Used Blown Film for sale (1,416)

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Lodpfx Aoxn Uptegzsak

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm Lasdpfx Aexl Dz Tjgzok cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Loading Unit: Horizontal loading magazine model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Maximum material height as per saw cutting area; round material max. diameter 130 mm 3 glide strips between timing belts provide additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Maximum saw blade diameter: 500 mm Continuously variable speed adjustment Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 controller with touchscreen Reversing device with five-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting gap extension, both sides Pneumatic extraction slide Scrap flap after the saw for offcuts / remnants Cut-off length depends on profile, from 8 mm Menzel minimal quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust collection Unloading: Table area 1,500 mm x 2,500 mm Pneumatic cross transfer Lodpfx Aoxvbvvogzeak

Condition: not inspected (used), Year of construction: 2002, Chambon (BMH) Profilmax moulder Description Infeed table 2000mm Spindle sequense bottom-right-left-top Motorpower 4/4/4/5,5 kW Power (total) 26kW Planing width: 230mm Planing height: 120mm Spindle diameter 40mm 2000 kg Dimensions 3250 x 1600 x 1600mm CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Lasdpfeq Iir Nsx Agzok

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Lajdsw D T Uiepfx Agzsk Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,842 h, A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible. Lajdpfx Agsvmq Tpozek

Condition: good (used), Year of construction: 2002, ILT UNIFIL MS 1MRV40 – Industrial Air Filter / Extraction System for Oil and Emulsion Mist Technical Specifications: Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: UNIFIL MS 1MRV40 Year of Manufacture: 2002 Serial Number: 8160 Voltage: 3AC 400V Current Consumption: 3.2 A Ledpov Nv Nbefx Agzoak Frequency: 50 Hz Air Flow Rate: Approx. 2,700 m³/h (free-suction) Motor Power: 1.5 kW (Manufacturer: Siemens) Filter Stages: Multi-stage with pre-filter, main filter, and optional post-filter Housing Material: Robust sheet steel construction, painted Dimensions: Approx. L 1,145 mm x W 670 mm x H 1,150 mm Weight: Approx. 120 kg Connection: Pipe connection for exhaust air duct Available Condition: Used, functional, regularly serviced Description: For sale is a professional ILT UNIFIL MS 1MRV40 extraction system, a high-quality air filtration system for the efficient separation of oil and emulsion mists generated in metalworking and other industrial processes. The unit was specifically designed for continuous operation and does not require regeneration phases. It is ideal for turning, milling, grinding, and machining centers where airborne contaminants must be effectively filtered. Special Features: ✔ Highly efficient air filtration: Multi-stage filter system with washable pre-filters for a long service life ✔ Modular design: Filter inserts are replaceable and adaptable for different applications ✔ Energy efficient: Low power consumption with high extraction performance ✔ Robust construction: Sturdy housing for industrial environments, durable components ✔ Flexible installation: Can be installed directly on machines or centrally ✔ Easy maintenance: Tool-free filter replacement, low operating costs ✔ Made in Germany: High quality and reliable performance Areas of application: CNC machining centers Lathes, milling machines, and grinding machines Metal and plastics processing Industrial air purification in production facilities Oil and emulsion mist separation Shipping by freight forwarder available upon request Sold without warranty or guarantee. If you are interested or have any questions, please contact us!

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Ledpfxsvcmire Agzoak Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears Ljdpju Ttf Njfx Agzsak

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production - Connected loads 380V, 10A, 50Hz, 5kW Ljdpfx Agor Ndi Iszsak - Price 1.500,00 €

Condition: like new (used), Wrapping Films in Various Types, Like New Condition 🧰 Product Features • Manufacturer: Sealed Air, Foli Pack, Mima Lite • Model: various types • Condition: like new, see photos • Colour: transparent • Thickness: 15 - 23 μm Laedpfow N Ny Dex Agzjk • Length: 1,000 - 4,200 m Available Films: 2 pcs. Foli Pack 250 mm x 1,000 m 2 pcs. Sealed Air 455 mm x 2,150 m 2 pcs. Sealed Air 605 mm x 2,150 m 12 pcs. Foli Pack 400 mm x 1,000 m 19 μm 18 pcs. Foli Pack 500 mm x 1,250 m 15 μm 23 pcs. Stretch film 500 mm x approx. 3,000 m 23 pcs. Mima Films 440 mm x 4,200 m 30 pcs. Stretch film 500 mm x approx. 4,200 m 23 μm 💰 Price: €1,200 net excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constant stock of over 5,000 linear metres of pallet racking from various manufacturers (Subject to change and error in technical data, specifications, and prices as well as prior sale! See our Terms and Conditions; all prices excl. VAT ex stock.)

Condition: excellent (used), Year of construction: 2000, Ref:11051 . 2000 Adpak EFK 250 L Sealer Semi-automatic L sealing machine for shrink wrapping. Process: The operator places the products inside the shrink-wrap film before the sealing head is lowered This action starts heating up the seals of the packaging, ensuring a snug fit Works well alongside shrink tunnels to ensure a streamlined solution for sealing products quickly. Lsdpsx Nft Ujfx Agzeak Specification: Sealing frame size: 450 x 570 mm Max pack height: 200mm Max speed: 40 packs/min.

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Lodpfsx Izr Rox Agzoak Please provide reference number upon request: 22085 Description:ITO pallet wrapper from 2022.Efficient machine that wraps pallets in plastic film.Ready for delivery.

