Used Chips Cutter for sale (7,261)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Djdpfsyu Nqmsx Apwskr Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Year of construction: 2019, condition: used, machine/vehicle number: 23467, Performance: 25/35 kVA, control system: SIEMENS Simatic HMI, consisting of: 1 swarf transport car tilting device from ELIAS ENGINEERING, load capacity: 500 kg, 1 shredder ELIAS ENGINEERING FS 600, 1 pre-cleaning unit ELIAS ENGINEERING KSS-RA, 1 post-cleaning unit ELIAS ENGINEERING 23468-4, 1 storage tank ELIAS ENGINEERING 23468-6, 1 swarf distribution device ELIAS ENGINEERING TTS 600, load capacity: 150 kg, with rail system, control system, and steel enclosure. Dkjdpfxjzqy R Us Apwsr

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Dodpfx Aszpygyspwskr

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm Dksdpfx Apodzp T Tswjr - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dkodpfevvi Iqjx Apwjr

Condition: ready for operation (used), Year of construction: 2001, total length: 3,600 mm, total height: 1,300 mm, conveyor belt width: 320 mm, delivery head: 1,000 mm, ejection height: 1,000 mm, conveying length: 1,900 mm, conveyor belt length: 1,900 mm, installation height: 180 mm, Knoll 240 S-1 chip conveyor for sale Good condition. Installation width: 320 mm Dkjdpfxsyxxf Ns Apwjr Conveyor belt length up to discharge: 1900 mm Conveyor height: 180 mm If you have any further questions, we are at your disposal.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: Dsdpfx Asif Ek Ropwjkr • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers Dkedsfnlkwopfx Apwor • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: ready for operation (used), A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible. Dsdezta Ewspfx Apwokr

Condition: ready for operation (used), Coolant cleaning system / filter chip conveyor RD 3 C-012 - Year of manufacture: 2003-12 - Chain model: C2060H 8 LA2 - Number of links: 137 links Dsdpoztdyfsfx Apwskr - Configuration: LEFT x 2 (double strand) - Filter model: C-012-SP4 - Width/Specification: 80 (mm/Type) - Drive: Electric geared motor (at the top of the discharge) - Safety: Emergency stop switch mounted on the housing - Accessories: Integrated coolant tank with level indicator and overflow protection L x W x H: 2.6 x 1.0 x 1.6 meters / Weight: 550 kg

Condition: used, Year of construction: 2002, This listing is for a Stephan VM 60 industrial mixer, designed for heavy-duty mixing applications. The machine features a large stainless steel conical hopper with a hinged lid that includes locking handles for secure closure. The mixing bowl is double-walled, which allows for both heating and cooling during operation, enhancing process flexibility. The interior of the mixing bowl is equipped with mixing blades and paddles, designed to ensure thorough mixing of materials. The mixer is operated via an electric motor mounted below the mixing bowl, accompanied by a control box located on the side of the machine. The control panel includes buttons, a display screen, and a safety emergency stop button, providing user-friendly and safe operation. Hydraulic or pneumatic piping is connected to the machine, and the hood opens hydraulically with an in-built hydraulic aggregate, facilitating easy access for loading and cleaning. The machine is designed to be emptied by tilting, which aids in efficient discharge of mixed materials. Scrapers are installed to assist in mixing and cleaning processes. Temperature control is also part of the machine's features, supporting precise process management. The equipment shows signs of use, with some dust, dirt, and minor rust visible on the floor and certain components, including the motor housing and hydraulic connections. However, the mixing bowl interior appears clean and well-maintained. The control panel's interior wiring and electronic components are intact with no visible damage. The machine is currently secured with green straps on a pallet, indicating it is prepared for transport or storage. Please note that this model does not include a built-in vacuum device; such a system would need to be installed separately if required. Overall, the Stephan VM 60 is a robust industrial mixer suitable for applications requiring controlled temperature mixing and hydraulic operation. Walls: Double Dkedpezqcpajfx Apwsr Heating: Through the Wall Product Pump: Yes Ingreediant infeed: Yes Skid Mounted: Yes Controls: HMI PLC Condition: Excellent Available: Immediately

Year of construction: 2020, condition: new, The root cutter is equipped with 9 hardened, reversible cutting inserts that can be rotated multiple times when they become dull. The inserts have a long service life. There are inserts with 3 different cutting edge angles to optimally process different types of wood. You can also use the cutter to mill out flower boxes or perform other milling operations. Dsdpfxodf Sd Sj Apwskr Article number: MT18-WF300

Condition: used, The Seydelmann K60U is an industrial bowl cutter designed for cutting, chopping and mixing meat and other food products. Equipped with a 60-litre stainless steel bowl and six knives, it ensures efficient product processing and consistent results. Its stainless steel construction provides excellent durability, easy cleaning and high hygienic standards, making it suitable for professional food processing applications. Technical Specifications Manufacturer: Seydelmann Djdpfxjzq Sqmo Apwjkr Model: K60U Type: Bowl Cutter Bowl Capacity: 60 L Number of Knives: 6 Bowl Material: Stainless Steel Knife Material: Stainless Steel Power Supply: 400 V / 50 Hz / 3N Installed Power: 22 kW Dimensions (L × W × H): 1000 × 1400 × 1300 mm

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT Dedpfx Apownidhjwekr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake Dedpfx Aszph N Aspwokr – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Dsdpfjzna S Hsx Apwjkr Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Dkedpfxsyx I Dus Apwsr

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Dsdpfx Aszd Tg Aspwokr Location: Nattheim.

Condition: ready for operation (used), functionality: fully functional, Delta TTA 550 pallet block cutter Dsdpszkt R Ujfx Apwekr Operating

Condition: used, functionality: fully functional, STORTI Package Cutter: Dkjdpfx Apjxt Iu Hswjr Machine in working order. - Fixed base with 3 movable stops for squaring packages - Waste conveyor belt at the base, recently replaced - Mobile cutting unit with geared motor and inverter

Condition: ready for operation (used), functionality: fully functional, Storti QGS 77/1 block cutter With 3 meter block extraction belt Dodpfxezkubbj Apwjkr Operating

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Dsdpfx Aporwz I Aewokr

Condition: excellent (used), NNP Cheese block cutter Dkjdpfxowtilps Apwsr Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h,

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Dkjdjd Dy S Repfx Apwer Protection class: IP-55

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Dkjdpfxjdqzcxs Apwor Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -