Used Alzstar 40 for sale (21,917)

Condition: good (used), axle configuration: 3 axles, first registration: 04/2005, suspension: air, color: blue, Year of construction: 2005, Equipment: ABS, Brakes: drum brakes Empty weight: 5.420 kg Carrying capacity: 33.580 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = Hfsdjz Hdwbjpfx An Njn - Air suspension - Extandable - Twist-locks = Remarks = Krone SD 27 / Conatiner chassis / 40 FT / BPW

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, Year of construction: 2019, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – 1st to 2nd axle = 1,410 mm 2nd to 3rd axle = 4,530 mm Hfsdpfxez Hy Ehj An Non 3rd to 4th axle = 1,410 mm = Further Information = Suspension: Leaf spring suspension Front axle 1: Steered Front axle 2: Steered Unladen weight: 8,200 kg Payload: 31,800 kg Gross vehicle weight: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Hsdpfx Anozlkgce Nsfn Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 Hfodpfx Ajz Ekfvjn Njn EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Hfodpfjz Nyd Djx An Njn Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: 40 nozzles for consistent adhesive application Hedpevphziefx An Njfn

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft Hfodpfxezyf Uqs An Njn - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, functionality: fully functional, ► 40-foot HIGH CUBE (HC), used, sea transport-ready ◄ ✍️ Dimensions External: 12,192 x 2,438 x 2,896 mm (LxWxH) Internal: 12,032 x 2,352 x 2,698 mm (LxWxH) Door opening: 2,340 x 2,585 mm (WxH) ⚙️ Features: Wind and watertight Cargo worthy (suitable for international transport) Refurbished and ready for immediate use 5-year valid CSC certificate (comparable to vehicle inspection) ⤴️ Additional services on request: Hodpsy Ihn Sofx An Njfn Custom modifications such as conversions, repainting, and much more available ⚡️ Fast delivery possible, including unloading Please provide postcode for a non-binding offer _____ ✅ We are happy to provide you with a tailor-made quotation.

Condition: new, Year of construction: 2026, ✅ You always get dealer prices from us! ✅ NEW / One Way sea containers For sale are NEW sea containers / YEAR OF CONSTRUCTION 2024 One Way / One sea voyage old Incl. a lock box - security system to protect valuable goods in the container from unauthorized access RAL 5010 gentian blue RAL 5013 cobalt blue RAL 7015 slate gray RAL 7016 anthracite RAL 7035 light gray RAL 7042 traffic gray RAL 7030 stone gray RAL 3009 oxide red RAL 9010 pure white RAL 9005 jet black - Wooden floor - Delivery and unloading possible for an extra charge EXTRASERVICES - completely personal and individual for you! On request... - we will be happy to make you a customized offer - we deliver containers quickly and easily nationwide and even worldwide - we professionally convert containers for you Miscellaneous: - External dimensions (LxWxH): 12,192 x 2,438 x 2,896 mm - Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm - Door opening (WxH): 2,340 x 2,585 mm Hfsdpfxorgp Sws An Nen - Volume: 76m³ - Tare weight: 3,660 kg - Payload: up to max. 26,820kg PLEASE CONTACT US

Condition: good (used), Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change turning tool holder: 16 B 1 -Shooting dimensions: see photos -Clamping height: 40 mm -Support length: 200 mm -Quantity: 2x holders available -Price per piece -Dimensions: 200/65/H150 mm -Weight: 3.6 kg/piece Hfedpfxepk Iqhs An Njn

