Used Benches for sale (2,217)

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Ibjdszhkb Sopfx Akxja Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Storage location: 3110 Manufacturer: MAXION Year of manufacture: 2006 Machine number: 186477 Type / Model: BT18STP Drilling capacity: 30 mm Threading capacity: M25 Spindle mount: MK 2 Speed range: 120 to 2,160 rpm, continuously variable Overhang: 230 mm Vertical adjustment: 300 mm Table: 600 x 600 mm Clamping area: 300 x 330 mm Stroke: 120 mm Distance table - spindle nose: 40 to 310 mm Ibedpfszcuypjx Akxea Vertical adjustment: 270 mm Total power consumption: 1.3 kW Accessories / Equipment: Belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 160 kg Dimensions with table: 600 x 600 x 1,200 mm

Condition: used, functionality: fully functional, AGME hand-operated bench presses Ibedpfx Aeywyiyokxoa

Condition: ready for operation (used), Drill diameter: 16 mm Iedpfezh H Nxsx Akxoba Spindle mount: MK 3 Overhang: 240 mm Quill travel: 100 mm Spindle speeds, infinitely variable via pole-change motor and 2 groups: 250 - 4000 rpm Drive motor: 380 V, approx. 1/1.3 kW Approximate footprint: 2200 x 620 x total 1770 mm Approximate weight: 280 kg

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Ijdpfou T Hhkox Akxsba Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Isdpfx Akozg Ex Nexsba Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2014, total length: 3,400 mm, total width: 1,200 mm, total height: 2,880 mm, Colour: White Empty weight: 1.500 kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 183610114 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. clamping width [mm]: 3000 - Max. clamping height [mm]: 1710 - Max. clamping depth [mm]: 100 - Number of cylinders [pcs]: 4 - Cylinder stroke [mm]: 1200 - Options: Remote control, Horizontal/vertical cylinders separately controlled - Voltage [V]: 400 - Current consumption [A]: 3.5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1200mm x 2880mm (l x w x h) - Transport weight [kg]: 1500kg Ijdpfx Akozgbugoxoba - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Type / Model: CM10/55 Iodpfx Aeznrnyskxeba Drilling capacity: up to 10 mm Spindle mount: Drill chuck Speed range: 460 to 2,190 rpm (?) Stroke: 100 mm Overhang: 220 mm Table: 275 x 220 mm Total power consumption: 0.4 kW Accessories / Equipment: Drill chuck Condition: good Weight: 125 kg Dimensions: 330 x 750 x 660 mm

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm Isdpfx Asyv Ahvokxjba -Weight: 145 kg

Condition: new, Continuous drilling capacity in St 60 steel: 15 mm Normal drilling capacity: 18 mm Thread cutting capacity: M 8 Spindle: MK 2 Drilling depth: 80 mm Overhang: 180 mm Spindle speeds, stepless: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table area: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Ibjdpeb Eldnefx Akxoa Weight: 80 kg Three-phase motor with frequency control: 1.1 kW Equipped with a fully functional threading unit and programmable digital display Machine in stock and immediately available

Condition: new, Precise, smooth-running standard drilling machine, high accuracy and quality. Drilling table adjustable via rack and pinion and pivotable around the column. Full motor protection, star handle. Mains connection 230 V. Continuous drilling capacity in St 60 steel: 15 mm Normal drilling capacity: 18 mm Spindle speeds, stepless: 200 - 4,000 rpm Spindle: MK 2 Drilling depth: 80 mm Overhang: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor with frequency control: 1.1 kW Ibjdpfx Akjda Nqxjxja Equipment: - Reversing switch for right/left rotation for thread cutting - Full motor protection - Star handle In stock, immediately available

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides Isdpsvnrm Hefx Akxeba - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: good (used), Storage location: 3112 Manufacturer: Wörner Machine number: 31101 Type/Model: B13S Drilling capacity: up to 10 mm Spindle mount: MK2 B16x2 Speed range: 540 to 2,500 rpm, stepless Stroke: 120 mm Overhang: 250 mm Table surface area: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance from table to spindle nose, min/max.: 80 / 480 mm Total power consumption: kW Accessories/Equipment: Drill chuck Ibsdpsznl I Tefx Akxoa Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 mm

