Cut off saw

Krüsi LKSA 83 -6.2

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool. Dsdovgnb Rspfx Agdskg

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Dkedpfjwu Nwhox Agdeg Hopper inlet 2.26 m x 1.65 m

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Dodpfx Aoxpua Ujgdskg Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Dkjdpjt Hw Iijfx Agdog

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 3,100 mm, grinding spindle motor power: 7,500 W, overall weight: 3,200 kg, Grinder for shredder knives, sawmill knives, industrial knives Dsdpfxowvi Shj Agdekg Reform AR31 51, automatic feed by servomotor Tilting magnetic table 3100 mm

Condition: ready for operation (used), With hydraulic pump. Dedpshw E D Sefx Agdskg

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg Djdpfx Agjuz Hmxjdokg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: good (used), Year of construction: 2011, Ruli folding bench 6020 / A Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Dsdpfxsvb Nnhe Agdskg Shipping with forwarding agent.

Condition: used, Year of construction: 2006, sliding table length: 3000 mm cutting width at the fence: 1250 mm cutting width at the cross cut: 3200 mm cutting depth: 120 mm scoring unit: yes height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: Handrad read out sawblade tilting: Digitalanzeige read out cutting height: Digitalanzeige read out fence: Digitalanzeige read out crosscut: Digital saw blade diameter: 400mm sawblade speeds: 4000 / 4800 / 6000 U/min motorpower: 7,5kW suction connection: 80 und 120mm Dodjxgn Rbjpfx Agdjkg machine length: 3500mm machine width: 2200mm weight: 1200kg

Condition: used, Weinig Unimat 23 Technical data Dksdpencc Igofx Agdsg Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized