Welding Unit

KEMPPI Pro MIG 500

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Hsdpfowtctmjx Afusu Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. Hsdpfxegwlrdj Afuju All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Hjdpfsw Rm Saox Afuju Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: good (used), Rotary vane booster pump Manufacturer: Leybold Type: RUVAC RA 9001 Condition: Overhauled and available as tested and serviced Includes: New paint job, motor relubrication, electrical inspection Hjdpfx Aed Hh Nvofusu Warranty: up to 12 months Delivery time: in stock

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Technical data: - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation Hedpfx Aop H Tu Ejfusu - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable - pressure reducer - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz Hodpfx Aofc R D Aofuou -Dimensions: 700/300/H670 mm -Weight: 49 kg

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm Hjdpfx Aszf A Ifjfuju • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: new, Year of construction: 2023, overall weight: 22,500 kg, For sale: 26 Siemens motors, new, from 2023. I will sell the entire lot or individual units. IE3 class. 1 pc. 894718.2 IE3 Motor, 3-phase, 55kW, 4-pole, 400|460V, 50|60Hz, Siemens, 1PC3105-2CB20-0FA0, 04/2023, on EPAL pallet, wrapped in foil. 1 pcs. 894721.1 IE3 Motor, 3-phase, 75kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB03-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 4 pcs. 894726.1 IE3 Motor, 3-phase, 132kW, 4-pole, 400|690V, 50Hz, Siemens, 1PC3005-3AB20-0CA0, 06 & 07/2023, on EPAL pallet, wrapped in foil. 2 pcs. 894727.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.1 IE3 Motor, 3-phase, 200kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894729.3 IE3 Motor, 3-phase, 250kW, 4-pole, 400|460V, 50Hz/60Hz, Siemens, 1PC4105-3AB03-4FA1, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.11000 IE3 Motor, 3-phase, 160kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 3 pcs. 895025.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 2 pcs. 895025.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11500 IE3 Motor, 3-phase, 110kW, 4-pole, 575V, 60Hz, Siemens, 1PC3105-3AB00-0CA1, 05/2023, on EPAL pallet, wrapped in foil. Hsdpfxjv Iymue Afueu 1 pc. 895136.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895631.00020 IE3 Motor, 3-phase, 132kW, 2-pole, 660V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894719.11080 IE3 Motor, 3-phase, 75kW, 2-pole, 400V, 50Hz, Siemens, 6SL3203-0CE21-8AA0, 03/2023.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Hsdpfjy Ulziox Afusu -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster Hjdpfx Afjyy Hgqeuou :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence