Used Blow Film Extruder for sale (3,598)

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Bdedpfx Aaoq R Tkwoqei Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Bdodpfxexpq Hko Aaqoi

Year of construction: 2016, condition: good (used), functionality: fully functional, Farmet FE500 extruder for soybean, other oilseed, grain, pet food etc, in good condition, complete with command box. Motor 55kw Bdsdexfc Uxspfx Aaqei Capacity 500-750kg/h

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Bsdpfx Ajwnm Ukjaqodi Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 2000, System for applying butyl cord. Bsdpfxoxp N Hvo Aaqedi Length: 2900 mm. Depth: 800 mm. Height: 900 mm. Weight: approx. 850 kg. Condition: good, second-hand

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Bdedpohgq Ahsfx Aaqji Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base Bodpfx Ajxlm Nysaqsdi pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Bdedpexn S Umjfx Aaqsi

Year of construction: 2020, condition: good (used), functionality: fully functional, Great offer! Extruder Farmet FE1000 Clever Max, ideal for texturate/pet food/ fish food/grain. With Clever command box, including PLC, frequency changer, touchscreen, SS steam conditioner and cutting head. Complete solution for manufacturing various products/mixtures. Bjdpsxfcwmefx Aaqjdi Capacity 1.000-1.800 kg/h Extruder was working for 2 years, the rest of accessories never used!

Condition: like new (used), Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile Bdodpfsd R D Tlsx Aaqsi

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Bedpfx Aowi S Swsaqodi Constr. year: 1972 diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Bdjdpfx Aaspaiaioqei Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Bdjdpfxjquuvrs Aaqei AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Bjdoxn Aamjpfx Aaqjdi

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Bjdpfx Aaoxlcfkjqodi Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Farmet extruder FE250, 22kw motor, with command cabinet, made to extrude soybean, grain, rapeseed/sunflower after prepressing, or pet food (with additional cutting head, not included). Condition is very good, most of working parts replaced. Bodpfx Aaowbkyksqsdi Capacity 250-400kg/h

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M08L/9039, Offer Number: M08L/9039 Machinetype: 6 die - 6 blow transfer header Info: bushing cut-off Make: Carlo Salvi Type: 663/TR Constr. year: 2007 diameter range: 2-5 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 35 mm shaft length under head: 25 mm output - pieces/min: 400 dimensions: 12x35 press power: 15 to Bedpfjw N Dl Usx Aaqjdi Location: In our warehouse

Year of construction: 2010, condition: used, Designed for COEX cast film production. Processing of thermoplastics within a temperature range of 150–300°C. The system can be operated with the following configurations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - Monofilm - 3-layer film (A-B-A) Bsdjxl Uh Dspfx Aaqjdi MAIN EXTRUSION SYSTEM FROM KUHNE Total system output: max. 900 kg / h Main extruder: 105/33 L/D, max. 650 kg / h Co-extruder: 90/33 L/D, max. 250 kg / h Net film width: 800–1400 mm Thickness: 25–530 µm Production speed: 8–150 m/min Roller width: 1600 mm Max. roll weight: 2000 kg Version with air knife and vacuum box One gravimetric dosing unit with 3 stations per extruder Each extruder equipped with melt pump and 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness gauge for automatic die with automatic transverse profile control; Beta Controll Corona pretreatment on both sides (also selectable for one side; max. 6,000 W) by AFS WINDING UNIT FROM “SML Co.” Automatic turret winder with automatic splicing Max. finished film width: 1600 mm Max. winding diameter: 1000 mm Turret winder for 6" winding shafts

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Bsdpjud U Sfjfx Aaqjdi Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: used, Year of construction: 2005, Overview  This blow moulder was manufactured in 2005 by German company Krones. The machine has been regularly serviced, overhauled in 2022, equipped with a new control system in 2024, and had its oven chain replaced in 2025. It is currently set to run at approx. 13,000 bph, limited by the filler, but its capacity can be increased up to 19,000 bph. The machine is available with preform feeding system, cooling unit, and spare parts. Technical data  Capacity: up to 19,000 bph (currently running at ~13,000 bph) Formats: 0.2L, 0.5L, 1.0L, 1.5L PET bottles Neck finish: 1881 Scope of Delivery  Blow Moulder | Krones | Contiform S12 | 2005 Preform feeding system (silo, elevator, sorter, chute by Tanner) Cooling unit Set of spare parts Bdedpfx Asxbubpeaqji

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Bsdpfx Ajxnpx Nsaqedi

Condition: good (used), AUTOMATIC PACKER CMB EBC-150/70 + SECOND-HAND BUBBLE PLACEMENT SYSTEM TECHNICAL FEATURES Bdedperlnlwjfx Aaqsi Motor power 2,60 Kw Voltage 380 CE Yes Crown diameter 1550 mm Front table 2000x1300x900 mm Rear table 2000x1300x900 mm Carpet table Yes Automatic film activation Yes Variable speed drive Yes Crown speed variator Yes Bubble system Yes

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: KIESERLING Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 output - pieces/min: 105 shaft length under head: 6-140 mm cutting length: 175 mm press power: 250 to Bedoxlr I Ijpfx Aaqodi Location: Europe

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Bedpfxspah U Ts Aaqsdi Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm Bdodsu H R Iqjpfx Aaqsi net weight 580 kg Good condition