Lathe - cycle-controlled

MONFORTS KNC 6 2000

Condition: used, Year of construction: 2003, Technical details: turning diameter: 630 mm turning length: 2000 mm swing diameter over bed slide: 350 mm upper slide-adjustment: 195 mm bed width: 550 mm spindle diameter in front bearing: 120 mm spindle drive: 17/25 kW spindle bore: 71 mm Kedpfx Aevb Dt Segzjfa spindle turning speed range: 3 - 1800 U/min tailstock-quill taper dia./stroke: 110/210 mm total power requirement: 30 kW dimensions of the machine ca.: 4,9 x 2,1 x 2,0 m weight of the machine ca.: 5 t Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor *

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Brewhouse Stainless steel lauter tun with copper cladding, 1800 liters. Stainless steel mash tun with copper cladding, 1800 liters. Steam generator, stainless steel, 800 liters. Hot water tank, stainless steel, 3600 liters. Leach tank, stainless steel, 397 liters. Kfjdpfx Agewiu Twszoa Stainless steel tank, stainless steel, 1900 liters. Plate heat exchanger: M9 NBN Plate heat exchanger: SIGMA M13 NAL SIEMENS control system 5 centrifugal pumps Storage Total volume: approx. 48,000 liters. 3 x horizontal stainless steel tanks, identical, 1600 liters each, on a frame with casters. 3 x vertical stainless steel tanks, identical, 1600 liters each. 1 x vertical stainless steel tank, stainless steel, 2100 liters. 11 x stainless steel tanks V2A vertical, identical, 2000 lt each. 4 x V2A horizontal stainless steel tanks, on a frame, identical, 1000 lt each. 5 x V2A vertical stainless steel tanks, identical, 1690 lt each.

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Kfsdpfxouuik Sj Agzja Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine Kfedsu Idffopfx Agzja The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Kfsdpfjhvml Iox Agzsa Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Kedpfx Aoiw Dlkegzefa Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: used, mileage: 58,695 km, power: 235 kW (319.51 HP), first registration: 01/1978, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, crane, 1429. GW186970259 Year of manufacture: 1978, vehicle has never been registered, mileage: approx. 58,695 km read (no guarantee) Power: 320 HP Displacement: 12,763 cc Drive type: diesel Own/total weight: 13,190/22,000 kg Seats: 3 in the front Equipment: Crane Palfinger PK7500N V751, year of manufacture 1976: Crane loads: * 730kg at 7.10m * 1180kg at 6m * 1450kg at 5m * 1850kg at 4m * 2450kg at 3m * 3750kg at 2m mounted at the rear Plane ----We are happy to accept your vehicle as payment, Kfedpfx Aged T T Ngjzea financing/leasing also possible without a down payment, subject to errors and prior sale. Do you have any questions? We are happy to advise you!

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Kjdpfjlbmupex Agzjfa

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 128 mm, Centre height 550 mm, distance between centres 6,000 mm, drive power 30 kW, Heidenhain digital display, 3-jaw chuck 500 mm, tailstock, steady rest, faceplate 900 mm, leadscrew nut defective Kodswz Elujpfx Agzofa

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Centre distance: 1000 mm Turning length: 1100 mm Kfsdoxd Diuepfx Agzoa Spindle speeds: 1-2500 rpm / Motor: 20 kW For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.