Used Barrel for sale (234)

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins Guodpszvn Daefx Aiheh - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: Gsdpfx Aioymn Inshjuh – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Guedezhm Ihepfx Aihoh Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 260 h, clamping force: 550 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12" color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details. General • Operating Hours: Approx. 260 h • Machine Condition: Working Injection Unit • Screw Diameter: 25 mm • Screw Type: Nitrided Thermoplastic Screw • Barrel: Bimetallic • Nozzle Radius: 10 mm • Nozzle Bore Diameter: 2.5 mm • Stainless Steel Material Hopper • Manually Sliding Material Hopper • Feed Throat Temperature Control • Dosing Signal Output • Ceramic Heater Bands • Hot Runner Controller: 8 Zones • Temperature Control Channels: 8 Clamping Unit • Centering Ring Diameter: 100 mm • Mounting Plate Threads: M16 • Euromap Standard: Euromap 2 Guodpfjznu Ddjx Aihsh • 3-Stage Central Ejector • Central Lubrication for Mould Height Adjustment • Pneumatic Ejector: Included • Pneumatic Core Pull Control: 1 • Core Pull Connector: Euromap 13 (HAN 16A) • Water Circuits: 6 Control & Electrical • Control Unit Brand: KEBA • Display: 12" Color TFT Touchscreen • Power Supply: 400 V • Frequency: 50 Hz • Main Switch: 4P+PE Automation & Accessories • 3-Axis Linear Robot: TLRE03-650, (optional, not included) • Robot Payload: 3 kg • Pneumatic C-Axis • Mechanical Robot Interface: Euromap 18 • Electrical Robot Interface: Euromap 67 • Vacuum Circuits: 2 • Compressed Air Circuits: 2 • Automatic Lubrication of Main Axes • Robot Protection Class: IP67 • Emergency Stop: 1 • Conveyor Belt Dimensions (optional, not included): 2000 × 400 × 1100 (+100) mm • Safety Fence Dimensions (optional, not included): 800 × 1000 × 2000 mm • Spare Parts Kit with Non-Return Valve (optional, not included)

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well. Guodpfx Astp Df Hsihoh

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Gsdpfx Ajyw Aa Uoihouh Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company Guodpfst Nfarex Aiheh • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Gujdszwhtdspfx Aihjh

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Operating hours: 32,000 New screw and barrel Guodpfsw Uaw Dsx Aihjh

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm * Mold height min./max.: 900 / 2,000 mm * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 Godpfx Asznwt Ijihouh removable tie bar Software for Extrusion

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings Guedpfxex D Ewmj Aihsh • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: excellent (used), Year of construction: 1996, Huriccan Dambauer chip extraction system Filter area: 40 m² 4 barrels (chip containers) Air volume: 5000 m³ Guodjy Sv Axspfx Aiheh Motor power: 5.5 kW Complete with extraction pipes and pneumatic shut-off valves for 8 machines Self-dismantling (dismantling and loading available at extra cost) Price: 5000.- Available from August 2026

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Gusdpfx Aoy Ufk Reihjh Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), Year of construction: 1999, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 4204, pressure: 6 bar, total width: 1,700 mm, inner dimension width: 1,700 mm, workpiece weight (max.): 3,000 kg, turntable diameter: 1,400 mm, We offer this shot blasting machine manufactured by Carlo Banfi in 1999 and completely overhauled by METAL SERVICE s.r.l. in 2024. Rotating barrel machine with metal ribs Capacity: 3,000 kg Diameter: 1,400 mm Chamber width: 1,700 mm Magnetic separator Double turbine, each with a 30 kW electric motor and belt drive Complete with: Dust collection filter Loading hopper complete with guards Parts unloading conveyor belt Gjdpfsznvtajx Aihouh Complete with CE certification, electrical diagrams, and operating and maintenance manual If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Guedsy Hqwyspfx Aihsh Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. Gusdorhidmjpfx Aihoh The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Godpsyugalefx Aihjuh Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery - 4 units Brewhouse | Shandong | 20-25HL | 2019 - 1x mash tun - 1x lauter tun - 1x boiling or wort tun - 1x whirlpool - Manual shut-off valves - Cooling of fermentation tanks is automated - Malt mill | Shandong | 2019 - Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/ h - Oil-fired, but can also be operated with gas by replacing the burner - Wort cooler, 2-stage | Shandong | 2019 - 2x cooling unit (glycol) | 2019 - 2x 28kW - Glycol tank - Hot water tank - 6x Fermentation tanks | 2760l | 2019 - 3 bar, insulated with jacket cooling, CIP capable - 12x Storage tank | 2760l | 2019 - 3 bar, no cooling, were in a separate cold room - Reverse osmosis - Compressor | JAN | 585l/ min | 2020 - KEG filling - 1x drum washer with automatic caustic refill and steam-heated - 1x keg filler - Up to 70 barrels/ h, - Fitting: Type S, basket fitting, - Siemens S7 - Dismantling and loading are included in the price Guodpfx Aieyb N N Ajheh Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc.

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Gsdpfsxykcgsx Aiheuh Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional Gjdpfx Aezht H Rsihouh • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, Year of construction: 1981, functionality: unexamined, Due to the dissolution of the department, an AGIE EMS 3 die-sinking EDM machine is available. The machine was still in operation until 12 months ago, but is no longer needed and is now stored disassembled. It is sold complete, including tank, filtration unit, 2 barrels with original fluid, as well as various tools and copper electrodes. Suitable for hobbyists or professionals—also a good source of spare parts, as these parts are becoming increasingly scarce. Loading with forklift is free of charge, whether you want the complete unit or just specific parts. Collection is preferred, but shipping with a freight carrier is also possible. Price upon request. Gjdjxtq Najpfx Aihouh

Condition: used, functionality: fully functional, P1000 / P1200 H-20 Outercasing & ropebarrel Gsdpfxswd Iyas Aiheuh 4/1 Rope diameter 20 mm Inclusive 4/1 traverse In exellent condition !

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Gsdpfx Aijymn Rvshsuh Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit Godpfxjyrrwks Aihjuh - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 5, total width: 1,600 mm, year of last overhaul: 2024, input voltage: 220 V, working width: 1,600 mm, product width (max.): 1,600 mm, roll diameter: 1,600 mm, roll width: 1,600 mm, tank capacity: 3 l, HP Latex Printer 375 - 3 liter ink cartridges Only 4500 sqm Last complete service, including change of print heads - July 2024 Average maximum width - 1,63 cm; Soft RIP Caldera (without PC). Stand, media feed roller, media take-up roller and tension adjustment kit; High precision for material movement; Gedpfx Aismcw Tleheuh Registration - automatic control of the fit on the sheet, including front/side; Maximum resolution 1200 X 1200 dpi; Automatic double-sided banner printing; 6 print heads - 2 for cyan and black, 2 for magenta and yellow, 1 for light cyan and light magenta and 1 for latex optimizer; Defective nozzle detection and replacement system. Banding elimination solution; Latex-based ink. Barrels of 3 liters; Resistance to scratching; Built-in spectrophotometer for ICC profiling and automatic calibration; Optimized solution for banding removal; Complete drying right inside the printer so that the product is delivered dry and ready for lamination or packaging; Low warm-up time 90 seconds; Automatic feed adjustment; Ink collector for printing on porous textiles. EXW - old price 9900 euro - new price 7900 euro without VAT