Agofx Ap Djbc Electronic handwheel HR410 available Equipment HEIDENHAIN TNC 430 CNC control Tool magazine Tool measurement Workpiece probe 3D ROTATION / Swivel machining Siemens servo and spindle drives Electronic handwheel Coolant system Condition Used Functionality: can be inspected by arrangement Sale in the current condition Delivery conditions Price: €39,500 net, negotiable Incoterm: FCA Dismantling and transport by the buyer Overhead crane can be made available for dismantling and loading after consultation.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. Ijdpfx Apjvx N She Dsbc The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Ibedpfoxa Hl Djx Ap Dec Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Iedpfx Apjy Enzae Djbc Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Iedpfx Aotx Dn Uop Djbc

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Ibjdpfx Apey Hvp Io Djc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Ibsdpfx Aev Sdc Usp Djc