Condition: new, Year of construction: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Ibjdpsxbzuvefx Akxoa Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Condition: new, Year of construction: 2026, The CORMAK WS32BC bench drill press is a precision column drill for metal, equipped with automatic spindle feed and a cooling system, designed for demanding drilling and tapping operations. With its 8-speed gearbox, rigid construction, and extensive equipment, it is perfectly suited for intensive industrial use. Key Advantages Automatic spindle feed with adjustable speed up to 110 mm/min – improves ease of operation and ensures repeatable machining results Integrated cooling system – protects tools from overheating and enhances machining quality Tapping function – automatic spindle reverse enables efficient thread cutting up to M24 High structural rigidity – 100 mm diameter column and heavy-duty base effectively reduce vibration 150 mm spindle stroke – allows deep drilling without interrupting the cycle 8-speed gearbox – range of 140–1960 rpm for precise parameter adjustment Enhanced safety – spindle and belt guards with limit switches, CE compliant Design and Technology The CORMAK WS32BC bench drill press is built from seasoned, precision-machined cast iron components. The spindle and transmission shafts are made of hardened steel to ensure durability and wear resistance. The MK3 Morse taper allows quick tool changes and compatibility with a wide range of drills and taps. The stable worktable, rotatable 360°, facilitates machining of workpieces with various shapes and dimensions. Precision and Performance Thanks to the automatic feed system and integrated cooling, the WS32BC ensures high hole quality and significantly reduces machining cycle times. The 1.1 kW main motor and 0.12 kW feed motor provide efficient operation even under heavy loads. The machine is ideal for drilling, reaming, and tapping in steel, cast iron, and alloy materials. Applications The CORMAK WS32BC automatic feed drill press is an excellent solution for: tool rooms and metal fabrication workshops maintenance departments manufacturing plants technical schools and training centers Standard Equipment Isdpfxjrigaqo Akxsba Keyed drill chuck Drift key for taper removal Cooling system U-type spindle guard with limit switch Belt drive cover with safety switch Technical Specifications Parameter Value Max. drilling diameter (steel) 32 mm Max. tapping diameter (steel) M24 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Feed speed 0–110 mm/min Spindle–column distance 265 mm Spindle–table distance 390 mm Spindle–base distance 745 mm Spindle taper MK3 Speed range 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Number of speeds 8 Table dimensions 380 × 400 mm Base dimensions 645 × 470 mm Machine height 1370 mm Main motor power 1.1 kW Feed motor power 0.12 kW Power supply 400 V Net weight 230 kg Machine dimensions 900 × 500 × 1400 mm

