Used Barrel for sale (253)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Blsdpfx Aed N Erpefted Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Blodperdyb Aofx Afted Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm Bodpfx Afjya Eldetsld CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Bedpfx Asi Riwqeftsld Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Available immediately!

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) Blsdpsxxrr Tjfx Afted - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: used, functionality: fully functional, empty load weight: 6,620 kg, maximum load weight: 29,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 90 %, color: grey, Year of construction: 2024, Equipment: ABS, Object number #30713 Coil trough 7,200 mm BPW axles Disc brakes Lifting axle Tyres 385/65 R 22.5 Aluminium rims Body inside dimensions: 13,620 x 2,480 x 2,700 mm (side loading opening 2,630 mm) Portal doors double internal locking rods Sliding curtain Bjdpfox Tt Sgjx Aftold Sliding roof Load securing certificate EN 12642 XL Load securing certificate DCE 9.5 Drinks certificate incl. barrel packaging Vario-Fixx steel chassis outer frame 13 pairs of lashing rings 8 pairs of 80x80 mm stake pockets Wabco Smart Board Forklift accessible Raise/lower function ABS/EBS Work lights Toolbox SAF landing legs Interior lighting RSAB (Roof Safety Airbag) Leasing or financing available on request!!

Condition: new, Year of construction: 2008, Cylinder barrel: 3201-303-35-- D60 LD20 Screw: 0463-08D60 LD20 G1.2 WS8 2781089 Aggregate size 1300 Year of manufacture 2008 Bsdpfx Afsd A Nq Setjld New

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11322 - 6759.470QC6, load capacity: 15 kg, arm reach: 1,700 mm, controller manufacturer: CLOOS, controller model: QIROX C, teach pendant manufacturer: CLOOS, input voltage: 400 V, input current: 44 A, type of input current: AC, • Year 2013 • Ready to weld Aluminium and Steel • Model QRC 350 QIROX • Control cabinet QIROX C – QRC 350 • Linear track of 15 m • Laser camera POWER CAM of SERVO MOTOR CANADA • Touch sensor Quinto • Arc sensor • Wire Barrel • Wire drive unit CK 118 R K CDD • Welding torch MRW 500-35°-78/273 Bljdpfx Afswcyffsted • CDD CLOOS DUO DRIVE • Welding machine QINEO PULSE 450 GLC 403 Quinto II with external cooling (Hot Countries) • Torch clean CMR 7 C DA with wire cutter

Condition: good (used), Used stainless steel barrel Item number: 10834 Last use: Pharma Volume: 300 Liter Type: Vertical Material (wetted parts): 14404 / AISI 316 Design: Single-walled Blsdpfjt R R E Njx Aftsd Operating pressure according to type plate: ATM Tank dimensions: Inner diameter: 710mm Cylindrical height: 770mm Total width: 860mm Total height: 900mm Height of the feet: 95mm materials: Interior: 14404 / AISI 316 External parts: 14301 / AISI 304 Equipment: Nameplate: no Clamping ring base on 4 castors

Condition: good (used), Used stainless steel barrel Item number: 10830 Last use: Pharma Volume: 400 liters Type: Vertical Material (wetted parts): 14301 / AISI 304 Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Inner diameter: 700mm Cylindrical height: 1000mm Total width: 740mm Total height: 1040mm materials: Interior: 14301 / AISI 304 Bledpjt R R H Tsfx Aftsd External parts: 14301 / AISI 304 Equipment: Nameplate: no Clamping ring

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Blodpfex Dkmgox Afted Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Bedpfx Afex Dip Totold Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, - Conforms to CE standards - It is a machine that can perform door, sash, arm barrel and triple drilling of aluminum and PVC profiles. - CNC control 10" touch screen - 3 independent axes (AXIS) - Cooling system for aluminum profiles Bedpfjra Nybjx Aftold - Metering system with right and left arm and rest - Precise operation thanks to linear slide system - Ability to adjust the speed settings of all processes - Easy switching from touch screen to Aluminum Pvc profile and automatic change of speed settings - Unlimited memory capacity - Automatic protection cover for safety - Servo motor system in X, Y, Z axener

