Used Bof for sale (95)

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Bwedpfxjuqacke Afpjh

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Bodpfx Aew S Tygjfpewh

Year of construction: 2011, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2kW, including documentation. Bwodpoibdpyjfx Afpsh

Condition: used, TECHNICAL DETAILS - Centrifugal filtration system - Contaminated fluid capacity : 2000 [l] - Clean fluid capacity : 350 [l] - Machine floor space : 2700 x 1440 x 2850 [mm] Bjdpow H Dv Nofx Afpewh - Machine weight : 1610 [kg]

Condition: used, first registration: 09/1994, Year of construction: 1994, DOLL BOFA Belzig timber trailer with EXTE bolsters ! robust main frame ! • 3 x BPW 8 t - ECO - Plus axles • air suspension • lift axle Bwsdpewmpmgjfx Afpeh • ABS • LED work lights at the rear • Overall length: 12,500 mm • Width: 2,500 mm • GVW: 34,000 kg • Unladen weight: 6,400 kg • 8 x extendable EXTE bolsters • Steel / aluminium • Tyres: 385/65 R 22.5 - TÜV / main inspection / safety inspection: new! - German trailer! Errors and prior sale excepted!

Condition: ready for operation (used), functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 650 kg, fuel type: gasoline, color: orange, fuel: super 95, Year of construction: 2009, operating hours: 1,123 h, Remote-controlled caterpillar mower: - Niko - Roboflail One - Year of manufacture 2009 - 1,123 operating hours - 650kg - 170cm x 180cm x 110cm (lxwxh) - max gradient: 70% - 2-sickle mower - 25hp Kawasaki engine - Radio remote control (range 300m) - Municipal machine from 1st hand Bwsdstt N Ucopfx Afpoh Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. ✅ Capacity up to 800 l/h ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations Bedoxl Hpmjpfx Afpowh ✅ Reliable German manufacturer In very good condition.

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 Bwedpfjwz Iuxex Afpjh - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press Bwjdpfx Afsxbm Uzjpjh 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: ready for operation (used), Year of construction: 2004, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2004990105, total width: 3,710 mm, total length: 21,000 mm, total height: 1,000 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 3,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled in 2021 (replacement of valves, suction cups, and cylinders) and has been operated for less than 300 hours since then! TECHNICAL DETAILS Maximum glass sheet size: 6 m x 3 m MACHINE DETAILS Control type: CNC control Dimensions & Weight Dimensions (L x W x H): 21,000 x 3,710 x 1,000 mm Total weight: 5,500 kg Input power type: Three-phase current Total operating hours since overhaul: < 300 hrs. EQUIPMENT Glass breaking table Control computer Bwodsw Sk Axjpfx Afpoh Additional computer with optimization software (optional to include) Grinding device for Low-E coatings

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Bjdjv Tpnropfx Afpswh Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm Resolution: 0.0001 mm Tank size: 1,220 x 870 x 470 mm Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Bwedpfxjv Tnm Ho Afpoh Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Bodpfxjv Ul I Ds Afpewh Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.)

Condition: used, functionality: fully functional, HOMAG HSK F63 CORNER ROUNDING AND END TRIMMING UNIT Bedpsvu A D Njfx Afpjwh Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully operational - Compatible machines: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - If interested, we offer an overhaul service, contact us. Weight and transport dimensions: 10KG 46X39X27 CM

Condition: used, functionality: fully functional, Ferwood code: AGG0188 - Manufacturer code: 2-056-11-3020 - Condition: Used - Functionality: Fully operational - Compatible machine: CNC HOMAG BOF - HOMAG BAZ - WEEKE VENTURE - BHC - CENTATEQ - If interested, we offer an overhaul service, please contact us. Weight and transport dimensions: 8 kg, 46x39x27 cm. Bedpfx Afjvu Tqtjpewh