Condition: new, Year of construction: 2026, CORMAK W25 Bench Drill Press for Metal with Tapping Function – Advanced Professional Drilling Machine The CORMAK W25 metal bench drill press is an advanced column drilling machine designed for professional workshop and industrial applications. Thanks to its integrated tapping function, large quill stroke and robust construction, the machine provides high precision and reliability in both drilling and tapping operations. It is ideal for single-piece and serial production, as well as for maintenance departments and technical service facilities. Main advantages of the machine Tapping function with automatic spindle rotation reversal – enables safe and fast thread cutting without changing tools or requiring additional operator intervention. Manual rotation direction control with a foot lever – allows precise retraction of the tap during manual operation. Large quill stroke of 125 mm – enables deep drilling and safe tapping without repositioning the workpiece. Adjustable worktable – tilts within ±45° and rotates 360° around the column, allowing convenient angled drilling and machining of irregular components. Belt drive system – ensures quiet, stable operation and easy maintenance. Belt transmission guard with limit switch – complies with workplace safety standards by protecting the operator from moving drive components. Construction and technology The CORMAK W25 model features a massive cast iron construction that provides high rigidity and reduces vibrations during machining. The MK3 spindle taper allows the use of a wide range of tools. A stable 100 mm diameter column and a heavy-duty base with T-slots enable secure clamping of workpieces. All structural components have been designed for long-term and intensive operation in demanding workshop environments. Precision and work efficiency The CORMAK W25 metal bench drill press offers five spindle speed ranges: 290, 420, 740, 1260 and 2150 rpm, allowing optimal adjustment of machining parameters to the material type and hole diameter. The tapping function with automatic spindle rotation reversal reduces cycle time and improves operational safety. The large working range (up to 630 mm between the spindle and base) allows machining of larger components. Applications The W25 column drill press is designed for intensive use in: industrial and metalworking workshops, production plants and tool rooms, maintenance departments, service centres, technical and vocational schools. It performs excellently both in standard drilling operations and in tapping processes in steel, aluminium and non-ferrous materials. Standard equipment Self-locking drill chuck MK3 drill chuck arbor Foot lever for changing spindle rotation direction Belt transmission guard with safety limit switch Technical specifications Parameter Value Maximum drilling diameter 25 mm Spindle quill stroke 125 mm Quill diameter 50 mm Spindle taper MK3 Spindle speed range 290 / 420 / 740 / 1260 / 2150 rpm Iedpfx Aorif I Rskxsba Spindle axis-to-column distance 240 mm Column diameter 100 mm Table dimensions 280 × 300 mm Horizontal table rotation ±45° Table rotation around column 360° Maximum spindle-to-table distance 367 mm Maximum spindle-to-base distance 630 mm Motor power 1100 W / 400 V Dimensions (L × W × H) 800 × 400 × 1100 mm Weight 165 kg

Condition: new, Year of construction: 2026, CORMAK W16 Bench Drill Press for Metal with Tapping Function – Precise and Reliable Drilling Machine The CORMAK W16 metal bench drill press is a precise and reliable column drilling machine equipped with a tapping function. Designed for professional applications, it is suitable for locksmith workshops as well as industrial production lines. The integrated spindle rotation direction change system makes it an ideal solution for both drilling and internal thread cutting operations. Main advantages of the machine Tapping function with automatic spindle rotation reversal – provides full control over the process without the need for manual gear changes. Manual rotation direction change using a foot lever – allows precise tool retraction during special operations. High spindle rigidity – ensures accurate holes even during long operating cycles. Ibjdpfjrif Iuox Akxsa Adjustable drilling/tapping depth setting – protects against exceeding the specified technological parameters. Tilting and rotating worktable – adjustment of ±45° horizontally and full 360° rotation around the column. Belt drive system – ensures quiet operation and reduced vibration. Built-in overload protection – safety limit switch installed in the belt transmission guard. Construction and technology The CORMAK W16 column drill press is based on a highly rigid cast iron construction, ensuring stable operation even with maximum quill extension. The spindle with an MK2 taper provides compatibility with a wide range of tools. The belt drive system offers five speed ranges (480–4100 rpm), allowing precise adjustment of operating parameters to the properties of the processed material. Precision and work efficiency Thanks to the 100 mm spindle quill stroke and adjustable drilling depth, the operator has full control over every stage of machining. The integrated tapping function makes the W16 a versatile machine for both drilling and thread cutting while maintaining high repeatability. The spindle speeds have been selected to provide optimal efficiency for drilling holes and producing metric threads in materials with different hardness levels. Applications The CORMAK W16 metal bench drill press is an ideal solution for: mechanical workshops and tool rooms, maintenance departments, assembly and production lines, technical schools and training centres. The machine is suitable wherever a precise drill press with tapping capability is required for machining steel, aluminium and engineering plastics. Standard equipment Self-locking B18 drill chuck MK2 drill chuck arbor Foot lever for changing rotation direction Belt transmission guard with limit switch Technical specifications Parameter Value Maximum drilling diameter 16 mm Spindle quill stroke 100 mm Spindle taper MK2 Spindle speed range 480 / 800 / 1400 / 2440 / 4100 rpm Spindle axis-to-column distance 193 mm Table dimensions 200 × 230 mm T-slots (table/base) 18 mm / 14 mm Base dimensions 528 × 360 mm Maximum spindle-to-table distance 315 mm Maximum spindle-to-base distance 556 mm Horizontal table rotation range ±45° Table rotation around column 360° Motor power 750 W / 400 V Weight 90 kg