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction Description: Trucks with Trailer (MAN, Beverage Body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (truck + central axle trailer) and is primarily used for beverage transport. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Spacious sleeper cab, suitable for long-distance haulage * Interior features: * Multifunction steering wheel with integrated controls * Clear dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, bunk area behind seats 2. Body (Truck + Trailer) * Body type: Beverage body/box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), ideal for daylight use during loading and unloading * Interior floor: Durable wooden floor, heavy-duty, suitable for roll cages, pallet jacks, or pallets 3. Trailer * Design: Central axle trailer, also with beverage body * Axles: 2 axles Bsdpfxex R Rcws Aftsld 4. Application * Mainly for transporting beverages in crates and barrels * Large loading volume due to the combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Generous cargo space with robust floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN Bledpjx Thzpofx Aftjd - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. Bljdjgwcfzjpfx Aftjd 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in 3 USB ports. Plasticizing unit: Complete abrasion-resistant plasticizing unit for thermoplastics, screw diameter 120 mm, with non-return valve and open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Mold height (min–max): 600 – 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Blodpfx Aox Tgbhsfted Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and hydraulic equipment Pump motor rated power: 132 kW Installed heater capacity: 82 kW Number of barrel heating zones: 7 Number of dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel Bedjt Nfaropfx Aftsld • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Bedpfx Afoxykcgetsld Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: excellent (used), We are offering an unused single-screw extruder from stock. The unit was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory, material development, small batch production, or custom extrusion applications. — Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 Bedpfx Afexxim Istjld • Condition: unused / test runs only • Drive: 3 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Currently not connected, but can be integrated without issue • Die: Strand die can be customized or newly manufactured upon request • Design: robust laboratory/pilot plant construction • Mobile: base plate with heavy-duty castors – easy to position — Special Features • Very compact design • Ideal for filament, profiles, laboratory tests and material trials • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Bedpfjh U Rznjx Aftold Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Blodpfsx I Dc Eex Aftjd Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, total width: 2,550 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGM 26.320 6x2/4 Beverage Truck | Wingliner Beverage Body | Dhollandia Side Loader | CODE XL * MAN D08 engine with 320 HP * Euro 6e emissions standard * MAN TipMatic automatic transmission * Cruise control with adaptive distance control (ACC Stop & Go) * Multi-stage MAN EVBec engine brake * Hill-start assist & anti-roll-away function * Rear axle differential lock * Axle ratio optimized for distribution transport * Rear air suspension * Lift and steerable axle (highly maneuverable) * Electronic braking system (EBS) with ABS * Disc brakes all around * Digital axle load display * Tire pressure monitoring system (TPMS) * Rockinger trailer coupling (high traction) * Gross train weight up to 33,000 kg * Emergency brake assist (EBA) * Lane departure warning * Lane change & turn assist * Traffic sign recognition * Driver attention assistant * Reverse warning (acoustic) * LED rear lights * LED side marker lights * Automatic hazard warning at emergency braking * MAN CC cab (compact, excellent visibility) * Air-suspended premium driver’s seat with seat heating * Multifunction leather steering wheel * Air conditioning (Climatronic) * Digital instrument cluster (12.3 inch) * MAN Media System Professional with navigation * Smartphone integration * Digital mirrors (MAN OptiView) * Sun visor & sun blind * Refrigerator in cab * Electric windows * Central locking with remote control * Rain sensor & light sensor * LED headlights incl. turning light * 12V & 24V sockets in cab * Prepared for LED work lights * Main battery switch * Rear-view camera pre-installed ----Wingliner Beverage Body (Classic) The Wingliner Classic beverage body allows for particularly fast and convenient loading and unloading from both sides of the vehicle. This significantly reduces downtime and optimizes workflows. Sidewalls open on both sides: * Loading length approx. 6,800 mm * Loading height approx. 2,100 mm * Sandwich panel roof * Robust, reinforced composite sidewalls * Hydraulically locked upper rails * Remote control incl. Bluetooth * Excellent accessibility for forklifts and side loading ----Tail Lift / Dhollandia Side Loader * Specially designed for the beverage and distribution sector * High load capacity * VDI-certified * Suitable for pallets, roll containers, and barrel goods ----Load Securing CODE XL Certification according to DIN EN 12642 * Legally compliant load securing without additional straps * Meets the highest requirements for commercial transport * Especially suitable for beverages and heavy palletized goods ----Typical Areas of Application in Beverage Trade * Breweries * Wholesalers * Logistics and distribution transport * Pallet and barrel logistics ----Your Advantages * Dual-sided loading saves time and reduces costs * High-quality Wingliner beverage body * Dhollandia side loader for heavy loads * CODE XL certified * Exceptional maneuverability despite 26 t gross weight Bljdpfx Ajx Nb Hkeftjd * Ideal for urban and overland transport We are happy to provide further information upon request.

