Used Biesse Rover 24 S for sale (324)

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Power: 10 Kw Overall dimensions Lenght: 3800 mm Width: 1920 mm Height: 2560 mm Rsdpfx Agotqi Uvs Isp Weight: 1300 Kg

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING Rsdetrihvspfx Ag Iop End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 4300 x 4400 mm Max. blade projection from work surface (cutting height): 95 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Rodsucirkepfx Ag Iep Blade carriage speed adjustable from 5 to 120 m/min Pusher feed up to 60 m/min Automatic lateral alignment device 4 air-cushion unloading tables with rounded profile 9 pneumatic clamps Windows PC-based control Remote-controlled Start cycle pusher, including emergency pusher QUICK CHANGE device (quick blade release) Printer for labelling Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter Redpfx Ask Rticsg Iep A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min Rsdeucitnjpfx Ag Ijp 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 Rsdpfx Agegipk Ae Iep max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 36956, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, total length: 9,800 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Rsdpsx A Tzqofx Ag Ijp Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: good (used), Year of construction: 2014, functionality: fully functional, edge thickness (max.): 3 mm, feed rate X-axis: 24 m/min, product height (max.): 60 mm, product height (min.): 10 mm, product length (min.): 150 mm, product width (max.): 3,200 mm, product width (min.): 100 mm, TECHNICAL DETAILS Type of edge applied: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunctional unit: yes Number of working units: 8 nr Software: SINTRA Advance speed: 25 m/min Panel dimensions Panel height: 10 - 60 mm Panel length: min. 150 mm Panel width: 100 - 3,200 mm Edge thickness: 0.3 - 3 mm Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Model manufacturer: RT30 Automatic intervention by time: yes Speed: 9,000 rpm Edge processing systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 6 Gluing system: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Prefusor model: HM20 Press roller conveyor edge: yes Number of press rollers: 4 With positioning of NC: yes Assembled units in the part of edge processing 1-6 Unit 1: Head processing Model manufacturer: IT90-S Processing speed: 28 m/min Speed: 12,000 rpm Unit 2: Edge milling machine Model manufacturer: RF10 Speed: 12,000 rpm Unit 3: Multifunctional unit Model manufacturer: AR30 Rjdpfx Agov Eabae Iep Automatic tool change: yes Processing speed: 18 m/min Speed: 12,000 rpm Unit 4: Edge scraper Model manufacturer: RB40 With positioning of NC: yes Aggregate 5: glue scraper Model manufacturer: RC20 Aggregate 6: brushing aggregate Model manufacturer: SZ30 Speed: 1,400 rpm Additional systems Spray aggregate: yes CE marking: yes MACHINE DETAILS Total installed power: 25 kW Conveyor and return system Drive speed: 24 m/min Parts return for edge banding machine: left Panel ejection: transfer roller conveyor Panel drive: motorized carpet

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) Rjdpfehknbrox Ag Isp - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Rjdpoukcy Eefx Ag Iop Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: new, Year of construction: 2024, machine/vehicle number: 1000065502, functionality: unexamined, Single Sided Edgebander Stream B 9.5 with: Rjdpsxyf Nzefx Ag Isp premilling unit, gluing unit with EVA-EVA REAL TIME GLUING SYSTEM WITH PRE MELTER (dual EVA gluing system consisting of two independent glue heads tahat allows for real time colo switching without the need for manual glue head changes), 6 position edgebanding containers, edn trimming unit, rough milling unit, fine trimming unit, corner rounding unit, universal milling unit, edge scraper, glue scaper, brushing unit, phon.

Condition: excellent (used), Year of construction: 2001, I sell the Destacking device BIESSE RBO WINNER SC, year 2004. Destacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed tables motorised roller-system on the floor (2 channels) Security fence system fully complete ! Redpfxjxyah Sj Ag Iep Total power 24kW Year 2004. Available immediately. Ready for work.

Condition: used, Year of construction: 2013, Numerical control with Biesse Works Advanced Software Air conditioning system for the electrical panel Working range X 3200 Working range Y 900 Working range Z 70 N ° 1 3-axis horizontal electrospindle, Kw 4.5, Iso 30 cone type "BH 17" boring head with 17 spindles arranged as follows: N ° 6 independent spindles for vertical boring in "X" direction N ° 5 independent spindles for vertical boring in "Y" direction N ° 4 spindles for horizontal boring in "X" direction N ° 2 spindles for horizontal boring in "Y" direction N ° 1 integrated blade in X axis Machine weight Kg 1300 Rodjxlghcepfx Ag Ijp

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Rjdpfjuickyjx Ag Iep Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. Redpeu Rim Hjfx Ag Iop * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Redpfxsr Ip Sde Ag Iop Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: used, Numerical Control with NC 410 Software Machine suitable for 1st pass of the panel Motorized mobile shoulder opening by C.N. 1500mm Panel height 60 mm PVC/Abs mm 3 Continuously variable feed speed Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Squaring part composed of (for each side): * Double shredder group * Automatic timed anti-splinter unit Beading part composed of (for each side): * Gluing group for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with adjustable pressure rollers * 2-position reel magazine with automatic edge change * Overlapping trimming group with 2 motors * Gleaning unit with 2 tilting motors Rsdsrxzb Uopfx Ag Iep * Moulder group tiltable 0-90 ° * Edge scraper assembly * Glue scraper unit * Belt sander assembly * Brush group

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Rsdpovtbzkofx Ag Ijp

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Redpfov Amx Tjx Ag Iep

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Rodped Iv H Refx Ag Isp Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. Rodpfx Aet N Rkvjg Ijp For more photos and details please send the request.

Condition: excellent (used), Year of construction: 1999, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 3 pcs. 3Master vibratori Vibration dowel inserting device. Rodpfx Agst N Hmms Iep Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Rjdpfet N Rixex Ag Isp Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. Rsdpfx Agjt N N Aqj Isp 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2022, Selco WNT 630 Beamsaw working size 3800x2200 with back lift table Technical specifications: Max cutting lenght: 3800 mm, Saw blade projection: 108 mm, Max gripper opening: 100 mm, Min panel size: 1830 x 915 mm, Rodpfxjv T Sdio Ag Iep Max panel size: 3660 x 2200 mm, Max packet hight: 630 mm, Min. thickness on lift table: 10 mm, Lift table max lift: 985 mm, Lift table capacity: 5 t Back loading table or side loading oppening for panels 3800 x 2200 mm