Condition: used, functionality: unexamined, Ferwood Code: RU0000078 - Manufacturer Code: 5816 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC IMA BIMA - HOMAG BAZ - HOMAG BOF - WEEKE VENTURE - WEEKE BHC - WEEKE BHP/BP - If interested we offer a revision service, contact us. Bjdpfx Afjv Azgfspowh

Condition: used, functionality: fully functional, Ferwood Code: RU0011480 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC WEEKE VENTURE - WEEKE BHC - HOMAG BOF - HOMAG BAZ - HOMAG CENTATEQ - If interested we offer an overhaul service, contact us. Bwsdpfx Aev I A Rpjfpjh

Condition: new, Year of construction: 2024, functionality: fully functional, RÖDER Profile Drilling Machine PBA 3000 NC with 2-axis positioning control Heidenhain Positip 8016 active for x- and y-axis and drilling unit Optimum MH35V Year of manufacture: 2024 For rational and efficient drilling of beams, profiles, tubes, and other long workpieces Technical Data: Max. travel distance x-axis: 3000 mm Max. travel distance y-axis: 250 mm Max. travel distance z-axis: 350 mm Max. support length: 5700 mm (by means of extendable support rollers) Max. support weight: 500 kg Standard Equipment: 3 pcs. mechanical vices Röhm BOF 4 Max. clamping width: 220 mm Clamping width: 160 mm Jaw height: 50 mm Drilling unit Optimum MH35V Technical Data: Bwjdpjx E Sytsfx Afpoh Motor: 1.5 kW, 400 V Drilling capacity in S235JR: ø 32 mm Continuous drilling capacity in S235JR: ø 28 mm Tapping mode: Yes Spindle taper: BT 30 Spindle stroke: 90 mm Gearbox: Two-stage industrial motor and additionally 6 gearbox speeds Speed range: 220 – 3100 rpm Gear head: swivels +/- 30° Minimum quantity lubrication equipped with micro-dosing pump, pneumatic frequency generator, 6 mm push-in fitting for pressure supply/device control; 75-litre PE fluid tank, nozzle feed line D8 mm, length 2000 mm, plastic link nozzle G1/8" with holder D12 x 30 mm, nozzle tip made from aluminium Optional, available at extra cost: Pneumatic tapping unit M3 – M12; integrated on PBA 3000/6000, pneumatic, with flexible arm, Speed 400 rpm Working area: Radius 100–950 mm, 6 pcs. quick-change inserts M4, 5, 6, 8, 10, 12; including linear guide, adapter, pneumatic connection and maintenance unit Subject to prior sale. No liability for typographical errors and mistakes.

Condition: used, functionality: fully functional, machine/vehicle number: 2-017-95-2630, Motor spindle for CNC machine Weeke BOF and BAZ. - Available 7 pcs (in that quantity 2 pcs with C axis); Bedpfxoxnbmfe Afpewh - 12000 - 24000 Rpm; - 16kW - HSK 63

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 607-9027, PROFILE DRILLING MACHINE PBA 3000 for the rational and efficient production of holes in beams, profiles, tubes and other long parts Bjdordx A Sspfx Afpjwh Technical data: Max. Max. travel x-axis 3000 mm, Max. Max. travel y-axis 250 mm, Max. Max. travel z-axis 350 mm, Max. Support length 5700 mm (due to extendable support rollers), Max. support weight 500 kg 3 pcs. mech. vices Röhm BOF 4: Clamping width max. 220 mm, clamping width 160 mm, jaw height: 50 mm; Digital position indicator (accuracy +/-0.1 mm); Stop points: 10 pieces Drilling unit Maxion Unimax 3T AV Technical data: Motor 1.5 kW, 400 V Drilling capacity in St 37 ø 35 mm Continuous drilling capacity in St 37 ø 26 mm Thread cutting in St 37 M16 Spindle holder MK 3 Spindle stroke 125 mm Speed range max. 3200 min-1 Automatic height adjustment z-axis Minimum quantity lubrication Pneumatic thread cutter M3-M12 Subject to prior sale. No warranty for misprints and errors.