Used Cnc Slant Bed Lathe for sale (17,408)

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control Kdsdpfx Aoq Npqmjb Ujw 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads Kodpfxjwcfgbs Ab Usdw 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW Kedowwar Iepfx Ab Ujdw

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken. Kdedpfx Abov Sfk He Ujw

Condition: used, Year of construction: 2000, machine/vehicle number: 202000, Hegenscheidt MFD 7893 CNC Deep Rolling Machine max length 920mm, max radius of counter weight (deending on dtroke and bearing width) 195 - 270mm, max 8 main + 6 pin bearings, min/max main bearing dia 33 - 88mm, min/max pin bearing dia 30 - 84mm, max bearing width 18,5mm, max stroke 140mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13to Ksdpfx Absxxylue Ujdw

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Kdodpfx Abjxxxbzj Uew Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, INDEX ABC65 CNC Lathe Year of manufacture: 2007 Control: Siemens 840D On-time hours: approx. 62,000 h Spindle hours: approx. 49,000 h Main spindle: 65 mm Turret: 2 Tool holder: VDI25 Back boring stations: 5 Bar loader: Index MBL Chip conveyor: Knoll high-pressure system Kdjdpfx Abewi Ur Ho Uow Coolant system with belt filter Contact us for more photos

Condition: used, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm Kjdpfx Asxyaf Rsb Ujdw

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details turning diameter 600 mm turning length 2000 mm control Siemens 840 D powerline main spindle speeds: 2500 1/min. total power requirement 72 kVA weight of the machine ca. 12 t Additional information 2-axis CNC universal lathe Equipment: Kdedpfx Aexx R D Ijb Usw Siemens Sinumerik 840 D powerline CNC control Tailstock 12-station turret SMW AUTOBLOK steady rest Power chuck SMW Autoblok KNCS-N-400-128 Chip conveyor IFS oil mist extraction system

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, Kjdpexv Tf Nefx Ab Uedw 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: like new (used), Year of construction: 2018, operating hours: 598 h, functionality: fully functional, The HARDINGE GS42 is a CNC lathe designed for precision turning of hardened surfaces. Reason for sale: Order was lost before full production commenced. ONLY 598 operating hours Control: FANUC Oi-TF Max. turning diameter: 284 mm Max. swing diameter: 457 mm Max. spindle speed: 6,000 rpm Spindle bore: 42 mm Turret with 12 stations (VDI 30) Kedpfoxx Rgiox Ab Ujdw (non-driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle chiller - Heat exchanger for motor and spindle. High-pressure coolant system, cooling through turret (20 bar) Live high-performance tailstock VOP40P complete system (precision measuring probe)

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Kdedpfsxxh N Uox Ab Ujw Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Kdedjvnf Rfspfx Ab Ujw Cut Steel Standard tooling included

Condition: used, Year of construction: 1989, turning diameter 165 mm turning length 200 mm control Fanuc total power requirement 13 kW Kdedpfx Aexyagnjb Uew weight of the machine ca. 1,7 t

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING Kedpfx Aev I Tx Reb Ujdw SWARF CONVEYOR MANUALS

Condition: good (used), Year of construction: 1999, operating hours: 42,733 h, functionality: fully functional, machine/vehicle number: 01500001111, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 70 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 8 rpm, overall weight: 3,200 kg, Completely overhauled by Gildemeister Bielefeld in 2010 Turning diameter: 500 mm Swing over cross slide: Ø 290 mm Kdsdpfxsxx Uqro Ab Uew Turning length: 1,500 mm Spindle speed range: 8 – 2,800 rpm with three gearbox stages Spindle bore approx. Ø 70 mm Three-jaw chuck Ø 250 mm, Röhm Tailstock quill: MT4

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm Kjdpfx Ajxxb A Ujb Uodw 104 mm 400 mm 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Condition: excellent (used), TSUGAMI-MORI BS32CE(S)-V is a CNC automatic lathe (CNC Swiss type) engineered for precision, high accuracy and reliable production. Working capacities: 7 axes, 2 spindles; max turning Ø 8–32 mm, max length 250 mm; drilling up to 12 mm, threading up to 10 M. Key specs: main spindle 200–7000 t/min, back spindle 200–6000 t/min; driven-tool speeds 200–5000 t/min; spindle motor 5.5 kW, back spindle 2.2 kW; feeds 1–6000 mm/min, rapid 20 m/min; 4 stations, 20 tools, 5 driven tools; weight ~2800 kg, size 2150×1500×1800 mm, air 5 bar. Accessories: LNS Express 332 bar loader (up to 3000 mm, Ø 3–32 mm), parts catcher, lamp, oil‑mist extractor, collet set, RS232 interface, status light. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical. Ksdpfx Aoxx U Udjb Usdw

