Used Brenta for sale (9)

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. Kedpfx Anoyxhq Uoyjdn This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos Kdodpfx Aezbtq Rjnyjn

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment Kodpfx Anevw Rnbsyodn

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder Kjdpfxswh U Dmj Anyjdn  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Year of construction: 2004, condition: good (used), LBL Brenta Spaner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Free central blade, overheating protection Clearance = 800 mm Fast, precise positioning via servomotor with electrical system. Kjdpfx Anjyuc Nieyedn

Condition: excellent (used), Year of construction: 1984, I sell the vertical band saw Brenta Paril. Condition very good. Available immediately. Kdsdpfxswinkce Anyjn

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Kdodpfsx Ndphjx Anyen Mechanical roller conveyor with chain drive

Condition: used, Year of construction: 2006, For sale: LBL Brente log transport wagon with debarker – year of manufacture 2006 Kodpex Ndpbefx Anyodn We will be selling a complete series of machines from a sawmill. This is the first machine from this lineup – keep a close eye on our website for additional offers. Dimensions and technical specifications can be found in the PDF documents.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover Kodocudizepfx Anysdn startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.