Used Concentricity Tablet Press for sale (12,545)

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply. Itsdpjz Tf Enjfx Ap Den

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Itsdpew Sgnkefx Ap Djn Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Ijdpfoy D Abfsx Ap Dstn Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Iedpfez Tdbhjx Ap Detn Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: used, Year of construction: 1992, machine/vehicle number: 56979, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, pressing force: 135 t, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 7,500 kg, machine is functional ok, from down linear tool is one channal damage. Isds Aarbhopfx Ap Dstn perfect machine for starters or when a company have only periodic press jobs. we sale out by fact that we need the space. machine is unther still on power

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Ijdpfx Apezxwypj Djtn Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2013, machine/vehicle number: 201364, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 86 t, stroke length: 300 mm, table width: 3,000 mm, table length: 300 mm, table height: 400 mm, oil tank capacity: 16 l, total length: 1,500 mm, total width: 3,300 mm, total height: 2,000 mm, Equipment: CE marking, This used gluing press is fully functional and has been inspected in our workshop. The machine is specifically designed for pressing glued wooden parts into solid panels, table tops, and furniture components. Thanks to its vertical design, the available floor space is used optimally while maintaining a high production capacity. The press is equipped with six hydraulic cylinders that ensure even pressure distribution across the entire workpiece. With a total pressing force of up to 10 kg/cm2, the machine delivers consistent and high-quality pressing results. The robust steel construction guarantees years of reliable use, even under demanding production conditions. This used machine is in good technical condition and represents an attractive alternative to a new machine. As a result, you benefit from a reliable production solution at a competitive investment. Itsdpfjz U R Hmsx Ap Djn

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Iedpezca Uxefx Ap Dstn

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex-works: CNC Trumpf press brake Type Trumabend V 130 Year of manufacture 1996 CNC control Delem DA 65 Bending length 3060 mm Distance between uprights 2690 mm Upright overhang 410 mm Stroke 365 mm Installation height 535 mm Rapid traverse speed 200 mm/sec Working speed 1 – 10 mm/sec Return speed 135 mm/sec Itjdpfx Asz Tfrhop Den Table width 120 mm Angle adjustment plus/minus 10 mm Tools: one set of upper tools OW 209 with blade and one set of lower tools EV OO4/W 12, each 3000 mm Weight 12950 kg Price: EUR 10,750.00 plus VAT ex-works

Condition: like new (used), Year of construction: 2012, functionality: fully functional, overall weight: 9,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Dieffenbacher PO100 Pressing force 1000 kN / 100 tons Approach speed max. 300 mm/s Working speed max. 14 mm/s Connected power 30 kVA Stroke max. 500 mm Dwell time 95 ms Safety clearance 190 mm Tool height min. 200 mm, max. 700 mm Tool weight max. 1000 kg Tool length max. 1000 mm Tool width max. 700 mm Weight of upper part max. 500 kg Other: Light barriers, Siemens control system Iodpfsz Rzkhex Ap Detn In top condition!

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Itedpfx Apsz H I Dle Djn Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 4100 Press” Items for sale: 1 x Xerox Versant 4100 Press with the following specifications: incl. Paper Deck A-CF03/A-CF04 incl. Finisher A-GW04/A-GW07 Includes Stacker LCS-1 Includes SquareFold Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,571,697 pages Colour: Approx. 8,874,258 pages Black: Approx. 697,439 pages Isdpfx Apszmpbns Dstn Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 550 kg, Press for bin Ijdpfsz Tidujx Ap Dotn

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine + Press and Stacking Made in Germany. The world’s highest-class folding machine. The machine is ready for production. Infinitely variable feed and folding speed adjustment. 6-cassette module. Vacuum feeding Desta BAS 350 platen press HH 177 stacking delivery This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Maximum format: 350x500mm Weight: 650kg 380V power supply Itedpfoz R Ip Dox Ap Dsn

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake Iodpfjz I N D Nox Ap Dstn - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck

Condition: used, Year of construction: 1961, Used Machine Features and Technical Specifications: Itsdpfx Apjzyy Ape Dsn Pressing surface size: 2500 x 1300 mm Machine is designed for disassembly Total pressing force: 60 metric tons Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm L x W x H: approx. 3,230 x 1,340 x 1,775 mm Availability: immediately Location: Rhineland-Palatinate

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 105000, overall weight: 13,000 kg, Inotechno hydraulic press, 100-tonne capacity. Itjdez Tbnxepfx Ap Don