Condition: used, Year of construction: 2011, AXE AND STATUS TUSCAN LL-950 X 3000 HEAVY DUTY CNC LATHE MAKE TUSCAN, MADE IN TAIWAN MODEL LL-950x3000 YEAR 2011 CONTROL FANUC Oi-TD TURRET 12 STATION MAXIMUM CUTTING DIAMETER 950.0 mm CENTRE HEIGHT 575.0 mm DISTANCE BETWEEN CENTRES 3000.0 mm SPINDLE NOSE A2-15 SPINDLE SPEED 9 – 500 RPM SPINDLE CENTRE MT # 6 SPINDLE POWER 30 / 37 Kw TOOL SIZE 32.0 mm TRAVERSES X AXIS: 480.0 mm Ksdpoxvclrofx Ab Ujdw Z AXIS: 3000.0 mm RAPID TRAVERSES X AXIS: 5M / MIN Z AXIS: 4M / MIN TAILSTOCK YES PLUS TWIN SWARF CONVEYOR 4 JAW CHUCK 3 X STEADIES FULLY FUNCTIONAL FULL SET OF MANUALS TURRET TOOLING

Condition: good (used), Year of construction: 2001, operating hours: 16,930 h, functionality: fully functional, machine/vehicle number: 01160012601, turning diameter over cross slide: 420 mm, turning length: 635 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, Heidenhain EP 4290 TP Kodjxx Upbspfx Ab Usdw CNC single-spindle lathe with controlled tailstock Gildemeister CTX400 Series 2 V3 Swing diameter over bed cover: 570 mm Swing diameter over cross-slide cover: 420 mm Cross travel: 220 mm Longitudinal travel: 635 mm Speed range: 25–5,000 rpm Spindle bore approx. Ø65 mm Chuck Ø 250 mm, by Berg Three-jaw chuck, hydraulically adjustable with various interchangeable jaws Tailstock with 550 mm travel Tailstock quill MK4

Condition: excellent (used), TORNOS DT 26/5 is a CNC automatic lathe for precision, high accuracy and reliability. 5+2 axes, 2 spindles, max workpiece length 195 mm, bar ø25.4 mm; 2 tool-holders, 22 stations, 4 turning/4 drilling tools. Spindle 0–10,000 rpm, 8.2 kW (back spindle 8.2 kW); driven tools 5,000 rpm, 1 kW. Rapid traverse 32 m/min; weight ≈2400 kg; L2912×W1300×H1720 mm. Accessories: bar loader Top Automazioni, high‑pressure coolant 20 bar, central lubrication, status light. Achieves tight tolerances; sectors: automotive, watchmaking, toolmaking, aerospace, medical. Kedexx U Spspfx Ab Ujdw

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS Kedpfx Abep T Ulzo Uodw B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: used, STAR SV 32 is a CNC automatic lathe built for precision, high accuracy and reliable production. Capacities: max turning Ø 32 mm, max turning length 300 mm, max threading Ø 12 M, max tapping length 150 mm, collet taper F37. Main specs: spindle 5.5/7.5 kW, speeds 280–7000 t/min (stepless), back spindle 2.2/3.7 kW 280–7000 t/min, rapid traverse X/Y 15 m/min, Z 18 m/min, supply 3x 380 V 50 Hz, air 5 bar; weight ~3800 kg; dimensions 2645×1405×1680 mm. Accessories: bar feeder IEMCA BOSS 338/32, 180 l coolant, set of collets, toolholder set, parts catcher, conveyor belt, tool cabinet, central lubrication, fire extinguishing system, status light, spindle blow-out (backspindle). Achieves tight tolerances; typical for automotive, watchmaking, machine tools, aerospace and medical. Kdsdpsxx U Scjfx Ab Ujw

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm Kdjdpoxp Nfxsfx Ab Ujw TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) Kdodpfjxnpp Isx Ab Ujw SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER