Clamping Units

Backenverlaengerung

Condition: good (used), Year of construction: 1969, Work table Iaodpeidckfofx Abveu Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall Iaedpfxexn T S Hj Abvju type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Forklift available for loading

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich Iaodsy Dvlqspfx Abveu - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE (VTL) • Table Ø 3,200 mm • Maximum turning diameter Ø 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled RAMs • RAM travel 1,250 mm Iasdpfox Nhm Rjx Abvju • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system • Work light • Refrigerated electrical cabinet

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Isdpfx Aov Nhxzjbvoau Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Iasdpfxewkvw Te Abvju Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or liability

Condition: good (used), Year of construction: 2001, Manufacturer: VDF Wohlenberg Ijdpswrrbwjfx Abveau Type: V-Model Year of manufacture: 2001 Maximum swing 500 mm 3 x adjustable bronze rollers 2 Matching steady rest Specifications Metric US Standard Fixed steady rest Fixed Min. diameter 50 Max. diameter 500 Center height 500 mm Dimensions (estimated) Length 1200 mm Width 800 mm Height 1200 mm Weight 800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations should be assumed. We recommend that you check all important details. Share on

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, HSM - T - DRIVE - CL - R4 - SV - 30/26. Year of manufacture: 2020. Equipped with ContourLine-Classic welding technology as well as V-system. The machine is in continuous operation and fully functional. Capable of welding frames and sashes, as well as frames with threshold. Minimum welding dimension: 490 mm x 497 mm. Maximum welding dimension: 2690 mm x 3100 mm. Welding process is 100% controlled by servomechanism. Programming via touchscreen. High-temperature welding. Quick-change welding foil system. Quick-change pad system. Diagonal or parallel joining process. Individually programmable welding parameters. CE-compliant safety device. Horizontal take-off unit. Iaodpsw U Nlwefx Abvou

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Iajdpfsxvivqjx Abvju Technical data: see photos Location: ex-site Saarland

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: K 240/50 662, turning height: 2,150 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled between 2012 and 2016! 2012: - Digital measuring system (Positip 880) installed - New power clamping band - New selector switches 2015: - Directional clutches on the X-axis replaced - Gibs and nuts on both supports re-adjusted 2016: - All clutches in the main drive re-ground - All bearings in the main drive replaced, including the power supply unit - Drive shaft replaced - Several sets of discs - New spur gear, etc. TECHNICAL DETAILS Turning height: 2,150 mm Swing diameter: 2,200 mm Faceplate diameter: 2,000 mm Max. workpiece weight: 20,000 kg X-axis travel: 1,225 mm Iodpfx Aboyw N Ufsvjau Rapid traverse X-axis: 2 m/min Rapid traverse Z-axis: 2 m/min Spindle speed: 3 – 125 rpm MACHINE DETAILS Number of tool turrets: 1 Total weight: 26,000 kg EQUIPMENT Documentation/Manual