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, total width: 2,550 mm, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGM 26.320 6x2/4 Beverage Truck | Wingliner Beverage Body | Dhollandia Sidelifter | CODE XL * MAN D08 engine with 320 HP * Euro 6e emission standard * MAN TipMatic automated transmission * Cruise control with adaptive distance control (ACC Stop & Go) * MAN EVBec engine brake (multistage) * Hill start assist & roll-away prevention * Rear axle differential lock * Axle ratio optimized for distribution transport * Rear air suspension * Lift and steer axle (highly maneuverable) * Electronic braking system (EBS) with ABS * Disc brakes on all axles * Digital axle load indicator * Tire pressure monitoring system (TPMS) * Rockinger trailer coupling (high towing capacity) * Gross combination weight up to 33,000 kg * Emergency brake assist (EBA) * Lane departure warning * Lane change & turning assistant * Traffic sign recognition * Driver attention warning * Acoustic reversing warning * LED rear lights * LED side marker lights * Automatic hazard warning in emergency braking * MAN CC cab (compact, clear overview) * Air-suspended premium driver’s seat with seat heating * Multifunction leather steering wheel Bodpfex Nb Hdox Aftold * Air conditioning (Climatronic) * Digital instrument cluster (12.3 inch) * MAN Professional Media System with navigation * Smartphone integration * Digital mirrors (MAN OptiView) * Sun visor & sun blind * Refrigerator in driver’s cab * Electric windows * Central locking with remote control * Rain and light sensor * LED front headlights incl. cornering light * 12V & 24V sockets in driver’s cab * Prepared for LED work lights * Main battery switch * Rear-view camera pre-installation ----Wingliner Beverage Body (Classic) The Wingliner Classic beverage body enables particularly fast and convenient loading and unloading from both sides of the vehicle. This significantly reduces downtime and optimizes workflows. Side walls open on both sides * Loading length approx. 6,800 mm * Loading height approx. 2,100 mm * Sandwich panel roof * Robust, reinforced composite side walls * Hydraulically locked upper belts * Remote control incl. Bluetooth * Excellent accessibility for forklifts and side loading ----Tail lift / Sidelifter Dhollandia Sidelifter * Especially designed for beverage and distribution transport * High load capacity * VDI-certified * Suitable for pallets, roll containers, and barrel goods ----Load Securing CODE XL Certification according to DIN EN 12642 * Legally compliant load securing without additional lashing straps * Meets the highest requirements in commercial transport * Especially suitable for beverages and heavy pallet goods ----Typical Areas of Application Beverage Trade * Breweries * Wholesale * Logistics and distribution transport * Pallet and barrel logistics ----Your Benefits Loading from both sides saves time and costs * High-quality Wingliner beverage body * Dhollandia sidelifter for heavy loads * CODE XL certified * Excellent maneuverability despite 26 t gross weight * Ideal for urban and long-distance transport For further information, we are happy to assist you.

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Bodpfxowkg Txo Afteld Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg