Punching automaton - transfer press

Helmerding KDH 500/3100/2

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Bjdpfxei El Uce Afxell

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate Bljdpeyn Emqsfx Afxjl -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t Blodslp Uz Ropfx Afxel dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 2017, operating hours: 30 h, condition: as good as new (ex-display), Strip thickness max. 4 mm Strip width 300 mm Repeat accuracy +/- 0.05 mm NC drive with compact control unit Bledpfsb Nbglox Afxjl Feed force 3000 N (300 kg) Strip clamping pressure max. 1.2 tons

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, PERO used parts washing machine Blodjyb St Ropfx Afxel

Condition: used, Year of construction: 1996, machine/vehicle number: 90.293/1, material width:75 mm total power requirement:1,5 kW Bedpfx Afjcxxpnexsll dimensions of the machine ca.:1,90 x 1,15 x 1,25 m

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Bljdsgbl Aaspfx Afxel Leveler was dismantled, checked and then repainted

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Bljdpfx Afoguvtlsxel Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, pressure 160 t distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm Bjdpfx Afstqm Dgsxjll total power requirement 11 kW weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m - safe for hand inlay work - Conversion to West - Photoelectric barrier

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm Bodjlp U R Djpfx Afxjll table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm