Used Batch Reactor for sale (1,277)

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. Ndedjyb Rxlspfx Amtoc The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use Nedpfxexhdwyj Amtedc AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Condition: used, This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features Advanced Steam Sterilization Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs GMP & Cleanroom Ready Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation Integrated Monitoring: Real-time cycle control with full batch documentation capability Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure Built-In Diagnostics: Self-check functions for preventive maintenance Technical Specifications The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). The chamber is constructed from AISI 316L stainless steel, ensuring corrosion resistance and compliance with GMP hygienic standards. A water-ring or liquid-ring vacuum pump enables pre-vacuum and post-vacuum phases for thorough air removal and effective drying. Door configurations can be single or double-door in either sliding or hinged formats, with safety interlocks to prevent opening under pressure. The autoclave requires standard utility connections for steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Njdsxv Dvfspfx Amtedc Applications Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers Biotechnology: Sterilization of fermentation vessels, culture media, and instruments Research Laboratories: Sterilization of glassware, tools, and lab consumables Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles System Components High-grade stainless steel chamber with polished finish Vacuum pump system for pre- and post-cycle air removal Steam generation and distribution system Control panel with PLC and HMI touchscreen Integrated temperature and pressure sensors for validation Quality & Compliance Manufactured in accordance with GMP guidelines Complies with EN 285 and ISO 17665 sterilization standards Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments Designed for integration into cleanroom and production facilities Benefits Consistent, Validated Sterilization for a wide range of load types Flexible Confi...

Condition: excellent (used), Year of construction: 2005, 380 USED Miwe Athlet loading and unloading system. TECHNICAL DATA: - year of production: 2005 Ndodpoy S Da Ejfx Amtoc EQUIPMENT: - 4 trolleys with belts for proofing and loading bread The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. Ndsdpfxjrivv Es Amtec It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Ndedjrivwfepfx Amtec Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Ndsdpfjwrnf Eox Amtoc Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: good (used), Superfax PF-460 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 315×432 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Power supply: 230V Weight: 34kg Nodpfsz Rk I Njx Amtedc Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound signal when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: like new (used), Year of construction: 2020, operating hours: 2,367 h, functionality: fully functional, machine/vehicle number: 10058088, Markem-Imaje SmartLase C350 CO2 Laser Marking Machine – SL350 Controller + BOFA ES500+ Extractor – 2020 Price: €10,000 excluding VAT Manufacturer: Markem-Imaje Model: SmartLase C350 Year: 2020 Condition: Used Location: Boxtel, Netherlands DESCRIPTION For sale: Complete Markem-Imaje SmartLase C350 industrial CO2 laser marking and coding system, including SL350 touchscreen controller and Markem-Imaje / BOFA ES500+ fume extraction unit. Manufactured in 2020 and used in a professional, automated food production environment. Designed for high-speed, permanent, non-contact marking of production dates, expiry dates, batch numbers, lot codes, serial numbers, and traceability information. The system is suitable for integration into automated packaging and production lines. A live demonstration of the laser marking system in operation can be arranged upon request. A second Markem-Imaje SmartLase C350 system may also be available for purchase. Please inquire about availability and combined pricing. INCLUDED EQUIPMENT 1. Markem-Imaje SmartLase C350 Laser Marker - Model: SmartLase C350 - Part no.: 10058088 - Serial no.: CN20450209 - Industrial CO2 laser marking technology - High-speed, non-contact coding 2. Markem-Imaje SL350 Controller - Part no.: 10058345 - Serial no.: EY20490001 - Manufactured: December 2020 - Touchscreen operator interface - Power: 100–240 VAC, 50/60 Hz - Total print count: 3,948,396 3. Markem-Imaje ES500+ Fume Extractor - Part no.: 10069039 - Serial no.: 50120740003 Nodpfsz R N T Sjx Amtsdc - Manufactured: November 2020 - Produced by BOFA International - Power: 230 V, 50 Hz, 10 A - Operating hours displayed: 2,367 - Industrial laser fume extraction APPLICATIONS - Food and beverage packaging - Cardboard boxes and cartons - Paper and plastic packaging - Flexible packaging films - Pharmaceutical and cosmetic packaging - Date and expiry coding - Batch, lot, and serial number marking - Automated packaging and conveyor lines Material compatibility depends on the laser configuration and substrate. ADVANTAGES - Permanent, high-contrast marking - No ink, ribbons, or solvents required - High-speed industrial operation - Low consumable requirements - Touchscreen control - Suitable for production line integration - Complete system with fume extraction CONDITION & AVAILABILITY Used industrial equipment, offered as a complete set. The machine can be inspected in Boxtel, Netherlands. A live demonstration in operation can be arranged by appointment. A second SmartLase C350 may also be available. Both systems can potentially be purchased together. Price: €10,000 excluding VAT. International buyers welcome. Collection and transport can be discussed. SEARCH TERMS Markem Imaje C350, SmartLase C350, SmartLase 350, SL350 controller, Markem Imaje laser coder, CO2 laser marking machine, industrial laser printer, laser date coder, laser coding machine, laser batch coding, expiry date printer, packaging laser marker, BOFA ES500+, ES500 Plus fume extractor, used laser marking machine, second-hand laser coder, laser marking equipment, Laserbeschriftungsmaschine, CO2 Laserbeschriftungsgerät, Lasermarkierer, Lasercodierer, Laserkennzeichnung, Markem Imaje Laserdrucker, gebrauchte Lasermarkiermaschine.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 03353, PROBAT UG22 – classic professional coffee roaster – fully refurbished in 2003 For sale: an original PROBAT UG22, a classic professional drum roaster from Probat’s legendary UG series. This machine has a nominal capacity of approximately 22 kg of green coffee per batch and features the characteristic classic Probat design. The roaster was fully refurbished in 2003 and is equipped with an original HEEMAF S.K.A. electric motor, type NK 15-4, 1.1 kW, 1420 rpm, 50 Hz. Price: €25,000 Technical specifications Brand: PROBAT Model: UG22 Serial number: 03353 Njdpfx Ajz Dih Temtodc Capacity: approx. 22 kg per batch Type: classic drum coffee roaster Heating: gas Electric motor: HEEMAF S.K.A. NK 15-4 Motor power: 1.1 kW Motor speed: 1420 rpm Motor power supply: 50 Hz Fully refurbished in 2003 Equipped with an original Schuilenburg identification plate A remarkable example from the classic Probat UG series, suitable for further professional use, restoration/use in an artisanal coffee roastery, or as a valuable addition to a collection. Serial number: 03353

