Used Bench Drill for sale (7,004)

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Lhodow I Um Topfx Al Tjh Availability: by arrangement Location: Solingen

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips Lhedpfow Nabxox Al Teh for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Lsdpfxsx Nfp Aj Al Tohh Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Ledpfoyamc Dox Al Tshh Device Operating instructions Bit This item is an unused display unit.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Lhodpfxoy Ih Tze Al Teh Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Lhjdsw Naabjpfx Al Tjh Availability: short term Storage location: Flörsheim

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Lhedsw I Uwxepfx Al Tsh Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: used, Display unit Ledpfx Aljv Ntb Ij Tohh Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Year of construction: 1970, Technical details: bore stroke: 170 mm total power requirement: 3,5 kW Lodpfxjzgcx Ho Al Tjhh dimensions of the machine ca.: 0,75 x 1,10 m

Condition: used, Year of construction: 2016, operating hours: 5,613 h, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Operating hours: 5613 - Main motor power [kW]: 5.5 - Number of controlled axes [pcs]: 1 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Working range Z [mm]: 60 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 35 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 12 Ljdpoxy Rk Rjfx Al Tohh - Max. drilling depth [mm]: 60 - Manual operation: Yes - Control: SCM Xilog - Software: Xilog Plus - Saw unit present: Yes - Safety feature: - Spindle speed control: Continuously adjustable - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen Lhjdpfx Aezfqmpel Tjh 2580 x-travel 2500 mm throat 1000 mm 1000/2800 mm weight 3,7 t

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual Lodpfxox Dngko Al Tehh

Condition: used, functionality: fully functional, ELLIOTT PROGRESS NO.3A PILLAR DRILL - HEAVY DUTY INDUSTRIAL Robust British-made industrial pillar drill suitable for workshop, fabrication, or engineering use. Make: Elliott Model: Progress no. 3A Type: Geared head Pillar Drill Power: 440v, 3-phase Ljdpey N Tikofx Al Tjhh Features: Heavy duty cast construction geared speed selection (approx. 110-1780 rpm) large adjustable table industrial capacity machine Condition: Used complete and in original condition

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Lhjdpfxsy R Ebno Al Toh Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm Lsdpfxsb A Ikio Al Tohh -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: excellent (used), Lindner Burst Test Stand We offer a Lindner burst test stand here. AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Lodpfx Alezd Sivs Tehh Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: - Number of drilling spindles: 21 pcs. with 32 mm spacing - Drilling direction: Bottom and end face - Swivel range: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs. - Passage: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Diameter of dust extraction: 120 mm - Includes a variety of stops (see pictures) Lhsdpfxsy Tczke Al Teh Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Location: Röllbach Lhodew I Ugtjpfx Al Toh

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Lhjdpfx Aew I Uy Tel Teh Availability: short-term Location: Röllbach

Condition: new, spindle mount: MK 4, total width: 1,020 mm, total length: 610 mm, total height: 2,450 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, clearance between the columns: 375 mm, mount diameter: 50 mm, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Lodezdq Tmjpfx Al Tjhh Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, clearance between the columns: 350 mm, mount diameter: 40 mm, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Lsdpfxezdq S Nj Al Tehh Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, drilling capacity: 40 mm, quill stroke: 180 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Lhedpfx Aezdq Svjl Tsh Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), KSE Leakage Testing System Here we offer a KSE leakage testing system. Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Ljdpfx Aozdziljl Tohh Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Lhsdoxwaz Hspfx Al Toh

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). Lhedpfxsxnlfle Al Teh - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.