Used Blown Film for sale (1,389)

Year of construction: 2025, condition: new, functionality: fully functional, Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter! Prodpfxsv Dhnxj Adysc Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. The press is fully functional and in constant use. Prodpfxowh R D Ae Adyec The press is fully functional, in constant use.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Prodpfxjwg Sd Uo Adysc Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Psdovkg H Tjpfx Adysrc Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: excellent (used), Year of construction: 2017, Machine for foil wrapping stacks of printed products for protection Podpfx Adsv Sdcusysrc

Condition: used, functionality: fully functional, Fujifilm Luxel F-4080 Film Separator. The Luxel F-4080 is part of Fujifilm's Luxel family of image capture systems. It is a multi-laser imaging system that automatically scans a series of working images downloaded from a RIP server onto film, using an internal drum and a high-speed rotary device to scan the film. It processes the data for fast optical scanning, provides continuous film transport using a dual-cassette system, controls the delivery of cut and punched film to the developer, and controls the software system that manages all the main modules. A touchpad with menu windows in the form of icons and selectable buttons is used to operate the machine. Podpfx Ajv Rr Aasdyorc Good working condition. Please check out our other listings as well.

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, Extruder is supplied by Reifenhauser, mechanical/automation is supplied by JWELL. All working in harmony and fully functional. The line is only used for trial production and almost brand new equipment. Quality test labrotory equipment iss also available upon request. Diameter: 150 mm L/D: 25 Extrusion height: 1.150 mm Extruder design: u-arrangement motor right side Installation: movable design Prjdpfx Aov Erwyodyjc Rails: including Drive cooling. air cooling with external fan Main drive nominated power: 80,00 KW Screw speed n1: 30,00 1/mln Number of heating-cooling zone: 4 Feeding zone tempering heating / cooling shell Heating capacity feeding zone: 14,40 KW Shield cooling yes Total heating capacity barret: 44,00 KW Heating capacity flange: 3,50 KW Barrel wear protection: R121 Barrel grooves. yes Machine colour RAL 7016 Contrast colour. RAL 9005 Screw removal: removal to the front Screw cooling: prepared - Type; Slot Die with coat hanger manifold and upper flex lip. - Polymer: EVA - Output: 300 - 400 kg/h - .Slot Width: 1350 mm - Up Opening: 0.05mm - 1.2 mm - Up Adjustment: Up adjustment of the upper flex lip with push only bolts on 25mm center lines. - Manifold: Computer calculated coat hanger manifold for optimum polymer melt distribution. - Insulation: Die body insulation on upper and lower die body - Control Zones: 12 Zones (6+ 6 in upper/lower die body ♦ 2 sideplates) - Die body: Complete die manufactured from highest quality tool steel. DIN 1.2311 treated to 1000 N/mm - Coating: Hard chrome plated 25 - 35 pm Surface roughness flow channel Ra 0,08 - 0,1pm Surface roughness lip land Ra 0,03 - 0,05pm - Die Inlet: Middle back round - Bectric: Completely wired to customers demand (230 V) on multi pin plugs.Thermocouples installed and wired into multi-pin plug

Condition: good (used), Year of construction: 2010, Film wrapping machine for the protection of printed products Prodjtk Tbwopfx Adyec

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fuji Film LUXEL T-6500CTP S Thermal Platesetter (2017) – B2 Format Technical Details and Equipment List: A. CTP PLATESETTER – LUXEL T-6500CTP S ● Technology: Thermal CTP ● Year: 2017 ● Laser Head: 32-channel (S Version) ● Productivity (B2): Up to 21 plates/hour at 2400 dpi ● Max Plate Size: 830 x 660 mm ● Min Plate Size: 324 x 330 mm ● Imaging Area: 830 x 636 mm ● Plate Thickness: 0.15 – 0.30 mm ● Resolutions: 2400, 2438, 2540 dpi ● Power Supply: 200/240 V, 47/63 Hz, Single-phase 35 A / 5 kW Prsdpfx Adoxm Td Hsyjc ● Weight: 830 kg ● Dimensions (L x W x H): 1985 x 1315 x 1300 mm ● Condition: Used, in daily production. Available for immediate inspection and testing. B. RIP & SOFTWARE SYSTEM ● RIP Processor: FujiFilm XMF PROCESSOR V6 4UP BUNDLE ● Functionality: RIP for B2 format, standard screening, HR/LR output, ICC/DLP/CIP3 support ● License: XMF DONGLE ONLY security key included ● Computer: Dedicated PC for XMF Gateway C. PLATE PROCESSOR ● Model: FLH-Z 85CD ● Max Plate Width: 850 mm ● Min Plate Length: 285 mm ● Plate Thickness: 0.15 – 0.40 mm ● Developing Speed: 15 seconds (dip to nip) ● Developer Tank: 30 L ● Weight: 364 kg (dry) Commercial Information: ● Availability: Machine is active in production. Reason for sale is an upgrade to a larger format.