Condition: new, Year of construction: 2026, The CORMAK WS20 bench drill press is a professional column drill for metal, designed for drilling and tapping operations in industrial environments. Thanks to its robust construction, extended spindle stroke, and automatic tapping function, the machine delivers excellent performance and precision when machining metals, particularly structural steel. Key Advantages Tapping function with automatic reverse rotation – fast and safe thread cutting up to M16 in steel Ibodpferif Trex Akxsa High structural rigidity – 85 mm diameter column and seasoned cast iron head, base, and table ensure stability and vibration damping 135 mm spindle stroke – enables deep drilling without repositioning the workpiece Belt drive system – five precisely selected speeds ranging from 280 to 1875 rpm Guards with limit switches – CE compliant, enhanced operator safety Large 360° rotating worktable with T-slots – flexible and secure workpiece clamping Design and Technology The CORMAK WS20 metal drill press is built from high-grade materials for durability and long service life. The spindle and transmission shafts are made of hardened steel to ensure wear resistance. The head, column, and table are manufactured from precisely machined seasoned castings, providing excellent rigidity of the entire structure. The MK2 Morse taper allows for quick tool changes and compatibility with a wide range of tooling. Precision and Performance Thanks to its rigid column, extended spindle travel, and refined belt transmission system, the machine ensures precise and repeatable drilling and tapping operations. The clear control panel simplifies operation, while the powerful 1.1 kW motor enables efficient machining even in more demanding materials. Applications The CORMAK WS20 column drill is ideal for use in: industrial plants mechanical workshops maintenance departments technical schools and training centers The machine is designed for drilling and tapping in steel, aluminum, and non-ferrous materials. Standard Equipment Keyed drill chuck Drift key for taper removal U-type spindle guard with safety limit switch Belt drive cover with limit switch Technical Specifications Parameter Value Max. drilling diameter (steel) 20 mm Max. tapping diameter (steel) M16 Spindle stroke 135 mm Spindle taper MK2 Speed range 280–1875 rpm Number of speeds 5 Column diameter 85 mm Column wall thickness 12.7 mm Spindle–column distance 260 mm Spindle–table distance 366 mm Spindle–base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: new, Year of construction: 2026, The CORMAK WS16 bench drill press is a compact yet exceptionally robust column drill designed for precise drilling and tapping operations in workshop and production environments. Thanks to the automatic spindle rotation reversal function, the machine enables efficient thread cutting in steel, making it an excellent solution for users who value productivity and machining quality. Key Advantages Built-in tapping function with automatic reverse rotation – simplified internal threading process High spindle rigidity – precise performance even under heavy load and when machining harder materials Solid construction made of seasoned cast iron – ensures operational stability and long service life Large spindle stroke – 100 mm – extended operating range, especially for deep-hole drilling Clear control panel – intuitive operation with quick parameter adjustment U-type spindle guard with limit switch – CE-compliant and enhanced operator safety 360° rotating worktable with mounting slots – flexible positioning and secure clamping of workpieces Design and Technology The CORMAK WS16 metal drill press is engineered with a focus on durability and structural rigidity. The head, column, base, and table are made from high-grade seasoned castings, ensuring excellent stiffness of the entire structure. Ibsdpfx Asrif S Rjkxoa The spindle and transmission shafts are manufactured from hardened, heat-treated steel to minimize wear during prolonged use. The drive mechanism is based on a belt transmission system, valued for its quiet and stable operation. Precision and Performance With 5-step spindle speed adjustment ranging from 480 to 1875 rpm and an MK2 Morse taper, the machine allows optimal parameter selection according to material type and drilling diameter. Maximum drilling capacity in steel: 16 mm Maximum tapping capacity in steel: M10 The clear control panel and the ability to switch spindle rotation direction significantly streamline operation while increasing overall efficiency. Applications The CORMAK WS16 column drill is ideal for: metalworking and mechanical workshops maintenance departments training workshops and educational centers single-piece and small-batch production applications requiring high repeatability and precision in drilling and tapping Standard Equipment Adjustable drill chuck with key (MK2 Morse taper) Drift key for taper removal Spindle guard with safety limit switch (CE compliant) Belt transmission cover with limit switch Technical Specifications Parameter Value Max. drilling diameter (steel) 16 mm Max. tapping diameter (steel) M10 Column diameter 70 mm Column wall thickness 12.7 mm Spindle stroke 100 mm Spindle–column distance 193 mm Spindle–table distance (max) 330 mm Spindle–base distance (max) 613 mm Spindle taper MK2 Speed range 480–1875 rpm Number of speeds 5 Table dimensions 265 × 285 mm Base dimensions 360 × 480 mm Machine height 1130 mm Motor power 1.1 kW Power supply 400 V Net weight 131.5 kg Machine dimensions 600 × 400 × 1150 mm

