Used Cnc Vertical Turning Machine for sale (66,947)

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Hjdpfsxnpbqsx Ad Refg Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Hedjwym Nfepfx Ad Rsfg Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm turning height: 275 mm x-axis: 925 mm z-axis: 250 mm Hjdevb Dq Dopfx Ad Rofg clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Hfedpfx Adeymz D Ne Rsg Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Hfjdpfxsq T I Ize Ad Rog Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Hfsdpfoglf A Hjx Ad Rog Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, Technical details: Hodpjquy Iusfx Ad Refg swing diameter: 200 mm weight of the machine ca.: 15 t Distance between tips: 832,5 mm turning length: 380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers *

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. Hfedpfevxuc Eex Ad Rsg The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2002, Technical details: Hfsdpfsr Dwpmjx Ad Rsg turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Available from 01.08.2024 *

Condition: used, Year of construction: 2015, turning diameter 300 mm swing diameter 300 mm turning height 300 mm Control Eckelmann x-travel 300 mm z-travel 300 mm y-travel 300 mm spindle turning speed - stepless 5000-80000 U/min main drive 1,2 kW hollow 670 x 510 mm total power requirement 8 KVA weight of the machine ca. 14 t Hsdsx Hpzqspfx Ad Rjfg dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical polishing machine. Control: Eckelmann

Condition: used, Year of construction: 2018, turning diameter 380 mm swing diameter 380 mm turning height 200 mm Control S 840 DSL x-travel 1700 mm Hfedpex Hpzkjfx Ad Rsg z-travel 370 mm spindle turning speed - stepless 0- 6000 U/min main drive 26 kW feed in x - axis 0- 50 m/min feed range Z-direction 0- 35 m/min turret (x-stations) 12 Pos. total power requirement 36 kW weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical turning center with ATC. Control: Siemens 840 DSL

Condition: used, Year of construction: 2018, turning diameter 380 mm swing diameter 380 mm turning height 200 mm Control S 840 DSL x-travel 1700 mm z-travel 370 mm spindle turning speed - stepless 0- 6000 U/min main drive 26 kW Hjdpfxox Hpy Ts Ad Refg feed in x - axis 0- 50 m/min feed range Z-direction 0- 35 m/min turret (x-stations) 8 Pos. total power requirement 36 kW weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical ring turning center with ATC. Control: Siemens 840 DSL

Condition: used, Year of construction: 2018, turning diameter 380 mm swing diameter 380 mm turning height 200 mm Hfedox Hpy Hepfx Ad Reg Control S 840 DSL x-travel 1700 mm z-travel 370 mm spindle turning speed - stepless 0- 6000 U/min main drive 26 kW feed in x - axis 0- 50 m/min feed range Z-direction 0- 35 m/min turret (x-stations) 8 Pos. total power requirement 36 kW weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical turning and grinding center with ATC. Control: Siemens 840 DSL

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Hfodpfeia Rtdsx Ad Rjg Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M. Hfodpfxjtufb Sj Ad Rog

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Hedev H Dgpepfx Ad Rofg

Year of construction: 2012, condition: ready for operation (used), A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible. Hsdsv Ubqhopfx Ad Refg

Condition: ready for operation (used), Year of construction: 2000, A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible. Hfjdpowtg Hkefx Ad Rjg

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/600mm/630mm, table dimensions X/Y: 1150mm/600mm, max. table load: 700kg, rapid traverse: 20m/min, speed: 10000rpm, tool positions: 24, machine dimensions X/Y/Z: approx. 2950mm/2650mm/2850mm, weight: approx. 5300kg, control: Mitsubishi Meldas. On-site inspection is possible. Hfodewxd U Njpfx Ad Rjg

Condition: ready for operation (used), Year of construction: 2009, Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible. Hjdpfxjxrui Ie Ad Refg

Condition: ready for operation (used), Year of construction: 2000, A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible. Hsdsyhgpgspfx Ad Rofg

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Hfedpfx Aev Uqb Ned Reg

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Hfsdpfx Adou T Rgqs Rog

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible. Hfjdpfx Astx Dpfed Reg

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Hodpfxjvriq Re Ad Rofg