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Itedpfez Saqqox Ap Den

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. Itedownhvvepfx Ap Don - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Brand: Dixi Type: 16 S Pressing force: 5 tons Voltage: 400 Max. bale weight: 100-150 kg Machine dimensions: 147 x 80 x 196 cm Feed opening dimensions: 102.5 cm x 68 cm Machine weight: 840 kg More information available upon request. Iedpfx Aez T Dzbep Djtn

Condition: used, total length: 3,200 mm, total width: 1,450 mm, total height: 2,750 mm, Year of manufacture: 1979 Colour: Beige Weight: 7.000 kg - Year: 1979 - Serial number: 206k747 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 110 - Max. working width [mm]: 3100 Ijdjz R Dg Ejpfx Ap Dstn - Column gap [mm]: 2620 - Backgauge depth [mm]: 700 - Crowning system: None - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1450mm x 2750mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, machine/vehicle number: B0702A0516, functionality: fully functional, TRUMPF TruBend 7036 – CNC Press Brake – Year of manufacture 2011 – Extensive equipment Machine data Feature Description Manufacturer TRUMPF Model TruBend 7036 Year of manufacture 2011 Machine type CNC Press Brake Press force 360 kN (36 t) Bending length 1,020 mm Control system TRUMPF TASC 6000 Back gauge 6 axes Machine no. B0702A0516 Connection 400 V / 50 Hz Location Germany Description For sale is a TRUMPF TruBend 7036 from the year 2011 with extensive special equipment. The TruBend 7036 is a compact, high-precision CNC press brake that is particularly suitable for the economical processing of small and medium-sized sheet metal parts. Thanks to the electromechanical direct drive and the ergonomic design, the machine is ideal for precise and efficient bending operations. Equipment and special options Machine and control system - TRUMPF TASC 6000 CNC control system - 15-inch touchscreen - Graphical workshop programming - Electromechanical direct drive (torque motor) - High-precision length measuring system - 6-axis back gauge system - Bending line laser - BendGuard safety system (block laser) - Automatic tool clamping - Operating data acquisition - Work area lighting at the front and rear (LED) Ergonomics package - Comfort support table - Comfort footrest - Swiveling control unit - Seat and standing aid - Storage consoles - Document holders Productivity Plus Package - Graphical workshop programming - Automatic tool clamping - BendGuard (block laser) Extensive accessories Additional information The machine was originally ordered with extensive special equipment and is particularly suitable for: - Fine sheet metal processing - Precision bent parts - Small series production - Prototype construction - Complex bent parts For sale due to business closure. Itodpfsz S N Ecjx Ap Den

Condition: good (used), Year of construction: 2016, functionality: fully functional, TRUMPF TruBend 5170 Final Edition – 170 t – 3,230 mm – 6 axes – Year of manufacture: 2016 For sale is a TRUMPF TruBend 5170 Final Edition from the year 2016 with extensive special equipment. Itjdjz Tdhbopfx Ap Dsn The CNC press brake has a clamping force of 170 tons, a bending length of 3,230 mm, and a high-quality 6-axis back gauge system. Thanks to the electro-hydraulic 4-cylinder technology, the CNC crowning system, and the hydraulic tool clamping, the machine is suitable for demanding and precise bending operations. Technical data - Manufacturer: TRUMPF - Model: TruBend 5170 Final Edition - Year of manufacture: 2016 - Clamping force: 1,700 kN / 170 t - Bending length: 3,230 mm - CNC control: TRUMPF TASC 6000 - Back gauge: 6 axes - Drive: Electro-hydraulic with 4-cylinder technology - CNC crowning system - Hydraulic upper and lower tool clamping - Pneumatic lower tool displacement, 2 positions Special equipment - 6-axis back gauge system - TRUMPF TASC 6000 with graphic programming - TruTops Bend with TruTops CAD via network access - 15-inch touchscreen - MobileControl - CNC crowning system - BendGuard safety system - TCB – Thickness Controlled Bending - Two front support consoles - Additional foot switch - Work area lighting, front and rear - Optical setup and positioning aid - Oil cooler - Teleservice via internet - Hydraulic tool clamping Further information The machine was purchased as a new machine directly from TRUMPF in 2016. Original invoice and technical documentation are available. Inspection and further information by arrangement. Sale due to business closure.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Itjdpfx Asz S H U Usp Dsn Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Ijdpfotx T Tysx Ap Dotn