Condition: new, Year of construction: 2026, CORMAK Z7016 Vario Bench Drill Press for Metal – Compact and Functional Precision Drilling Machine The CORMAK Z7016 Vario metal bench drill press is a compact and functional column drilling machine designed for precise drilling operations in professional workshops and industrial applications. Thanks to stepless speed adjustment, a robust construction and versatile equipment, this model provides maximum control over the drilling process and high work efficiency. Main advantages of the machine Stepless speed adjustment – a range of 350–2400 rpm allows optimal adaptation to the processed material. Solid cast iron construction – ensures high rigidity and reduces vibrations during operation. Height and angle adjustable worktable – tiltable from -45° to +45° with rack-and-pinion height adjustment. Laser pointer and LED lighting – provide maximum drilling accuracy and improved operator comfort. Electronic speed display – enables real-time control of operating parameters. 65 mm vice included – the machine is ready for operation straight after unpacking. Construction and technology The Z7016 Vario metal bench drill press is built on a solid Ø60 mm column and a rigid cast iron base measuring 400 × 232 mm. The machine body and worktable are made from precisely machined castings. The MK2 spindle taper allows the use of a wide range of tools, while the 90 mm spindle stroke enables machining of deeper holes. With an overall height of only 910 mm, the machine is an ergonomic and mobile workshop solution. Precision and work efficiency Equipped with a 550 W (S1) / 700 W (S6) motor, the CORMAK Z7016 Vario column drill press allows efficient drilling in metal up to 16 mm in diameter. The stepless speed adjustment eliminates the need to change belt positions, significantly reducing machine setup time. The ergonomic three-arm feed handle, depth indicator and precise spindle guidance system ensure high repeatability and accuracy of drilled holes. Applications The Z7016 Vario metal bench drill press is recommended for: locksmith and service workshops, maintenance departments, technical schools, small production lines and prototyping workshops. Standard equipment 65 mm machine vice Laser drilling pointer LED work area lighting Electronic speed display Three-arm spindle feed handle Tilting table with rack-and-pinion height adjustment Ibodpfx Asrif H Ejkxoa Technical specifications Maximum drilling diameter 16 mm Spindle speed range 350–2400 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 90 mm Spindle-to-column distance 150 mm Spindle-to-base distance 430 mm Table height adjustment range 335 mm Column diameter 60 mm Table dimensions 240 × 240 mm Base dimensions 400 × 232 mm T-slot width 14 mm Motor power (S1 / S6) 550 W / 700 W Overall height 910 mm Weight 46 kg