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm Ndsdjz I Dzijpfx Amtjc - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Year of construction: 2004, condition: used, functionality: limited functionality, machine/vehicle number: ST 5151, We offer this used Envirotec Envitherm 50.0/3 W thermal afterburning system, manufactured in 2004. Manufacturer's serial number: ST 5151 Ndedpfez Stbzex Amtoc Year of manufacture: 2004 Three-chamber operation Exhaust gas volume: 50,000 Nm³/h Combustion chamber temperature: 800°C The system essentially consists of three reactor vessels, which are filled with honeycomb bodies as heat storage. The system is equipped with two hot bypasses and an energy recovery system. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Njdpfxjxw Tg Nj Amtsdc Main machine WORKING – vacuum pump requires replacement or repair.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors Nodpfxjz Rv Dps Amtodc - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: used, For concrete paving stones Ndodsz S Eycjpfx Amtec In the 500-liter class (which corresponds to a maximum batch capacity of approximately 655 to 800 kg), Eirich primarily offers two established model series that are very frequently used for this application or traded on the used equipment market. Please note that these are very rare and can be sold quickly, therefore no reservations are accepted, and we reserve the right to sell the equipment at any time. You can send us a WhatsApp message to: The description serves only for the general identification of the system and does not constitute a guarantee in the legal sense of the term. The seller assumes no liability for typing and data transmission errors. The listed data may need to be verified separately. Subject to changes, input errors, errors and prior sale. We look forward to hearing from you.

Condition: used, Year of construction: 2003, functionality: fully functional, power of vacuum pump: 4,000 W, type of input current: AC, total length: 2,200 mm, total height: 2,145 mm, volume flow: 250 m³/h, total width: 1,140 mm, overall weight: 1,300 kg, We offer used Balzers BAK 760 physical vacuum deposition system, year of construction/refurbishing 2003. Year of major upgrade 2010. It is completely functional system for vacuum deposition of various optical materials on glass or other substrates. Elements of system are: - Vacuum chamber BAK 760 (760 mm maximum internal size) Nodpfx Asz Tdlgemtedc - Completely automatic deposition process, based on Windows real time software. - All process control system elements based on Profibus. - 2x E-gun, max 10kW power, with 2 shutters - 2x Thermal evaporator, with 2 shutters - Knudsen planetarium system with 3 arms, increases deposition capacity >2x, increases homogeneity of deposition - Upgrade - ion assisted deposition system (2010) for denser layers - Two low vacuum pumps (Edwards 250 m3/h roots - main, Balzers 170 m3/h - backup) - Cold and warm water circuits included - Glass substrate cleaning machine based on Miele laboratory glass cleaning device included. Cleaning system is high productivity and low work force requirement process. Capacity of one batch (75 minutes process time) of 100 x 50 mm substrates = 320 pcs. - Water purification system. 2 stage system. Stage 1. with simple regeneration process (salt). Stage 2. ion-exchange - external service regeneration. Good for >100 cleaning cycles. - RGA 200 - residual gas analyzer, from Stanford research included (for analyzing vacuum gases and leakages) - Number of stainless steel glass cleaning adjustable cassettes for substrates 25 x 25 mm to 120 x 100 mm and few for even larger substrates included. - And a lot of various tools, spare parts and consumables. All of above is preferably sold as fully functional system. Transfer to your site is demanding process and requires careful dismantling and setup on new location. Company setting up system on our production site can probably help with setup and testing on new site. Visits to current site of equipment highly recommended and test of equipment on your process welcomed. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request. Njdpfszbt Szjx Amtjdc