Condition: not inspected (used), functionality: limited functionality, machine/vehicle number: DMP 2831, Used FUJIFILM Dimatix DMP 2831 materials printer. Manufacturer: FUJIFILM Prodpfx Asxgrpbedysc Model: DMP 2831 Voltage: 200-240V~ (50/60Hz) Includes cables and DimatixDropManager software

Condition: new, Year of construction: 2025, Equipment: auto duplex, Demo system Revoria Press SC285S Very low print count, as it was only used for demonstrations. Prsdpfx Aoxgqvmodyec Meter reading available upon request. Configuration can be customized as needed. Shown here: SC285S with Fiery SC21 Pink Toner Enabling Kit Air Suction Feeder C1-DSXL Banner Unit for Air Suction Feeder C1-DSXL Post Card Kit for Air Suction Feeder Envelope Kit for Air Suction Feeder Interface Decurler Module D1 Static Eliminator D1 Charge Corotron Assembly for Static Eliminator Smart Monitoring Gate D1 Finisher D6 with Booklet Maker Banner Print Extension Kit Extra Sale/rental exclusively within Germany! Price on request!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L45BB815, number of ink cartridges: 8, color channels: 8, number of print heads: 8, paper width (min.): 1,600 mm, number of feeding trays: 2, total length: 730 mm, total width: 3,220 mm, total height: 1,510 mm, space requirement length: 4,000 mm, space requirement width: 4,000 mm, space requirement height: 1,510 mm, Equipment: documentation/manual, Kedveset használt Fuji Acuity LED 1600 II UV nyomtatónk eladó. Táblás anyagok, molinó, öntapadós fóliák, papírok, mesh háló, textil, stb... nyomtatására. Termelékeny, jó állapotú gép, tartalék alkatrészekkel. C,M,Y,K + light cyan, light magenta, white, clear Pjdpjwigu Hjfx Adysrc Hibrid gép: tekercses és táblás nyomtatásra is alkalmas az elő- és utó asztalokkal amik a gép tartozékai. Keressen ha kérdése van!

Condition: excellent (used), Year of construction: 2014, Fuji Film CTP Luxel V8 & Developer FCF-125V | 2014 Overview: Complete computer-to-plate package with autoloader and matching plate developer. Ideal for high-volume production. CTP Unit – Luxel V8-MAL HD: Maximum plate size (with punch): 1160 × 960 mm Minimum plate size (with punch): 500 × 400 mm Large and small plate capability Autoloader with multiple cassettes (expandable) Online processing Dual laser system Works with violet-sensitive aluminium plates Compatible with violet-sensitive aluminium plates (405 nm) such as FUJIFILM Brillia LP-NV, HD LP-NV2, and Superia HD PRO-V Pjdpfx Aow Np Dcsdysrc High plate output per hour In excellent operating condition Developer – Glunz & Jensen FCF-125V: Plate width: 200 – 1250 mm Plate length: 290 – 3000 mm Supports violet chemfree plates Adjustable plate width, length, and thickness ranges Variable plate and brush speeds Lo-Chem technology for reduced chemical usage Large finisher tank capacity Multiple voltage configurations available Condition: Fully functional and well maintained Available for immediate inspection Price: On request

Year of construction: 2015, condition: excellent (used), Semi-automatic pallet wrapper Inv. No. 3583 Manufacturer: Filma Type FP 30 ES Year of manufacture: 2015 * Turntable positioning via fixed stop * Number of foot and head wraps * Turntable diameter: 1650 mm * Maximum wrapping height: approx. 3200 mm * Net weight: approx. 500 kg * Suitable for block panels * With access ramp * Very good condition Prodpfx Aov Ty Iijdyjc

Condition: excellent (used), Year of construction: 2018, 4 Samba print head rows Complete workflow XMF Paper conditioner Cardboard jacket for higher grammages 2nd anilox roller Powder filter kit ColorPath for digital printing package Last complete maintenance by Fujifilm: 07-2024 approx. 4.6 million prints Prsdpfx Ajt Uyy Rodyec

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% Pjdsxryqkepfx Adysrc

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Psdpfx Adsxn Iq Djysrc Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Predpfxjxn Upto Adysc

Condition: used, Year of construction: 2015, air flow quantity 1800 m³/h suction power 1,275 kPa Prjdpfsvvxr Sex Adyec power capacity 1,5 kW weight ca. 125 kg Dimensions (HxWxD) 2,0 x 1,15 x 0,67 m One used oil dust collector - Produced in 53809 Ruppichteroth/ GERMANY - 3,13 A/ 50 Hz - 3AC 400 PE

Condition: used, Year of construction: 1993, Well-maintained CNC profile grinding machine from a screw factory For details, please contact us. Prjdpfx Adowt Uqdsyoc

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Prsdperg D Awefx Adyjc Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm - Pre-installation for chip extraction MG9 - Database for storing cutting data under profile number - 32 pcs combined machine taps M8x1.25 - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours. Prsdpfexmhhgjx Adyec

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Prodpfsxl Dz Tex Adyjc Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Prjdsxmhf Espfx Adyoc

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm Prsdpfx Aovcmirsdyec cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)