Condition: new, Year of construction: 2026, Z7020 Vario Bench Drill Press for Metal – Solid, Compact and Precise Drilling Machine The Z7020 Vario metal bench drill press is a solid, compact and precise column drilling machine designed for locksmith workshops, tool rooms and production facilities. Thanks to stepless speed adjustment, an electronic speed display and a rigid construction, the machine ensures high-quality drilling performance across a wide range of metal materials. Main advantages of the machine Stepless spindle speed adjustment from 190–2700 rpm – allows optimal adjustment of operating parameters to the type of material being processed. Electronic speed display – provides precise control of drilling parameters. Laser pointer – facilitates hole positioning and improves drilling accuracy. Tilting worktable from -45° to +45° – enables angled drilling without repositioning the workpiece. Solid Ø70 mm column and heavy-duty base – ensure rigidity and stability during operation. 100 mm vice included – allows quick and secure clamping of workpieces. Isdpfxevzqrzs Akxoba Work area lighting – improves comfort and safety when working in low-light conditions. Construction and technology The Z7020 Vario column drill press has been designed for long-term and reliable operation. The precisely machined spindle with an MK2 taper and a maximum spindle stroke of 120 mm provide a wide operating range. The rack-and-pinion table height adjustment system allows quick and accurate positioning of the work area. The machine’s cast iron construction reduces vibrations and improves machining quality. Precision and work efficiency Thanks to its rigid construction and optimized axis geometry, the Z7020 Vario metal bench drill press provides high drilling accuracy. The stepless speed adjustment allows perfect adaptation to the hardness and structure of the processed material, significantly extending tool life and increasing production efficiency. Applications The Z7020 Vario is a professional bench drill press suitable for: metalworking workshops, maintenance departments, production and service facilities, technical schools and training centres. It is ideal for both single-piece production and small-batch manufacturing wherever precision and repeatability of drilled holes are required. Standard equipment 100 mm machine vice Laser pointer LED work area lighting Three-arm spindle feed handle Electronic spindle speed indicator Drilling depth stop Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 530 mm Table height adjustment range 380 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Overall height 1120 mm Weight 66 kg

Condition: new, Year of construction: 2026, The CORMAK WS32 bench drill press is a robust and precise column drill for metal, designed for intensive operation in industrial and workshop environments. With high structural rigidity, an impressive spindle stroke, and tapping capability up to M24, this machine is a versatile tool for a wide range of machining applications. Key Advantages Tapping function – automatic reverse rotation enables safe and precise thread cutting 150 mm spindle stroke – allows deep-hole drilling without repositioning the workpiece High rigidity – 100 mm diameter column and stable cast iron base ensure excellent stiffness and vibration damping Belt drive system – five speed settings (280–1875 rpm) for precise speed adjustment to suit the material MK3 Morse taper – compatible with a wide range of drills and taps 360° rotating worktable – with T-slots, manually adjustable Enhanced safety – U-type spindle guard with limit switch and CE certification Design and Technology The CORMAK WS32 metal drill press is manufactured from high-quality seasoned cast iron, ensuring long-term durability and machining precision. The hardened spindle and transmission shafts are highly wear-resistant. A clear control panel and ergonomically arranged operating components improve operator comfort and ease of use. Ibodpfx Akorif Udoxja Precision and Performance Thanks to its heavy-duty construction and extended spindle travel, the WS32 ensures stable performance even in demanding applications. The ability to tap up to M24 makes it an ideal solution for machining heavy steel components. Smooth spindle operation and a flexible speed range enhance both drilling and tapping efficiency. Applications The CORMAK WS32 column drill is designed for: machinery and metalworking industries metal fabrication and tool rooms maintenance departments technical schools and training centers The machine enables precise drilling, reaming, and tapping in steel, cast iron, and non-ferrous materials. Standard Equipment Keyed drill chuck Drift key for taper removal U-type spindle guard with safety limit switch Belt drive cover with safety switch Technical Specifications Parameter Value Max. drilling diameter (steel) 32 mm Max. tapping diameter (steel) M24 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Spindle–column distance 265 mm Spindle–table distance 390 mm Spindle–base distance 745 mm Spindle taper MK3 Speed range 280, 400, 675, 1140, 1875 rpm Number of speeds 5 Table dimensions 380 × 400 mm Base dimensions 645 × 470 mm Machine height 1370 mm Motor power 1.1 kW Power supply 400 V Net weight 230 kg Overall dimensions 900 × 500 × 1400 mm

