Double column press / Straight side press

Komatsu E2G 400

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Pgjdpfx Ajwnn Rtoklsp Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration 2 cushion cylinder 2 pads

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Pgodok Dz N Iopfx Aklsp max turning diam 1100mm range of turning diam 460-1250mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm Pedeucdgpopfx Aklsgp BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Pedpfsulwg Nsx Aklogp Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Pgodpjf Rt Ubsfx Aklop

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton Pgsdpfx Aksifkldolsp YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Podpohz Ua Sefx Aklogp

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Pgodpfxex Tft Ae Akljp

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 5000 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change Pgjdpjx Imqlofx Aklop • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning Podpfxjyk Dc Nj Aklsgp • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design