Used Bof for sale (89)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. Dusdpfx Asx Uzb Ejf Rju • Maximum workpiece weight: 800 kg • Tank length: 1195 mm • Tank width: 800 mm • Tank height: 400 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,350 kg, This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details. • Maximum electrode weight: 25 kg Duodpfx Afsylzi Nj Rou • Minimum power consumption: 5 kVA • Power: 7.5 kVA • Voltage: 400 V • Frequency: 50 Hz • Current: 10.6 A Additional equipment • Erowa zero-point clamping system on table (included) • Electrode holder: not included

Condition: used, Year of construction: 2007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 19,000 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, Charmilles Roboform 350 Year of manufacture: 2007 Dodjyzzblopfx Af Reuu Die-sinking EDM machine with C-frame design Fixed table with lowering tank Travel distances (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable tank height: 100–325 mm Generator hours: 6,337 h

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning Dodpoxrknmefx Af Rsuu - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 642576, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,522 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 500 mm, type of input current: three-phase, table length: 400 mm, overall weight: 2,350 kg, table load: 500 kg, For sale is a premium-quality die-sinking EDM machine from Charmilles, model Roboform 350. The machine is in excellent condition, both technically and visually. Technical specifications: Year of manufacture: 2006 Machine no.: 642576 Travel paths (X, Y, Z): 350 x 250 x 300 mm Table dimensions: 400 x 500 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Connected load: 7.5 kVA Current consumption: 10.6 A Voltage: 400 V / 3-phase / 50 Hz Machine weight: 2,350 kg Dimensions (L x W x H): 1,900 x 1,690 x 2,522 mm The scope of delivery does not include chucks or clamping devices; these can be offered separately on request. Transport and loading can be organized throughout Europe at an additional cost. Prices are subject to VAT. Dedpfx Aoykrckjf Rjuu Inspection is possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange is possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp Dujdsyhn Hgepfx Af Rsu

Condition: used, wire electrode, welding wire, welding wire Dodpfx Afod N Apvo Rjuu -Cored wire: Carbofil 1 -Diameter: 1.6mm -Price: per roll - Quantity: 2 pieces -Dimensions: O 300/100 mm -Weight per roll: 15 kg

Condition: ready for operation (used), functionality: limited functionality, power: 103 kW (140.04 HP), lifting power: 4,000 kg/m, lifting height: 7,000 mm, Year of construction: 2012, operating hours: 3,380 h, Equipment: all wheel drive, cabin, onboard computer, standard shovel, Telehandler MERLO P40.7 Turbofarmer Year of manufacture: 2012 According to hour meter: 3,380 hours Dodpfx Ajyg A Tljf Rsuu 4-ton lifting capacity 7-meter lift height 103 kW - Original paint - New tires - Including bucket Sales price: €25,900 net Affordable delivery available.

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :220 mm Djdpfx Asvyzgaef Rjuu Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm submerged

Condition: used, Year of construction: 2007, operating hours: 128,688 h, functionality: fully functional, machine/vehicle number: 642672, 128,688 h active time (total time the machine was switched on) Djdoym N Naepfx Af Rouu 21,821 h operating time (net time in which the machine was actively used)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg Dsdpfx Afjxqn Ibs Reuu EQUIPMENT Workshop drawer cabinet Documentation

Condition: used, Year of construction: 1994, EDM machine Charmilles Robofil 2020 and 4020, year of manufacture 1994 and 1996 Djdsyq R Tbepfx Af Rsuu

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Dedow Ucyuspfx Af Rsuu Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. Dsdpfx Afexx Awgs Reuu The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 935089, - Water bath machine with automatic wire threading - Closed diamond wire guides for different wire diameters - Collision protection on all 5 axes (ICP) - Pictured clamping accessories included TECHNICAL DETAILS travels X / Y / Z: 550 / 350 / 400 mm travels U/V axis: 550 / 350 mm Conicity: max. +/- 30° at 400 mm height workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) workpiece weight: max. 1500 kg Surface quality: max. Ra 0.22 μm Cutting speed: max. 300 qmm/min Available wire diameters: 0.15 - 0.30 mm Control: Charmilles Millenium with Windows operating system (12"-TFT touch screen). MACHINE DETAILS Duedslru Rbopfx Af Reu dimensions (length x width x height): 2600 x 2810 x 2240 mm net weight: 3300 kg supply voltage: 400 V / 3 phases / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm Dsdpon Arnxsfx Af Rjuu work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Year of construction: 2004, condition: ready for operation (used), A CNC die-sinking EDM machine Charmilles without counter is available. Travel path X/Y/Z: 350mm/250mm/300mm, C-axis: 360°, tool positions: 4, quill stroke: 300mm, table dimensions X/Y: 500mm/400mm, max. workpiece weight: 500kg, max. workpiece dimensions X/Y/Z: 780mm/550mm/370mm, surface quality: approx. Ra 0.1µm, max. electrode weight: 50kg, tank usable volume: 160l, total tank volume: 410l. Machine dimensions X/Y/Z: approx. 1900mm/1700mm/2550mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible. Djdpeympddofx Af Rsuu

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Duodpfx Aoylkr Tsf Rou

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, Automatic Rear Loading 6500 - Unloading 6500 - Round tube min 16 mm max 225 mm - Square tube max 160x160 mm - Rectangular tube max 200x100mm Dujdpsr Iz Slofx Af Rou

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Dusdpfx Aow Ad Idof Rsu

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Duodpeuqackjfx Af Reu

Year of construction: 2011, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2kW, including documentation. Dujdpfeibdpyex Af Reu

Condition: used, TECHNICAL DETAILS - Centrifugal filtration system - Contaminated fluid capacity : 2000 [l] Duodpfxjw H Dv No Af Rou - Clean fluid capacity : 350 [l] - Machine floor space : 2700 x 1440 x 2850 [mm] - Machine weight : 1610 [kg]

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Dodpoxlhudofx Af Rouu

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Dujdpfxeya Efws Af Rsu Table dimensions: 560 mm x 320 mm MACHINE DETAILS Control: Charmilles Weight: 3,500 kg