Used Barbed Wire Machine for sale (64,873)

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Bwedpfxew S Tygj Afpsh

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Bjdpfx Afsw Sxx Ijpjwh

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Bedjha U I Dspfx Afpjwh Please ask if you are interested !

Year of construction: 1985, condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Bsdpfxsdy Dw Ej Afpjwh Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Year of construction: 1988, condition: good (used), AGIE AGIECUT 100 type AC100/87 serie 122 Machine tool AGIECUT 100 Generator - AGIEPLUS-MM Machine control - AGIEMATIC -C Dielectric aggregate – DA-15/AF Working table; length 560 mm , width 445 mm Max. dimensions of work piece; length 810 mm, width 580 mm, height 250 mm Table load max; 200 kg Height of work support over ground; 800 mm Longitudinal traverse (X-axis); 300 mm Cross traverse (Y-axis); 200 mm Rapid traverse; 30 mm/min Diameter of electrode wire; from 0.03 mm up to 0.30 mm Total power required; 15,7 kVA Weight total installation approx.; 2700 kg Overall dimensions machine; Length 1700 mm Bwsdpfxedy Dvxo Afpjh Width 1550 mm Height 2130 mm

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bsdpor Nfvmefx Afpjwh Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Bwodpfxomqk Tpe Afpoh Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Bwsdpsn Ut A Ssfx Afpoh Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Bwodpfx Afsv Iazlspoh Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Many spare parts and wear parts

Condition: ready for operation (used), Year of construction: 2007, operating hours: 33,995 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, Wire EDM machine has been recently serviced and cleaned! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 550 mm Travel Z-axis: 525 mm Bwsdjwzhqmopfx Afpsh Workpiece dimensions Workpiece height: max. 510 mm Workpiece width: max. 1,000 mm Workpiece length: max. 1,300 mm MACHINE DETAILS Type of input power: Three-phase current Total weight: 6,800 kg Operating hours Power-on hours: 108,824 h Working hours: 33,995 h

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 2,350 mm, total length: 2,500 mm, total width: 2,300 mm, workpiece height (max.): 260 mm, workpiece width (max.): 650 mm, workpiece length (max.): 940 mm, overall weight: 6,000 kg, CNC wire cutting machine in very good condition. It has been thoroughly inspected by a Makino service technician. The machine has been cleaned, and all pumps have been checked, newly mounted, and sealed. Bjdpfx Aswww Nqjfpjwh

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS Bodpjnh R Nkofx Afpewh total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Bwjdpfoxnpmgox Afpjh

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Bwodoxnpkxopfx Afpeh

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ Bjdpjwmnhvsfx Afpewh EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete Bwodpfx Aowz Iuxefpeh - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Year of construction: 2017, condition: new, functionality: fully functional, 2 TIP TIG WIG 500i ACDC/HW 160i Extreme case version units, complete with hot wire power source, water cooling, wire feeder, and each with 1-1 TIP TIG DV Extreme case version remote control units. TIP TIG WIG 500i ACDC HW 160i Extreme case version intermediate cable package. TIP TIG remote control (TIP TIG manual DV and welding current control 5-500A) TIP TIG remote control cable 5m TIP TIG remote control storage box TIP TIG transport frame, Extreme case, complete TIP TIG ground cable 500A 10m TIP TIG cable package HW TW 18 SC 4m, Teflon core, orange TIP TIG spare parts box L large, HD / KD 18 SC, gas lens Jumbo TIP TIG adapter DIX KAB 70/95 (all unused) 2 TIP TIG handheld hot wire welding systems complete with wire feeder and each with 1-1 FRONIUS Magic Wave 5000 Job G/F as a water-cooled power source TIP TIG High Speed Edition Handheld HD/KD (hot wire/cooling wire) TIP TIG HD module TIP TIG connection cable 1.4 m TIP TIG intermediate hose package FRONIUS, 3 m TIP TIG hose package HD, interchangeable torch 18 HC, 7 m, orange Teflon core TIP TIG spare parts box large, interchangeable torch 18 HC TIP TIG adapter DIX KAB 70/95 (all unused) 4 TIP TRIMMER combi 230V 50/60Hz (demonstration models) Bjdpfxswa S Tis Afpjwh Total new price: €98,358.49 net Used price: €49,180.00 net

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM Bwsdpfx Afsxbm Uzopoh 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,088 h, functionality: fully functional, machine/vehicle number: 073C1923, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, overall weight: 3,100 kg, TECHNICAL DETAILS Bedow Nf R Espfx Afpswh Travel Paths X-axis travel: 550 mm Y-axis travel: 370 mm Z-axis travel: 410 mm U-axis travel: 120 mm V-axis travel: 120 mm Maximum workpiece weight: 1,000 kg MACHINE DETAILS Weight: 3,100 kg Machine hours: 24,088 h

Condition: not inspected (used), Year of construction: 1999, functionality: limited functionality, .We sell EDM Sodick Matra (submersible). Year 1999. Bwjdpfxowh Upvo Afpoh

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz Bwjdpfxowr Acle Afpeh EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: used, Year of construction: 2000, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,300 mm, total width: 2,200 mm, overall weight: 3,600 kg, For sale Agiecut Challenge 2 spark eraser. Bwjdpsvdyhqsfx Afpoh Specifications: Range of motion: X: 350 mm Y: 250 mm Z: 250 mm Controller: Agie Maximum workpiece weight: 250 kg Year of manufacture: 2000 Dimensions: Machine weight: 3600 kg Machine dimensions (H, W, D):2300x2200x2200

Condition: good (used), Year of construction: 2005, Straight and cut machine Brand - RAVNI ( France ) Min/Max wire diam. - 4- 10 mm Bwjdpfx Aopxnv Dsfpjh Max cutting length - 6 meters Construction year - 2005.

Condition: used, functionality: fully functional, Wire drawing machine COMPAC – model TR560 – 7 steps of drawing Bwodpfx Afew Ephnepoh Raw material : low carbon hot rolled wire rod Input: from fi 5,5 mm output: 1,8 mm on the last step Speed: cca 15 m/s Diameter of blocks 560 mm (5 pcs with ceramics) Engine power - 41 KW Electronics: SANTERMO matrix cassette No. 1 rotating on a chain, others fixed with water for cooling 2 cassettes for washing the wire +1 rotating cassette (spare) +1 block (reserve) Complete with two mandrels for unwinding. We have complete documentation for the machine. The machines are in good condition, we used them for production and dismantled them at the end of last year.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF Bwedpfx Ajwyaywofpoh