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. Nedpfezlpanjx Amtodc The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: used, Venjakob RNV 2.0 Exhaust Gas Purification System The system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas supply (the auxiliary burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely decompose into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The purified, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, very little additional gas needs to be supplied. System data Nsdpfozrl Ibex Amtedc Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Manufacturing number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / heating value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 - 1,500 dPa Max. combustion chamber temperature: 850 °C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, BHT INNOVA E3 – Professional Bronchoscope Washing Machine INNOVA – Professional Endoscope Washing Machine for Practices and Small Clinics The INNOVA™ E3s is the world’s best-selling BHT endoscope washing machine. This endoscope washing machine is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing requirements, a total of 10 to 20 endoscope reprocessing cycles are possible per day. This makes it the perfect solution for private practitioners and small clinics that value safe hygiene, efficiency, and reliability. Reliability and the highest level of cleanliness in every cycle: Achieved by complying with DIN EN ISO 15883-1/-4 and the guidelines of the RKI, as well as numerous additional functions, e.g., thermal self-disinfection at 90°C in accordance with DIN EN ISO 15883-4, 4.8.1. Nsdpfoin Edwox Amtsdc - Flexible combination with another INNOVA® E2 or E3 for 30 to 40 reprocessing cycles per day. - Suitable for both glutaraldehyde and peracetic acid from a variety of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber possible. - Option for thermal reprocessing of instruments, e.g., multiple biopsy forceps, polypectomy snares, etc. - Thermal disinfection of the final rinse water, as recommended by the RKI, in the DH version. - Secure documentation and traceability via batch control. Recording of user and endoscope via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing computer systems. Number of endoscopes: For 2 endoscopes or 4 ENT endoscopes. Hygiene concept: Hygienic workflow, single-door. Channel connection system: Single-channel connection or patented pressure chamber system possible. Single-channel monitoring (CMS): No. Chemistry: Glutaraldehyde / Peracetic acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid). Documentation and integration: Yes, interface for printer/data logger standard. Printer standard. Optional scanner/computer interface. Thermal reprocessing of instruments at 90°C: Possible with additional equipment. Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse: 3 x 20 A. Year of manufacture: 19.01.2013 Item condition: used You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Nsdpfx Amszdf Tpotjdc Connection for a conveyor belt and a sorting table.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg Ndjdpfxex Tqf Dj Amtjc

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, • Machine type: Industrial, two-speed spiral dough mixer with an under-bowl (removable) bowl. • Capacity of finished dough: Maximum of 200 kg of dough per batch (with an average hydration ratio of approximately 60%). The minimum amount for optimal kneading is approximately 20–30 kg. • Bowl working volume: Approximately 300 liters. • Number of speeds: 2 mixing/kneading speeds + reverse function for the bowl to facilitate easier removal of the finished dough. • Motor design: Equipped with two independent motors (one for driving the spiral kneading hook, the other for rotating the stainless steel bowl). This ensures constant power and force, even under maximum load with stiff dough. Njdo Adtg Tspfx Amtsdc • Lifting and locking system: Integrated hydraulic system for automatic lifting and lowering of the machine head when moving the under-bowl bowl in and out. • Material construction: The bowl, center knife, and spiral hook are made entirely of high-quality food-grade stainless steel. • Bowl cover: Stainless steel, enclosed cover with an inspection window/opening, which effectively prevents flour dust from spreading into the bakery area and allows for safe addition of ingredients during the kneading process. • Cleaning: The bowl is equipped with a drain plug at the bottom for quick, easy, and hygienic cleaning. • Operating voltage: 400 V • Network frequency: 50 Hz • Total power consumption: 12.75 kW • Number of phases: 3 phases

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC Ndodpfxeyf N H Aj Amtjc • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Ndodpfxjwukzho Amtec Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110