Condition: new, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 120 mm spindle taper MT 4 MK table: 500 x 460 mm column diameter 115 mm Hfsdpfxeupxi Ho An Njn turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: used, functionality: fully functional, machine/vehicle number: 2482758, Year of construction: 2021, load capacity: 5,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,940 mm, power: 54.4 kW (73.96 HP), motor manufacturer: Kohler, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 55 mm, turning radius (inner): 2,830 mm, front tire size: 300x15, rear tire size: 700-12, overall weight: 7,150 kg, total height: 2,940 mm, total length: 3,000 mm, total width: 1,480 mm, color: orange, Equipment: cabin, pallet forks, Technical data - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded: 10,780/1,360 kg - Axle load unloaded: 3,300/4,060 kg - Track width: 1,180 mm - Track width: 1,190 mm - Tilt of mast/fork carriage α/β (degrees): 6/12 Hfodpfx Aoyqzlnon Nen - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for 1000 x 1200 mm pallets, crosswise: 4,597 mm - Aisle width for 800 x 1200 mm pallets, lengthwise: 4,797 mm - Turning radius: 2,830 mm - Lift height: 3.00 m - Minimum turning point distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s - Traction force loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20/20 % - Service brake: mechanical/hydraulic - Rated RPM: 2,200 l/min - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission level according to EU Regulation 2016/1628 Stage III a - Onboard voltage: 12 V - Drive unit type: torque converter - Operating pressure for attachments: 200 bar - Oil flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Tow coupling type: DIN 15170 pin

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Hsdpfx Anoyn Ucbe Nofn Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension Hjdpjx Efznefx An Nefn - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor Hfjdswyu Trspfx An Njn Machine functions: - Product is fed to infeed system, consisting of an elevator; - The elevator is controlled by the infeed sensor of the multihead weigher; - The multihead weighing machine discharges weighed out portions to Distributor / Depositor; - Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer; This line consist of the following equipment:  - SS Stair; - Infeed conveyor belt; - SS Platform; - Cabinplant MHW 40-24 Multihead Weigher; - Cabinplant Depositor / Distributor; Cabinplant MHW 40-24 Multihead Weigher Manufacturer: Cabinplant Model: MHW 40-24 Year: 2013 Capacity: 150-500 gram Weighings/min.: Up to 120 Pan Size: 4 liter Number of pans: 24 Machine Dimensions LxWxH: 2.200x2.125x2.500 mm Machine Weight: 1.100 kg. Multihead Weigher is fully checked and serviced by Cabinplant Cabinplant Depositor / Distributor Manufacturer: Cabinplant Model: Sausage Depositor Year: 2014 Capacity: 150-500 gram Weighings/min.: Up to 120 Filling Capacity: 2x5 movable pitch

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Features: - Lockable main switch - Mushroom push button for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor with thermal protection contact - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Motor insulation class “F” (155°) - Connection cable (without plug, cable length 2 m) - Spindle guard with electrical protection Hfjdjxaa Ufspfx An Nen - DD textured paint finish in signal white RAL9003, PANTONE 7545c, black

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes Hsdpfxjxabnte An Njfn * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Hfjdpfx Ansxabq Io Nsn Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm Hfodpoxabwzsfx An Nsn morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Hfodexab Tcopfx An Nsn - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min voltage 400 / 50 Hz Volt table: 300 x 240 mm Hfjdpfx Asxaay Usn Njn column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: used, bore capacity in steel (diameter) 40 mm Hsdpfxjxddtys An Njfn throat 380 mm bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm Hfjdpfx Anoxdr Skj Nen - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: used, Year of construction: 2016, operating hours: 13,606 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: gas, construction height: 2,920 mm, gearing type: automatic, Equipment: cabin, Linde H 40 T - Series 394 - Manufactured in Germany. Used in Germany. Technically and visually in excellent condition and ready for immediate use. Serviced. New accident prevention inspection available upon request. A gas cylinder can be installed upon delivery upon request. 13,606 operating hours Full cab Heating Air conditioning 2-pedal operation 2 front work lights 2 rear work lights Hfedpfx Asv Tau Njn Nen Standard mast with 150 mm free lift Cross lever joystick operation Lift height: 4,100 mm Overall height: 2,920 mm Free lift: 150 mm Forks 1,200 x 125 x 50 mm or alternatively for an additional charge Forks 1,400 - 1,600 - 1,800 - 2,000 - 2,200 - 2,400 mm 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 70% Rear tires 70% Technical specifications - errors excepted. Sale without warranty.

Condition: used, Year of construction: 2011, fuel type: electric, Weights Hedpfx Aev Tii Asn Nefn Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm Dimensions of cargo space: 653 x 150 x 198 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 691 m Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: Z40/23N RJ Year of build: 2011 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Swivel range: 355° Max. climbing capacity: 30 % Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available