Used Collet for sale (855)

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm Pjdpfx Afoyz Dg Ds Aora table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, overall weight: 1,750 kg, bar passage: 20 mm, Equipment: documentation/manual, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] INCLUDED EQUIPMENT: x1 sliding headstock (direct drive) x1 counter spindle (direct drive) x1 rotary guide bush (direct drive) Prodpfx Afey Eff Aj Asa x108 collets x7 live tool holders x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 oil mist extraction unit, 3nine LINA type x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 set of accessories for IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light x1 set of IEMCA manuals x1 set of FANUC manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines.

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Podpfx Afjy E T A Ao Aera Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Podpfx Ajyzigcjf Aora Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Pjdjy Nfqmepfx Af Ajra Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Prodpfx Afozfau Ae Asa Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: used, Hand revolver lathe: GDW Type/Model: RD 250 Condition: Used Center height: 125 mm Distance spindle nose – revolver head max.: 400 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: 128 mm Spindle head DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet bore: 26 mm Continuously variable up to: 60-3,000 rpm Frequency-controlled AC motor 100% ED, 70 Hz: 4.6 kW Revolver slide travel: 100 mm Cross slide travel: 90 mm Revolver tool holder: 6 x 3/4" Length x Width x Height: approx. 1300 x 700 x 1,400 mm Weight depending on equipment: approx. 520 kg Connected power: 9 kW Prsdpfx Afjzcb Ruo Asa Equipment: -Vibration-damped direct drive to the main spindle, continuously variable with magnetic brake for the main spindle and spindle stop in case of emergency stop -6-position inclined revolver slide with Ø ¾" tool holders -Continuously variable feed rate adjustment -For revolver slide with feed drive -Collet chuck (pneumatically operated) -Extensive collet set -Emergency stop button -Coolant system -Spindle guard

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Pjdpozcd Hlefx Af Asra Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts Pedszbc Dtepfx Af Ajra - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments Pjdszg U Efepfx Af Asra >> Spindle stop for collets >> Mulifix size A with 3 steel holders >> 3 drill chucks >> Coolant system About the machine: Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available. Prsdpfx Afjy Rpr Ro Aja

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 19800 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 Prsdpeyycwxjfx Af Aea 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, number of axes: 6, This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details. • Condition: Demo machine • Running hours: 173 hMachine configuration • Twin turret configuration • Y-axis on both turrets • Sub-spindle included • Main spindle + sub-spindle complete machining • Twin turret simultaneous machining • Dual Y-axis capability • High productivity turning center • Bar work compatibleControlled axes • 9 controlled axes • X1 / Y1 / Z1 • X2 / Y2 / Z2 • C1 main spindle • C2 sub spindle • A-axis (sub spindle movement)Axis travels • Upper Turret (X1 / Y1 / Z1) • X1 travel: 190 mm • Y1 travel: 90 mm (±45 mm) • Z1 travel: 660 mm • Lower Turret (X2 / Y2 / Z2) • X2 travel: 160 mm • Y2 travel: 90 mm (±45 mm) Prodpfxoy Ex E Aj Af Aoa • Z2 travel: 660 mm • Sub-Spindle (A-axis) • A-axis travel: 660 mmMain spindle • 3-jaw chuck: Kitagawa BB206 • Collet chuck: SMW PPBE-42Sub-spindle • 3-jaw chuck: Kitagawa B206 • Collet chuck included (SMW)Machining features • Driven tools included • Simultaneous upper + lower turret machining • Turning / milling / drilling in one setup • Front and back side complete machining • Part transfer between spindlesCoolant / functions • High pressure coolant: 9 bar • Abnormal load detection function • Raku-Raku monitor controller optionIncluded tooling • Static toolholders included • 2 pcs axial rotary toolholders Additional equipment • Bar feeder interface • Remaining bar discharge device • Workpiece unloader with conveyor • Chip conveyor included • Manual tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) Predex D Dx Ajpfx Af Aja • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: ready for operation (used), Deckel SOE Graver Grinder Largest collet bore: 17.5 mm Largest grinding length: 90 mm Largest grindable angle: 180° Largest grindable radius: 10 mm Coarse adjustment: 100 mm Fine adjustment: 15 mm Dividing head support pivoting: 90° Coarse adjustment of dividing head slide: 40 mm Fine adjustment of dividing head slide: 12 mm Height from pipe guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The phone number is located at the very bottom of the item page in the seller's imprint/legal information. Podpfev T T Ivsx Af Aora Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. The assembly and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical specifications and errors in the description of the item may occur and are reserved. Shipping is only available to businesses - for private consumers, only pickup is possible.

Condition: good (used), Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet -Thread cutting head: self-opening thread cutting head -Type: CH7-44 -Image: M48 -Collet: Ø 25 mm Prsdpfjv Uw Amsx Af Asa -Dimensions: 330/210/H135 mm -Weight: 17.4 kg

Condition: new, Special price including shipping within Germany (excluding islands) While supplies last Technical data: Drill diameter: 3 - 13 mm Predpfxod R A Dcs Af Aea Point angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.18 kW Weight, approx.: 8.1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for sharpening HSS/carbide spiral drills - Safe operation due to forced guidance of the grinding process - Point angle adjustable from 90° to 140° - Compact design, with collet storage in the machine and a handle for quick storage - Includes a pointing device to reduce feed force - Device for back-grinding the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 11 ER 20 collets, 3 - 13 mm - ER 20 collet holder

Condition: used, drill chuck, keyed drill chuck, collet chuck -Manufacturer:Triangle Brand, Drill chuck keyed drill chuck holder MK2 Psdpeux Salofx Af Aera -Type: JS16 -Clamping range: 2-16 mm -Dimensions: Ø 56 x 158 mm -Weight: 1.0 kg

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, The machine is as good as new. It is equipped with an ELBARON sanding mist extraction system. The machine can also be supplied without this device on request. The package includes collets for all standard diameters up to 20 mm. Complete description and installation manual. An original spare spindle is available on request. So there is no waiting time for spindle maintenance. Prjdpfx Afst Dykne Aja English: The machine is in mint condition. It is equipped with an ELBARON grinding mist extraction system. On request, the machine can also be delivered without this device. The package includes collets for all common diameters up to 20 mm. Full description and installation manual. An original spare spindle is available on request. So there are no waiting times for spindle maintenance.

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Prsdpfeq A Icqsx Af Aja

Condition: good (used), Support milling motor RUWO Weitmann Mod.SFE 20/G3 Prjdpfx Afottk U Eo Asa 4 milling spindle speeds Motor 380 Volt 2800/1400 n1/min. 0,55 / 0,44 kw Accessories : 5 collets : 5-6-10-12-16 mm Transport dimension : L.500 mm W.250 mm H.350 mm Weight 48 kg

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc. Pjdpfx Afjtff Ane Aera

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox Podpsb T Ti Esfx Af Ajra -Multi-spindle head -Number: max. 2x drill bits/milling cutters -largest hole pattern spacing: 42 mm -Top opening: Ø 45 mm -Built-in collets: Ø 16 mm -Multi-spindle heads are variable tools -for various machining operations such as drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 120/110/H220 mm -Weight: 5.6 kg

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Psdpfxod Hr Imo Af Asra Spindle servomotor External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Mill holders: SK50 23 pieces with tool holder and accessories -Type: various designs, see photos -Price/delivery: complete Predpektm Evefx Af Asa -Total dimensions: 600/600/H770 mm -Weight: 152.5 kg