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Lasdpjx I I Ncofx Agzsk Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, mileage: 377,991 km, power: 330 kW (448.67 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), HydroDrive, electronic braking system with ABS and ASR, PTO (power take-off), Active Brake Assist (ABA), Attention Assist, Traffic Sign Assist, Turn Assist, Lane Assist, Stability Control Assist, engine brake, hill start assist, rear axle differential lock, cruise control, ClassicSpace driver's cab, pre-installation and display for up to 4 cameras, air conditioning, auxiliary hot water heater, multifunction steering wheel, heated and electrically adjustable exterior mirrors, electric window lifters for driver and passenger doors, roof hatch, refrigerator, driver's comfort suspension seat, sleeper berth, central locking with remote control, automatic daytime running lights, fog lights, rotating beacon, tow hitch, hydraulic connections for semitrailers, combined aluminum tank approx. 390 liters diesel and approx. 130 liters hydraulic oil, AdBlue tank approx. 60 liters, air suspension with lifting/lowering function on the rear axle. Vehicle may have advertising adhesive film and/or lettering. Lajdoxqu N Espfx Agzek Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be pleased to provide an offer from our partner workshops. Vehicle may have advertising adhesive film and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this vehicle. Please feel free to contact us!

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Lasdex Irlzepfx Agzok Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Delivery date Immediately Stations Three Max tool dimensions TBC Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Lasdpfjx Ekcasx Agzok Depth of draw 120 mm +/- Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2017, Ref:11050 . 2017 Foliant Vega 400A Laminator. New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs. Equipped with: Integrated deep pile vacuum feeder and a high-speed bump separator Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system. Pneumatic high-pressure system (with integrated compressor inside machine frame) Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm). Feeder: Equipped with a rising pile front separation stream feeder and with a vacuum belt head. Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum. Overlaps are controlled, in an ‘in-run’ mode. Accuracy is +/- 2 mm under-lap (in a constant speed). Fitted with a lifting plate and its capacity is a 28 cm pile of paper. Laminator: Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4). The minimum sheet size is 20 x 30 cm. Compressor is integrated inside the machine frame as standard. Laminating unit is equipped with an adjustable twin decurl unit: • With a decurl blade for offset printed sheets decurling • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). Roll of a film is mounted on a quick-changed shaft with a film tension control breaker. Ledox Nftnopfx Agzeak Shaft capacity is up to 3000 m of the 24 - 42 microns film. Film holder unit is equipped with an in-line trim slitter and a perforating wheel. 2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface. Pressure is pneumatically adjustable. Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. Warming up time is shorter than 10 minutes. Controlled by an interactive, easy understandable icon based touch screen System includes many automation items for an easy control of the machine and a reliable lamination. Separator: Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. Separated sheets are delivered into a vibrating jogger Laminating Films: BOPP films (24 – 42 microns) Nylon films (24 - 35 microns) Specification: Maximal Speed: single side 18 m/min. Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm Paper Weight: 115–500 g/m² Main Roller Pressure System: Pneumatic Minimal Sheets Size (w×l): 20×30 cm Maximal Sheets Size (w×l): 38x66 cm Maximal Performance: 2100 B3 / hod. Temperature Control: 80–140 °C, Warming Up Time 8 min Power Supply: 230 V AC, 50-60 Hz Power: 3150 W Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting Lasdpjxabugefx Agzjk * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Lajdsx I Itbspfx Agzsk Length approx. 6,000 mm

Condition: used, mileage: 401,670 km, power: 330 kW (448.67 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2025, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), HydroDrive, electronic braking system with ABS and ASR, PTO (power take-off), Active Brake Assist (ABA), Attention Assist, Traffic Sign Assist, Turn Assist, Lane Assist, Stability Control Assist, engine brake, hill start assist, rear axle differential lock, cruise control, ClassicSpace driver's cab, pre-installation and display for up to 4 cameras, air conditioning, auxiliary hot water heater, multifunction steering wheel, heated and electrically adjustable exterior mirrors, electric window lifters for driver and passenger doors, roof hatch, refrigerator, driver's comfort suspension seat, sleeper berth, central locking with remote control, automatic daytime running lights, fog lights, rotating beacon, tow hitch, hydraulic connections for semitrailers, combined aluminum tank approx. 390 liters diesel and approx. 130 liters hydraulic oil, AdBlue tank approx. 60 liters, air suspension with lifting/lowering function on the rear axle. Vehicle may have advertising adhesive film and/or lettering. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be pleased to provide an offer from our partner workshops. Vehicle may have advertising adhesive film and/or lettering. Our general terms and conditions of delivery and payment apply. Laodpfxjxqu Rco Agzjk We are happy to provide you with a financing or leasing offer for this vehicle. Please feel free to contact us!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Lsdox Irlhepfx Agzsak Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Lajdew Ryt Dspfx Agzek Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: good (used), Year of construction: 2017, functionality: fully functional, Vecoplan Shredder, Type VAZ 110, year of manufacture 2017, with hopper and extraction port. Manufacturer: Vecoplan Type: VAZ 110 Year of manufacture: 2017 Motor rated power: 18.5 kW Frequency inverter rated power: 22 kW Lajdpfx Agsx Iqryszjk Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20 mm Extraction port diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package with 20 mm screen, 1 set of tools, cutters and counter cutters, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Complete documentation including CE declaration is available. Inspections can be arranged at any time by appointment. On request, we are also happy to carry out test runs with your material for a handling fee. If you have any questions about the machine, we are available by phone Monday to Thursday from 08:00 to 14:00 h and Friday from 08:00 to 13:00 h. Please note: All technical data is based on manufacturer information. We do not accept liability for the information provided or any possible errors. All offers are subject to change, prior sale, and revocation at any time. Inspections can be arranged upon request. Sale is ex location, without warranty or guarantee.

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Laedpfxjpfcd Aj Agzok Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)