Condition: new, Year of construction: 2026, CORMAK WS20B Bench Drill Press – Precision Metal Drilling Machine with Automatic Spindle Feed The CORMAK WS20B bench drill press is an advanced column drilling machine for metalworking, equipped with automatic spindle feed, enabling precise drilling and tapping in structural steel and other metals. Thanks to its robust construction, high power and accurate feed control, the WS20B provides high efficiency and reliability in both industrial and workshop applications. Main advantages of the machine Automatic spindle feed – precise feed adjustment up to 80 mm/min allows smooth and controlled drilling operations. Thread tapping function with automatic rotation direction switching – ensures safe and effective operation with taps up to M16. High rigidity construction – an 85 mm diameter column and seasoned castings reduce vibrations and improve drilling accuracy. 135 mm spindle stroke – allows deep drilling without the need to reposition the workpiece. Belt drive system – 5 speed levels ranging from 280–1875 rpm allow optimal adjustment of parameters to the processed material. CE safety systems – spindle and belt transmission guards with limit switches increase operator safety. Construction and technology The CORMAK WS20B bench drill press with automatic feed has been designed for long-term and reliable operation. The spindle and transmission components are made of hardened and thermally treated steel. The column, base and worktable are manufactured from precisely machined, seasoned cast iron components. The MK2 Morse taper enables quick tool replacement and compatibility with a wide range of accessories. Precision and work efficiency The combination of automatic spindle feed and a powerful 1.1 kW motor enables smooth and repeatable drilling, even in difficult-to-machine materials. The rigid construction and the ability to rotate the worktable 360° improve operator comfort and provide greater flexibility when positioning workpieces. Applications The CORMAK WS20B drill press with automatic feed is used in: industrial plants, mechanical workshops, maintenance departments, technical schools and training centres. It is designed for drilling, reaming and tapping operations in metals, aluminium and engineering plastics. Standard equipment Drill chuck with key Morse taper drift key U-type spindle guard with safety limit switch Belt drive guard with safety limit switch Technical specifications Parameter Value Maximum drilling diameter (steel) 20 mm Ibsdpfx Ajrif T Dokxsa Maximum tapping diameter (steel) M16 Spindle stroke 135 mm Spindle taper MK2 Spindle speed range 280–1875 rpm Number of speeds 5 Feed speed range 0–80 mm/min Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Thread cutting capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm Overhang: 225 mm Speed range A: 100 - 2,000 rpm Speed range B: 200 - 4,000 rpm Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Overall height: 955 mm Ibodpfx Akscw H Syjxea Weight: 110 kg Three-phase motor with frequency control: 1.5 kW Robust, precise universal drilling machine with a wide range of applications. Table/height adjustment is adjustable via rack and pinion and worm gear. Three-phase motor, reversing switch for right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with front-mounted height adjustment. Mains connection 230 V.

Condition: excellent (used), Year of construction: 1999, Storage location: 2820 Manufacturer: IXION Year of manufacture: 1999 Type/Model: BT 15 Machine number: 182904 Drilling capacity: up to 16 mm Spindle mount: Drill chuck B16 Speed range: 480 to 3,800 rpm Table: 290 x 350 mm Overhang: 225 mm Stroke: 100 mm Head height adjustment: 300 mm Distance table-chuck: 70 to 370 mm Footprint: 290 x 440 mm Connection: 0.8/1.0 kW Accessories/Equipment: Drill chuck Condition: very good Iodswrmrdopfx Akxoba Weight: 140 kg Dimensions: 290 x 440 x 1,700 mm